• Disk Spin up


    SimonF
    • Minor

    Hi

     

    I connected a flash drive to the system and UD detected.

     

    image.png.6fa8d0077ddcbdda000bef828c766cba.png

     

    It took a while for the page to refresh i.e. 20-30secs

     

    At this point the parity drive sdk had spun up and I have 4 drives showing in the UD on dashboard.

     

    image.png.f8435a580e010766dfc098e9fbc0de42.png

     

    Dev4 is sdk

     

    image.thumb.png.389459d766e3194974ba45e1c6234f14.png

     

    i have attached syslog for period of plugin.

     

    Unplugging flash drive Parity drive now shows active on dashboard and dev 3 and 4 disappear. 

     

    usbplugin_syslog.txt



    User Feedback

    Recommended Comments

    further testing I had sdk spun up. and issue didnt appear.

     

    Log with and without sdk spinning.

     

    Dec 13 15:23:23 Tower emhttpd: spinning up /dev/sdk
    Dec 13 15:23:34 Tower emhttpd: read SMART /dev/sdk
    Dec 13 15:23:34 Tower smartctl wrapper[8064]: caller is smartctl, grandpa is smartctl_type, device /dev/sdk, args "-A /dev/sdk"
    Dec 13 15:23:41 Tower kernel: usb 3-2: new high-speed USB device number 9 using xhci_hcd
    Dec 13 15:23:41 Tower kernel: usb-storage 3-2:1.0: USB Mass Storage device detected
    Dec 13 15:23:41 Tower kernel: scsi host11: usb-storage 3-2:1.0
    Dec 13 15:23:42 Tower kernel: scsi 11:0:0:0: Direct-Access     CBM      Flash Disk       5.00 PQ: 0 ANSI: 2
    Dec 13 15:23:42 Tower kernel: sd 11:0:0:0: Attached scsi generic sg13 type 0
    Dec 13 15:23:42 Tower kernel: sd 11:0:0:0: [sdm] 2011648 512-byte logical blocks: (1.03 GB/982 MiB)
    Dec 13 15:23:42 Tower kernel: sd 11:0:0:0: [sdm] Write Protect is off
    Dec 13 15:23:42 Tower kernel: sd 11:0:0:0: [sdm] Mode Sense: 0b 00 00 08
    Dec 13 15:23:42 Tower kernel: sd 11:0:0:0: [sdm] No Caching mode page found
    Dec 13 15:23:42 Tower kernel: sd 11:0:0:0: [sdm] Assuming drive cache: write through
    Dec 13 15:23:42 Tower kernel: sdm: sdm1
    Dec 13 15:23:42 Tower kernel: sd 11:0:0:0: [sdm] Attached SCSI removable disk
    Dec 13 15:23:43 Tower unassigned.devices: Disk with serial 'Flash_Disk_2009540011138507', mountpoint 'CBM_Flash_Disk' is not set to auto mount and will not be mounted.
    Dec 13 15:24:08 Tower hdparm wrapper[8658]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 13 15:24:08 Tower hdparm wrapper[8664]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 13 15:24:08 Tower hdparm wrapper[8669]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 13 15:24:08 Tower hdparm wrapper[8679]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 13 15:24:08 Tower hdparm wrapper[8699]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 13 15:24:08 Tower smartctl wrapper[8706]: caller is smartctl, grandpa is sh, device /dev/sdm, args "-n standby -c /dev/sdm"
    Dec 13 15:24:08 Tower smartctl wrapper[8707]: caller is smartctl, grandpa is sh, device /dev/sdm, args "-n standby -l error /dev/sdm"
    Dec 13 15:24:08 Tower hdparm wrapper[8711]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 13 15:24:08 Tower smartctl wrapper[8730]: caller is smartctl, grandpa is sh, device /dev/sdm, args "-n standby -l selftest /dev/sdm"
