• Unraid OS version 6.8.0-rc3 available


    limetech
    • Closed

    Q: -rc3?  what happened to -rc2?

    A: we thought a setting resulted in disabling auto-logout but instead made it happen almost immediately - sorry about that.

     

    Changes in [-rc2] are indicated in bold below.

     

    New in Unraid OS 6.8 release:

     

    The unRAIDServer.plg file (update OS) still downloads the new release zip file to RAM but then extracts directly to USB flash boot device.  You will probably notice a slight difference in speed of extract messages. [-rc2] The 'sync' command at the end has been replaced with 'sync -f /boot'.

     

    Forms based authentication
    If you have set a root password for your server, upon boot you'll now see a nice login form.  There still is only one user for Unraid so for username enter root.  This form should be compatible with all major password managers out there.  We always recommend using a strong password.  [-rc2] There is no auto-logout implemented yet, please click Logout on menu bar or completely close your browser to logout.

     

    Linux kernel 5.3

    • default scheduler now 'mq-deadline' [-rc2] but this can be changed via Settings/Disk Settings/Scheduler setting.
    • enabled Huge Page support, though no UI control yet
    • binfmt_misc support
    • added "Vega 10 Reset bug" [-rc2] and 'navi-reset' patches
    • [-rc2] added oot: Realtek r8125: version 9.002.02
    • more device drivers

     

    Some out-of-tree (oot) drivers are currently omitted either because the source code doesn't compile or driver doesn't work with the 5.3 kernel:

    • Intel ixgbe [does not build] (using in-tree driver)
    • Highpoint r750 [does not work]
    • Highpoint rr3740a [does not build]

     

    This is always the risk with including vendor-supplied drivers.  Until the vendor fixes their code we must omit their driver.

     

    md/unraid driver
    Introduced "multi-stream" support:

    • Reads on devices which are not being written should run at full speed.  In addition, if you have set the md_write_method tunable to "reconstruct write", then while writing, if any read streams are detected, the write method is switched to "read/modifywrite".
    • Parity sync/check should run at full speed by default.
    • Parity sync/check can be throttled back in presence of other active streams.
    • The "stripe pool" resource is automatically shared evenly between all active streams.

     

    As a result got rid of some Tunables:

    • md_sync_window
    • md_sync_thresh

    and added some tunables:

    • md_queue_limit
    • md_sync_limit
    • [-rc2] md_scheduler

     

    Please refer to Settings/Disk Settings help text for description of these settings.

     

    Remaining issue: some users have reported slower parity sync/check rates for very wide arrays (20+ devices) vs. 6.7 and earlier releases - we are still studying this problem.


    WireGuard support - available as a plugin via Community Apps.  Our WireGuard implementation and UI is still a work-in-process; for this reason we have made this available as a plugin, though the latest WireGuard module is included in our Linux kernel.  Full WireGuard implementation will be merged into Unraid OS itself in a future release.  I want to give special thanks to @bonienl who wrote the plugin with lots of guidance from @ljm42 - thank you!  I also should give a shout out to @NAS who got us rolling on this.  If you don't know about WireGuard it's something to look into!

     

    Guide here:


    WS-Discovery support - Finally you can get rid of SMBv1 and get reliable Windows network discovery.  This feature is configured on the Settings/SMB Settings page and enabled by default.

    • Also on same settings page is Enable NetBIOS setting.  This is enabled by default, however if you no longer have need for NetBIOS discovery you can turn it off.  When turned off, Samba is configured to accept only SMBv2 protocol and higher.
    • Added mDNS client support in Unraid OS.  This means, for example, from an Unraid OS terminal session to ping another Unraid OS server on your network you can use (e.g., 'tower'):
      ping tower.local
      instead of
      ping tower
      Note the latter will still work if you have NetBIOS enabled.

     

    User Share File System (shfs) changes:

    • Integrated FUSE-3 - This should increase performance of User Share File System somewhat.
    • Fixed bug with hard link support.  Previously a 'stat' on two directory entries referring to same file would return different i-node numbers, thus making it look like two independent files.  This has been fixed however there is a config setting on Settings/Global Share Settings called "Tunable (support hard links)".  [-rc2 ] Fixed the default value Yes, but with certain very old media and DVD players which access shares via NFS, you may need to set this to No.
    • Note: if you have custom config/extra.cfg file, get rid of it.


    Other improvements/bug fixes:

    • Format - during Format any running parity sync/check is automatically Paused and then resumed upon Format completion.
    • Encryption - an entered passphrase is not saved to any file.  Also included an API for Unassigned devices plugin to open encrypted volumes.
    • Fixed bug where multi-device btrfs pool was leaving metadata set to dup instead of raid1.
    • Several other small bug fixes and improvements.
    • Numerous base package updates [-rc2] including updating PHP to version 7.3.x and Samba to version 4.11.x.

     

    Finally - please note that AFP is now deprecated and we plan to remove in Unraid 6.9 release.

