• [6.7.0-rc5/6] mpt3sas_cm0: fault_state(0x5862)

    d2dyno

    By d2dyno

      • Minor

    Today while running a large mover transfer, my system logs are being spammed with: 

    Mar 31 20:04:48 TheiaHD kernel: mpt3sas_cm0: fault_state(0x5862)!
Mar 31 20:04:48 TheiaHD kernel: mpt3sas_cm0: sending diag reset !!
Mar 31 20:04:49 TheiaHD kernel: mpt3sas_cm0: diag reset: SUCCESS
Mar 31 20:04:50 TheiaHD kernel: mpt3sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
Mar 31 20:04:50 TheiaHD kernel: mpt3sas_cm0: _base_display_fwpkg_version: complete
Mar 31 20:04:50 TheiaHD kernel: mpt3sas_cm0: LSISAS3224: FWVersion(16.00.01.00), ChipRevision(0x01), BiosVersion(00.00.00.00)
Mar 31 20:04:50 TheiaHD kernel: mpt3sas_cm0: Protocol=(
Mar 31 20:04:50 TheiaHD kernel: Initiator
Mar 31 20:04:50 TheiaHD kernel: ,Target
Mar 31 20:04:50 TheiaHD kernel: ), 
Mar 31 20:04:50 TheiaHD kernel: Capabilities=(
Mar 31 20:04:50 TheiaHD kernel: TLR
Mar 31 20:04:50 TheiaHD kernel: ,EEDP
Mar 31 20:04:50 TheiaHD kernel: ,Snapshot Buffer
Mar 31 20:04:50 TheiaHD kernel: ,Diag Trace Buffer
Mar 31 20:04:50 TheiaHD kernel: ,Task Set Full
Mar 31 20:04:50 TheiaHD kernel: ,NCQ
Mar 31 20:04:50 TheiaHD kernel: )
Mar 31 20:04:50 TheiaHD kernel: mpt3sas_cm0: sending port enable !!
Mar 31 20:04:53 TheiaHD kernel: igb 0000:05:00.0 eth1: Reset adapter
Mar 31 20:04:53 TheiaHD dhcpcd[3665]: eth1: carrier lost
Mar 31 20:04:57 TheiaHD kernel: igb 0000:05:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
Mar 31 20:04:57 TheiaHD dhcpcd[3665]: eth1: carrier acquired
Mar 31 20:04:58 TheiaHD dhcpcd[3665]: eth1: soliciting a DHCP lease
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: port enable: SUCCESS
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: search for end-devices: start
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:0: handle(0x0019), sas_addr(0x3000000080000000)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:0: enclosure logical id(0x5000000080000000), slot(3)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:1: handle(0x001a), sas_addr(0x3000000080000001)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:1: enclosure logical id(0x5000000080000000), slot(2)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:2: handle(0x001b), sas_addr(0x3000000080000002)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:2: enclosure logical id(0x5000000080000000), slot(0)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:3: handle(0x001c), sas_addr(0x3000000080000003)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:3: enclosure logical id(0x5000000080000000), slot(1)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:4: handle(0x001d), sas_addr(0x3000000080000004)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:4: enclosure logical id(0x5000000080000000), slot(7)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:5: handle(0x001e), sas_addr(0x3000000080000005)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:5: enclosure logical id(0x5000000080000000), slot(6)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:6: handle(0x001f), sas_addr(0x3000000080000006)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:6: enclosure logical id(0x5000000080000000), slot(4)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:8: handle(0x0020), sas_addr(0x3000000080000008)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:8: enclosure logical id(0x5000000080000000), slot(19)
Mar 31 20:04:59 TheiaHD kernel: 	handle changed from(0x0021)!!!
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:7: handle(0x0021), sas_addr(0x3000000080000007)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:7: enclosure logical id(0x5000000080000000), slot(5)
Mar 31 20:04:59 TheiaHD kernel: 	handle changed from(0x0020)!!!
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:9: handle(0x0022), sas_addr(0x300000008000000a)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:9: enclosure logical id(0x5000000080000000), slot(16)
Mar 31 20:04:59 TheiaHD kernel: 	handle changed from(0x0023)!!!
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:10: handle(0x0023), sas_addr(0x3000000080000009)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:10: enclosure logical id(0x5000000080000000), slot(18)
Mar 31 20:04:59 TheiaHD kernel: 	handle changed from(0x0022)!!!
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:11: handle(0x0024), sas_addr(0x300000008000000b)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:11: enclosure logical id(0x5000000080000000), slot(17)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:12: handle(0x0025), sas_addr(0x300000008000000c)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:12: enclosure logical id(0x5000000080000000), slot(23)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:13: handle(0x0026), sas_addr(0x300000008000000d)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:13: enclosure logical id(0x5000000080000000), slot(22)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:14: handle(0x0027), sas_addr(0x300000008000000e)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:14: enclosure logical id(0x5000000080000000), slot(20)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:15: handle(0x0028), sas_addr(0x300000008000000f)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:15: enclosure logical id(0x5000000080000000), slot(21)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:16: handle(0x0029), sas_addr(0x3000000080000010)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:16: enclosure logical id(0x5000000080000000), slot(11)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:17: handle(0x002a), sas_addr(0x3000000080000011)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:17: enclosure logical id(0x5000000080000000), slot(10)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:18: handle(0x002b), sas_addr(0x3000000080000012)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:18: enclosure logical id(0x5000000080000000), slot(8)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:19: handle(0x002c), sas_addr(0x3000000080000013)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:19: enclosure logical id(0x5000000080000000), slot(9)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:25: handle(0x002d), sas_addr(0x3000000080000014)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:25: enclosure logical id(0x5000000080000000), slot(15)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:21: handle(0x002e), sas_addr(0x3000000080000015)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:21: enclosure logical id(0x5000000080000000), slot(14)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:20: handle(0x002f), sas_addr(0x3000000080000016)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:20: enclosure logical id(0x5000000080000000), slot(12)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:22: handle(0x0030), sas_addr(0x3000000080000017)
Mar 31 20:04:59 TheiaHD kernel: scsi target12:0:22: enclosure logical id(0x5000000080000000), slot(13)
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: search for end-devices: complete
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: search for end-devices: start
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: search for PCIe end-devices: complete
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: search for expanders: start
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: search for expanders: complete
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: _base_fault_reset_work: hard reset: success
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: removing unresponding devices: start
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: removing unresponding devices: end-devices
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0:  Removing unresponding devices: pcie end-devices
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: removing unresponding devices: expanders
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: removing unresponding devices: complete
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: scan devices: start
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: 	scan devices: expanders start
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: 	break from expander scan: ioc_status(0x0022), loginfo(0x310f0400)
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: 	scan devices: expanders complete
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: 	scan devices: end devices start
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: 	break from end device scan: ioc_status(0x0022), loginfo(0x310f0400)
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: 	scan devices: end devices complete
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: 	scan devices: pcie end devices start
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: log_info(0x3003011d): originator(IOP), code(0x03), sub_code(0x011d)
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: log_info(0x3003011d): originator(IOP), code(0x03), sub_code(0x011d)
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: 	break from pcie end device scan: ioc_status(0x0021), loginfo(0x3003011d)
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: 	pcie devices: pcie end devices complete
Mar 31 20:04:59 TheiaHD kernel: mpt3sas_cm0: scan devices: complete
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:7:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:0:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:14:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:4:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:5:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:3:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:9:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:16:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:11:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:13:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:22:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:10:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:15:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:18:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:1:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:8:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:12:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:2:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:19:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:21:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:17:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:20:0: Power-on or device reset occurred
Mar 31 20:04:59 TheiaHD kernel: sd 12:0:6:0: Power-on or device reset occurred
Mar 31 20:05:02 TheiaHD kernel: igb 0000:05:00.0 eth1: Reset adapter