    Dec 13 15:24:08 Tower smartctl wrapper[8731]: caller is smartctl, grandpa is sh, device /dev/sdm, args "-n standby -A /dev/sdm"
    Dec 13 15:24:08 Tower smartctl wrapper[8738]: caller is smartctl, grandpa is sh, device /dev/sdm, args "-n standby -i /dev/sdm"
    Dec 13 15:24:08 Tower smartctl wrapper[8745]: caller is smartctl, grandpa is sh, device /dev/sdm, args "-n standby -c /dev/sdm"
    Dec 13 15:24:08 Tower hdparm wrapper[8773]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 13 15:24:08 Tower hdparm wrapper[8785]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 13 15:24:08 Tower smartctl wrapper[8790]: caller is smartctl, grandpa is sh, device /dev/sdm, args "-n standby -l selftest /dev/sdm"
    Dec 13 15:24:08 Tower smartctl wrapper[8798]: caller is smartctl, grandpa is sh, device /dev/sdm, args "-n standby -H /dev/sdm"
    Dec 13 15:24:38 Tower kernel: usb 3-2: USB disconnect, device number 9
    Dec 13 15:24:46 Tower emhttpd: cmd: /usr/local/emhttp/plugins/dynamix/scripts/tail_log syslog 
    Dec 13 15:25:50 Tower emhttpd: spinning down /dev/sdk
    Dec 13 15:25:50 Tower SAS Assist v0.8: Spinning down device /dev/sdk
    Dec 13 15:25:56 Tower kernel: usb 3-2: new high-speed USB device number 10 using xhci_hcd
    Dec 13 15:25:56 Tower kernel: usb-storage 3-2:1.0: USB Mass Storage device detected
    Dec 13 15:25:56 Tower kernel: scsi host11: usb-storage 3-2:1.0
    Dec 13 15:25:58 Tower kernel: scsi 11:0:0:0: Direct-Access     CBM      Flash Disk       5.00 PQ: 0 ANSI: 2
    Dec 13 15:25:58 Tower kernel: sd 11:0:0:0: Attached scsi generic sg13 type 0
    Dec 13 15:25:58 Tower kernel: sd 11:0:0:0: [sdm] 2011648 512-byte logical blocks: (1.03 GB/982 MiB)
    Dec 13 15:25:58 Tower kernel: sd 11:0:0:0: [sdm] Write Protect is off
    Dec 13 15:25:58 Tower kernel: sd 11:0:0:0: [sdm] Mode Sense: 0b 00 00 08
    Dec 13 15:25:58 Tower kernel: sd 11:0:0:0: [sdm] No Caching mode page found
    Dec 13 15:25:58 Tower kernel: sd 11:0:0:0: [sdm] Assuming drive cache: write through
    Dec 13 15:25:58 Tower kernel: sdm: sdm1
    Dec 13 15:25:58 Tower kernel: sd 11:0:0:0: [sdm] Attached SCSI removable disk
    Dec 13 15:25:58 Tower unassigned.devices: Disk with serial 'Flash_Disk_2009540011138507', mountpoint 'CBM_Flash_Disk' is not set to auto mount and will not be mounted.
    Dec 13 15:26:05 Tower kernel: sd 10:0:0:0: attempting task abort!scmd(0x00000000bb8871a4), outstanding for 7064 ms & timeout 7000 ms
    Dec 13 15:26:05 Tower kernel: sd 10:0:0:0: [sdk] tag#3907 CDB: opcode=0x12 12 01 00 00 fe 00
    Dec 13 15:26:05 Tower kernel: scsi target10:0:0: handle(0x0011), sas_address(0x5000c500626c01e9), phy(4)
    Dec 13 15:26:05 Tower kernel: scsi target10:0:0: enclosure logical id(0x500062b200597f00), slot(4) 
    Dec 13 15:26:05 Tower kernel: sd 10:0:0:0: task abort: SUCCESS scmd(0x00000000bb8871a4)
    Dec 13 15:26:23 Tower kernel: usb 3-2: USB disconnect, device number 10

    Link to comment
    Share on other sites

    Additional info. Added 2nd flash drive.

