During boot the kernel module mpt3sas fails and none of the drives attached to my LSI 9211-8i are showing. This issue is not present in 6.9.2.
Output of `dmesg | grep mpt` in 6.10.0.rc2
root@Unraid:~# dmesg | grep mpt
[ 28.610928] mpt3sas version 37.101.00.00 loaded
[ 28.611004] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 28.611054] mpt3sas 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)
[ 28.611119] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32716840 kB)
[ 28.611130] mpt2sas_cm0: sending diag reset !!
[ 28.769963] mpt2sas_cm0: Invalid host diagnostic register value
[ 28.769967] mpt2sas_cm0: System Register set:
[ 28.770032] mpt2sas_cm0: diag reset: FAILED
[ 28.770097] mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:12209/_scsih_probe()!
Output of `dmesg | grep mpt` in 6.9.2
[ 17.941571] mpt3sas version 35.100.00.00 loaded
[ 17.941622] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 17.941667] mpt3sas 0000:01:00.0: enabling device (0000 -> 0002)
[ 17.941727] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32720908 kB)
[ 17.995343] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
[ 17.995349] mpt2sas_cm0: MSI-X vectors supported: 1
[ 17.995351] mpt2sas_cm0: 0 1
[ 17.995382] mpt2sas_cm0: High IOPs queues : disabled
[ 17.995383] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 128
[ 17.995385] mpt2sas_cm0: iomem(0x000000003fdc0000), mapped(0x00000000308fac09), size(16384)
[ 17.995386] mpt2sas_cm0: ioport(0x0000000000004000), size(256)
[ 18.049339] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
[ 18.076848] mpt2sas_cm0: scatter gather: sge_in_main_msg(1), sge_per_chain(9), sge_per_io(128), chains_per_io(15)
[ 18.076937] mpt2sas_cm0: request pool(0x000000006f881e1d) - dma(0xffe80000): depth(3492), frame_size(128), pool_size(436 kB)
[ 18.083282] mpt2sas_cm0: sense pool(0x00000000aa2471cf)- dma(0xff780000): depth(3367),element_size(96), pool_size(315 kB)
[ 18.083303] mpt2sas_cm0: config page(0x0000000010251823) - dma(0xff6fb000): size(512)
[ 18.083304] mpt2sas_cm0: Allocated physical memory: size(2514 kB)
[ 18.083306] mpt2sas_cm0: Current Controller Queue Depth(3364),Max Controller Queue Depth(3432)
[ 18.083307] mpt2sas_cm0: Scatter Gather Elements per IO(128)
[ 18.126919] mpt2sas_cm0: overriding NVDATA EEDPTagMode setting
[ 18.127233] mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00), ChipRevision(0x03), BiosVersion(07.39.02.00)
[ 18.127235] mpt2sas_cm0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[ 18.127654] mpt2sas_cm0: sending port enable !!
[ 19.666104] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x500605b007b96c30), phys(8)
[ 24.798902] mpt2sas_cm0: port enable: SUCCESS
[ 41.048186] Modules linked in: i915(+) iosf_mbi i2c_algo_bit drm_kms_helper drm intel_gtt md_mod agpgart syscopyarea sysfillrect sysimgblt fb_sys_fops ip6table_filter ip6_tables iptable_filter ip_tables x_tables bonding intel_wmi_thunderbolt wmi_bmof x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper rapl intel_cstate intel_uncore r8169 nvme i2c_i801 i2c_smbus i2c_core nvme_core realtek mpt3sas ahci raid_class libahci scsi_transport_sas fan wmi thermal video backlight button acpi_pad
diagnostic logs for 6.10.rc2 attached, let me know if any further information is needed, thanks!
Recommended Comments
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.