unraid keyboard/IPMI not working with 6.7-rc2/3 [SOLVED}

Bare metal hardware info

 

Motherboard:ASRockRack - E3C236D2I

Processor:Intel® Xeon® CPU E3-1240 v5 @ 3.50GHz

HVM:Enabled

IOMMU:Enabled

Cache:L1 Cache = 128 kB (max. capacity 128 kB)

L2 Cache = 1024 kB (max. capacity 1024 kB)

L3 Cache = 8192 kB (max. capacity 8192 kB)

Memory:32 GB (max. installable capacity 32 GB)

Quote

Also the IPMI (iLO) remote control keyboard does not work either after UNRAID boots.

Don't have any Asrock boards, but IPMI works fine with Supermicro boards and v6.7, did you check for bios and/or BMC firmware updates?

Thanks for checking,

 

I am running the latest BIOS/BMC versions

Edited February 14, 2019 by bit2bytes4fun

Then hopefully someone with the same board will confirm if it's a general problem or not.

Thanks,

 

I will wait and see if the developers confirm if its a problem.

I don't have the same board, but am also running 6.7-rc3 with the same USB keyboard lock up issue. Using Corsair k65, cheapo dell usb and logitech k800 wireless with unifing dongle. Same problem on two systems, one built prod box, one test bare bones box. SSH and gui mode works fine, console does not. 

 

supermicro c9z390-cg-o

i7-8700 (non-k)

corsair lpx ddr4 32gb 4x8gb 

evga gtx 1060-6gb-sc

syba/renesass usb3 pci card

soundblaster audigy2

lsi-9211-8i - p20 flash

intel dual nic 8257

870 nvme 500gb

860evo 500gb

6 seagate 'cuddas

sandisk micro 16gb (unraid fd)

 

intel dq67sw

i7-2600 (non-k)

crucial ddr3 16gb

samsung 860evo 250gb

sandisk micro 16gb (unraid fd)

 

Changed Status to Solved