     

    With UD installed shows as sdn

    image.png.a2c2f59564eab06e005dd24e862006bc.png

     

    With UD uninstalled shows Dev3 & 5 but both show (sdm)

     

    image.png.62f219b975a9dcc2e5c06572c2d15864.png

    Link to comment
    Share on other sites

    Post the output of this command:

    cat /usr/local/emhttp/state/devs.ini

    The devices Unraid sees as unassigned are listed in this file.

     

    Then run this command and show the output from the above command:

    /usr/local/sbin/emcmd 'cmdHotplug=apply'

    Once I see the output from the devs.ini file before and after, I will know where to go with this issue.

    Link to comment
    Share on other sites

    This is with UD uninstalled.

     

    root@Tower:/usr/local# cat /usr/local/emhttp/state/devs.ini
    ["dev1"]
    name="dev1"
    id="Sony_Hard_Drive_235853211C8A-0:0"
    device="sdb"
    sectors="1953525164"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="430"
    numWrites="0"
    ["dev2"]
    name="dev2"
    id="HUS724030ALS640_P8K9ND8W_35000cca027baa9a8"
    device="sdi"
    sectors="5860533168"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="351"
    numWrites="0"
    root@Tower:/usr/local# /usr/local/sbin/emcmd 'cmdHotplug=apply'
    root@Tower:/usr/local# cat /usr/local/emhttp/state/devs.ini
    ["dev1"]
    name="dev1"
    id="Sony_Hard_Drive_235853211C8A-0:0"
    device="sdb"
    sectors="1953525164"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="430"
    numWrites="0"
    ["dev2"]
    name="dev2"
    id="HUS724030ALS640_P8K9ND8W_35000cca027baa9a8"
    device="sdi"
    sectors="5860533168"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="355"
    numWrites="0"
    ["dev5"]
    name="dev5"
    id="Generic_Flash_Disk_037388E2-0:0"
    device="sdm"
    sectors="3891200"
    sector_size="512"
    rotational="1"
    spundown="0"
    temp="*"
    numReads="80"
    numWrites="0"
    root@Tower:/usr/local# /usr/local/sbin/emcmd 'cmdHotplug=apply'
    root@Tower:/usr/local# cat /usr/local/emhttp/state/devs.ini
    ["dev1"]
    name="dev1"
    id="Sony_Hard_Drive_235853211C8A-0:0"
    device="sdb"
    sectors="1953525164"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="430"
    numWrites="0"
    ["dev2"]
    name="dev2"
    id="HUS724030ALS640_P8K9ND8W_35000cca027baa9a8"
    device="sdi"
    sectors="5860533168"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="359"
    numWrites="0"
    ["dev3"]
    name="dev3"
    id="CBM_Flash_Disk_2009540011138507-0:0"
    device="sdm"
    sectors="2011648"
    sector_size="512"
    rotational="1"
    spundown="0"
    temp="*"
    numReads="80"
    numWrites="0"
    ["dev5"]
    name="dev5"
    id="Generic_Flash_Disk_037388E2-0:0"
    device="sdm"
    sectors="3891200"
    sector_size="512"
    rotational="1"
    spundown="0"
    temp="*"
    numReads="80"
    numWrites="0"
    root@Tower:/usr/local# 

     

    Link to comment
    Share on other sites

    I need to see the output exactly as I asked in the previous post.  Don't install or uninstall UD.  Just run the three commands and show the results.  UD doesn't matter in this case.

     

    The before and after results tells me where the issue lies.