     

    theiahd-diagnostics-20190401-0114.zip

    Go to reports Prereleases

    User Feedback

    Recommended Comments

    d2dyno

    I saw this issue earlier yesterday when mover was running for the first time since I've been on RC5. Thinking maybe a kernel update would fix it, I updated to RC6. same error shortly after starting mover. Caused a drive to either fail or erroneously be marked as failed. Either way, I had to drop it from array and am now clearing it (also couldn't preclear without immediate pre-read error on RC).

     

    Trying to rule out software errors, I downgraded back to unraid stable (6.6.7), ran mover AND preclear simultaneously, and not a peep in the syslog. Will continue to monitor it, but I do believe this is an issue with the RC.

    Link to comment


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Restore formatting

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

    ×

  • Status Definitions

     

    Open = Under consideration.

     

    Solved = The issue has been resolved.

     

    Solved version = The issue has been resolved in the indicated release version.

     

    Closed = Feedback or opinion better posted on our forum for discussion. Also for reports we cannot reproduce or need more information. In this case just add a comment and we will review it again.

     

    Retest = Please retest in latest release.

    Priority Definitions

     

    Minor = Something not working correctly.

     

    Urgent = Server crash, data loss, or other showstopper.

     

    Annoyance = Doesn't affect functionality but should be fixed.

     

    Other = Announcement or other non-issue.