    Link to comment
    Share on other sites

    root@Tower:/usr/local/sbin# cat /usr/local/emhttp/state/devs.ini
    ["dev1"]
    name="dev1"
    id="Sony_Hard_Drive_235853211C8A-0:0"
    device="sdb"
    sectors="1953525164"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="430"
    numWrites="0"
    ["dev2"]
    name="dev2"
    id="HUS724030ALS640_P8K9ND8W_35000cca027baa9a8"
    device="sdi"
    sectors="5860533168"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="382"
    numWrites="0"
    ["dev4"]
    name="dev4"
    id="ST4000NM0023_35000c500626c01eb"
    device="sdk"
    sectors="7814037168"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="770"
    numWrites="211"
    root@Tower:/usr/local/sbin# /usr/local/sbin/emcmd 'cmdHotplug=apply'
    root@Tower:/usr/local/sbin# cat /usr/local/emhttp/state/devs.ini
    ["dev1"]
    name="dev1"
    id="Sony_Hard_Drive_235853211C8A-0:0"
    device="sdb"
    sectors="1953525164"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="430"
    numWrites="0"
    ["dev2"]
    name="dev2"

     

    Spins up sdk also, but doesnt unpdate green ball etc.
    id="HUS724030ALS640_P8K9ND8W_35000cca027baa9a8"
    device="sdi"
    sectors="5860533168"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="386"
    numWrites="0"
    ["dev4"]
    name="dev4"
    id="ST4000NM0023_35000c500626c01eb"
    device="sdk"
    sectors="7814037168"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="772"
    numWrites="211"
    root@Tower:/usr/local/sbin# 

    Edited by SimonF
    Link to comment
    Share on other sites

    Ok.  I think this is an Unraid related issue,  Try one more thing for me.  Remove the UD plugin, shutdown the array, and then see if the unassigned devices get straightened out.

    Link to comment
    Share on other sites

    Yes..

    But as soon as the hotplug update is called it adds the parity and spin it up.

     

    root@Tower:/usr/local/sbin# /usr/local/sbin/emcmd 'cmdHotplug=apply'
    root@Tower:/usr/local/sbin# cat /usr/local/emhttp/state/devs.ini
    ["dev1"]
    name="dev1"
    id="Sony_Hard_Drive_235853211C8A-0:0"
    device="sdb"
    sectors="1953525164"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="594"
    numWrites="0"
    ["dev2"]
    name="dev2"
    id="HUS724030ALS640_P8K9ND8W_35000cca027baa9a8"
    device="sdi"
    sectors="5860533168"
    sector_size="512"
    rotational="1"
    spundown="1"
    temp="*"
    numReads="690"
    numWrites="0"
    ["dev3"]
    name="dev3"
    id="ST4000NM0023_35000c500626c01eb"
    device="sdk"
    sectors="7814037168"
    sector_size="512"
    rotational="1"
    spundown="0"
    temp="*"
    numReads="1191"
    numWrites="411"

     

    image.png.39c51d917d6fc68d8fdfd9da73f958f6.png

    Edited by SimonF
    Link to comment
    Share on other sites

    Syslog info.

    ec 19 09:40:44 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:44 Tower smartctl wrapper[28322]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:40:45 Tower hdparm wrapper[28340]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:45 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:45 Tower smartctl wrapper[28349]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:40:46 Tower hdparm wrapper[28368]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:46 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:46 Tower smartctl wrapper[28377]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:40:47 Tower hdparm wrapper[28395]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:47 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:47 Tower smartctl wrapper[28404]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:40:48 Tower hdparm wrapper[28422]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:48 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:48 Tower smartctl wrapper[28431]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:40:49 Tower hdparm wrapper[28451]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:49 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:49 Tower smartctl wrapper[28460]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:40:50 Tower hdparm wrapper[28478]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:50 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:50 Tower smartctl wrapper[28487]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:40:51 Tower hdparm wrapper[28511]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:51 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:51 Tower smartctl wrapper[28520]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:40:52 Tower hdparm wrapper[28538]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:52 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:52 Tower smartctl wrapper[28547]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:40:53 Tower hdparm wrapper[28565]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:53 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:53 Tower smartctl wrapper[28574]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:40:54 Tower hdparm wrapper[28592]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:54 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:54 Tower smartctl wrapper[28601]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:40:55 Tower hdparm wrapper[28621]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:55 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:55 Tower smartctl wrapper[28630]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:40:56 Tower kernel: usb 3-2: USB disconnect, device number 7
    Dec 19 09:40:56 Tower hdparm wrapper[28656]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:56 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:56 Tower smartctl wrapper[28665]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"

     

    Disconnect USB Flash Drive.

     

    Dec 19 09:40:56 Tower kernel: usb 3-2: USB disconnect, device number 7
    Dec 19 09:40:56 Tower hdparm wrapper[28656]: caller is sdspin, grandpa is sdspin, device /dev/sdm, args "-C /dev/sdm"
    Dec 19 09:40:56 Tower emhttpd: read SMART /dev/sdm
    Dec 19 09:40:56 Tower smartctl wrapper[28665]: caller is smartctl_type, grandpa is emhttpd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:41:04 Tower kernel: sd 9:0:4:0: attempting task abort!scmd(0x000000007aafe6f4), outstanding for 7069 ms & timeout 7000 ms
    Dec 19 09:41:04 Tower kernel: sd 9:0:4:0: [sdi] tag#4822 CDB: opcode=0x12 12 01 00 00 fe 00
    Dec 19 09:41:04 Tower kernel: scsi target9:0:4: handle(0x000a), sas_address(0x5000c500626c01e9), phy(7)
    Dec 19 09:41:04 Tower kernel: scsi target9:0:4: enclosure logical id(0x5003048011c7eb00), slot(4)
    Dec 19 09:41:04 Tower kernel: sd 9:0:4:0: task abort: SUCCESS scmd(0x000000007aafe6f4)
    Dec 19 09:47:33 Tower kernel: usb 3-2: new high-speed USB device number 8 using xhci_hcd
    Dec 19 09:47:33 Tower kernel: usb-storage 3-2:1.0: USB Mass Storage device detected
    Dec 19 09:47:33 Tower kernel: scsi host11: usb-storage 3-2:1.0
    Dec 19 09:47:34 Tower kernel: scsi 11:0:0:0: Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2
    Dec 19 09:47:34 Tower kernel: sd 11:0:0:0: Attached scsi generic sg13 type 0
    Dec 19 09:47:34 Tower kernel: sd 11:0:0:0: [sdm] 2011648 512-byte logical blocks: (1.03 GB/982 MiB)
    Dec 19 09:47:34 Tower kernel: sd 11:0:0:0: [sdm] Write Protect is off
    Dec 19 09:47:34 Tower kernel: sd 11:0:0:0: [sdm] Mode Sense: 0b 00 00 08
    Dec 19 09:47:34 Tower kernel: sd 11:0:0:0: [sdm] No Caching mode page found
    Dec 19 09:47:34 Tower kernel: sd 11:0:0:0: [sdm] Assuming drive cache: write through
    Dec 19 09:47:34 Tower kernel: sdm: sdm1
    Dec 19 09:47:34 Tower kernel: sd 11:0:0:0: [sdm] Attached SCSI removable disk
    Dec 19 09:47:34 Tower unassigned.devices: Disk with serial 'Flash_Disk_2009540011138507', mountpoint 'CBM_Flash_Disk' is not set to auto mount and will not be mounted.
    Dec 19 09:47:37 Tower smartctl wrapper[30576]: caller is bash, grandpa is ttyd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:47:42 Tower smartctl wrapper[30599]: caller is bash, grandpa is ttyd, device /dev/sdm, args "-A /dev/sdm"
    Dec 19 09:47:48 Tower kernel: usb 3-2: USB disconnect, device number 8

    Link to comment
    Share on other sites

    Please post diags.  Not just syslog, need full diagnostics.zip.  Also remove sas spindown plugin for now.

    Link to comment
    Share on other sites
    On 12/13/2020 at 5:03 PM, dlandon said:

    /usr/local/sbin/emcmd 'cmdHotplug=apply'

    With testing with @dlandon it was this call. Even without UD plugin un-installed it created a new dev4 which was the parity.

     

    Have removed UD and SAS Spindown.

     

    Results before call.

    image.thumb.png.f115d74cf7180ce14b3dd0843c7b1def.pngimage.thumb.png.b29e3a696926a4b8416a23e39a0cf50d.png

     

    Results after.

     

    image.thumb.png.d861f506716276eee55f38cf648f047d.pngimage.thumb.png.91715a6719d4c69ef328fea6d65d616d.png

     

    If i click on Dev4, shows sdi.

    Name:

    Dev 4

    Identification:

    ST4000NM0023_35000c500626c01eb (sdi)

    tower-diagnostics-20201219-1654.zip

    Edited by SimonF
    Link to comment
    Share on other sites
    14 hours ago, dlandon said:

    Remove the iscsi plugins and see if it makes a difference.

    @limetech

     

    Testing carried out.

     

    Remove UD plugin, SAS Spindown plugin and the two iscsi ones.

     

    Reboot system.

     

    After reboot no temps showing, press spinup, all now showing temps and all disks spinning.

     

    run /usr/local/sbin/emcmd 'cmdHotplug=apply' 

     

    No change in displays either Dash or Main. Connect flash drive, run cmd flash drive appears, remove flash run cmd flash disappears. 

     

    Spindown all drives.

     

    call cmd without adding flash. Parity drive spins up, Dev4 appears. Following in syslog.

     

    Dec 20 12:19:49 Tower kernel: sd 5:0:4:0: attempting task abort!scmd(0x000000002459d201), outstanding for 7026 ms & timeout 7000 ms
    Dec 20 12:19:49 Tower kernel: sd 5:0:4:0: [sdi] tag#4034 CDB: opcode=0x12 12 01 00 00 fe 00
    Dec 20 12:19:49 Tower kernel: scsi target5:0:4: handle(0x000a), sas_address(0x5000c500626c01e9), phy(7)
    Dec 20 12:19:49 Tower kernel: scsi target5:0:4: enclosure logical id(0x5003048011c7eb00), slot(4)
    Dec 20 12:19:49 Tower emhttpd: ST4000NM0023_35000c500626c01eb (sdi) 512 7814037168
    Dec 20 12:19:49 Tower kernel: sd 5:0:4:0: task abort: SUCCESS scmd(0x000000002459d201)

     

    Dev4 shows as spinning in UDs

     

    Spinup drives. All spin up Parity shows as standby, but Dev4 is spinning.

     

     

    image.thumb.png.cee79d551c194938bbde89997ff8ee36.png

     

    With all disks spinning call cmd again returns to normal display.

     

    image.thumb.png.bf0e7c647b2db3dd14450311d8e21638.png

     

    Attached is a compiled current version of smartctl R5131 with the fix for SEAGATE drives and the wrappers I for hdparm and smartctl in /usr/sbin. Also a version of sdspin using smartctl options.

    tower-diagnostics-20201220-1234.zip Wrapper and Smartctl.zip

    Link to comment
    Share on other sites
    55 minutes ago, limetech said:

    I will try and reproduce.

    Looks like just Parity drive in my case needs to be spinning for the issue not to appear.

    Link to comment
    Share on other sites

    @limetech

     

    for status on sdspin are you looking at the output as well as the return code. I have noticed that my version of sdspin works, but it gets call every second for the one of the ATA drives and I can see usage. I am using smartctl -n standby so STANDBY is in the text rather than standby, RET is 2. if I change command executed for status to hdparm the issue stops.

    Link to comment
    Share on other sites
    On 12/20/2020 at 3:41 PM, limetech said:

    Thank you for detailed info, I will try and reproduce.

     

    Have you been able to find source of issue?

    Link to comment
    Share on other sites


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Restore formatting

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • Status Definitions

     

    Open = Under consideration.

     

    Solved = The issue has been resolved.

     

    Solved version = The issue has been resolved in the indicated release version.

     

    Closed = Feedback or opinion better posted on our forum for discussion. Also for reports we cannot reproduce or need more information. In this case just add a comment and we will review it again.

     

    Retest = Please retest in latest release.


    Priority Definitions

     

    Minor = Something not working correctly.

     

    Urgent = Server crash, data loss, or other showstopper.

     

    Annoyance = Doesn't affect functionality but should be fixed.

     

    Other = Announcement or other non-issue.