     

    Version 6.8.0-rc3 2019-10-17

    Management:

    • php: set very long session timeout

     

    Version 6.8.0-rc2 2019-10-17

    Base distro:

    • aaa_elflibs: version 15.0 build 15
    • at-spi2-atk: version 2.34.1
    • binutils: version 2.33.1
    • gdk-pixbuf2: version 2.40.0
    • glib2: version 2.62.1
    • harfbuzz: version 2.6.2
    • icu4c: version 65.1
    • kernel-firmware: version 20191008_aa95e90
    • libX11: version 1.6.9
    • librsvg: version 2.46.1
    • libvirt-php: version 20190803
    • openssh: version 8.1p1
    • php: version 7.3.10
    • pkgtools: version 15.0 build 25
    • samba: version 4.11.0 (CVE-2019-10197)
    • sqlite: version 3.30.1
    • ttyd: version 20191001
    • wireguard: version 0.0.20191012
    • xfsprogs: version 5.2.1

    Linux kernel:

    • change schedulers from modules to built-ins
    • patch: navi_reset (user request)
    • oot: Realtek r8125: version 9.002.02

    Management:

    • add 'scheduler' tunable for array devices
    • fix shfs hard link initially reported as enabled but not actually enabled
    • nginx: disable php session expiration
    • unRAIDServer.plg (update OS) now executes 'sync -f /boot' instead of full sync at end of update
    • webgui: Improve Use Cache option
    • webgui: other minor text corrections
    • webgui: Dashboard: add up/down arrows to VPN tunnel traffic

     

    Version 6.8.0-rc1 2019-10-11

    Base distro:

    • aaa_elflibs: version 15.0 build 11
    • acpid: version 2.0.32
    • at-spi2-atk: version 2.34.0
    • at-spi2-core: version 2.34.0
    • atk: version 2.34.1
    • bash: version 5.0.011
    • btrfs-progs: version 5.2.2
    • bzip2: version 1.0.8
    • ca-certificates: version 20190826
    • cifs-utils: version 6.9
    • cryptsetup: version 2.2.1
    • curl: version 7.66.0
    • dbus: version 1.12.16
    • dbus-glib: version 0.110
    • dhcpcd: version 8.0.6
    • docker: version 19.03.3
    • e2fsprogs: version 1.45.4
    • encodings: version 1.0.5
    • etc: version 15.0
    • ethtool: version 5.3
    • expat: version 2.2.9
    • file: version 5.37
    • findutils: version 4.7.0
    • freetype: version 2.10.1
    • fuse3: version 3.6.2
    • gdbm: version 1.18.1
    • gdk-pixbuf2: version 2.38.2
    • git: version 2.23.0
    • glib2: version 2.62.0
    • glibc-solibs: version 2.30
    • glibc-zoneinfo: version 2019c
    • glibc: version 2.30
    • glu: version 9.0.1
    • gnutls: version 3.6.10
    • gtk+3: version 3.24.10
    • harfbuzz: version 2.6.0
    • haveged: version 1.9.8
    • hostname: version 3.22
    • hwloc: version 1.11.13
    • icu4c: version 64.2
    • intel-microcode: version 20190918
    • iproute2: version 5.3.0
    • iptables: version 1.8.3
    • iputils: version 20190709
    • irqbalance: version 1.6.0
    • less: version 551
    • libICE: version 1.0.10
    • libX11: version 1.6.8
    • libXi: version 1.7.10
    • libXt: version 1.2.0
    • libarchive: version 3.4.0
    • libcap-ng: version 0.7.10
    • libcroco: version 0.6.13
    • libdrm: version 2.4.99
    • libedit: version 20190324_3.1
    • libevdev: version 1.7.0
    • libevent: version 2.1.11
    • libgcrypt: version 1.8.5
    • libgudev: version 233
    • libjpeg-turbo: version 2.0.3
    • libnftnl: version 1.1.4
    • libnl3: version 3.5.0
    • libpcap: version 1.9.1
    • libpciaccess: version 0.16
    • libpng: version 1.6.37
    • libpsl: version 0.21.0
    • librsvg: version 2.44.14
    • libseccomp: version 2.4.1
    • libssh2: version 1.9.0
    • libtasn1: version 4.14
    • libusb: version 1.0.23
    • libvirt-php: version 0.5.5
    • libvirt: version 5.7.0 (CVE-2019-10161, CVE-2019-10166, CVE-2019-10167, CVE-2019-10168)
    • libwebp: version 1.0.3
    • libzip: version 1.5.2
    • logrotate: version 3.15.1
    • lsof: version 4.93.2
    • lsscsi: version 0.30
    • lvm2: version 2.03.05
    • lz4: version 1.9.1
    • mkfontscale: version 1.2.1
    • mozilla-firefox: version 68.0.2 (CVE-2019-11751, CVE-2019-11746, CVE-2019-11744, CVE-2019-11742, CVE-2019-11736, CVE-2019-11753, CVE-2019-11752, CVE-2019-9812, CVE-2019-11741, CVE-2019-11743, CVE-2019-11748, CVE-2019-11749, CVE-2019-5849, CVE-2019-11750, CVE-2019-11737, CVE-2019-11738, CVE-2019-11747, CVE-2019-11734, CVE-2019-11735, CVE-2019-11740, CVE-2019-11754, CVE-2019-9811, CVE-2019-11711, CVE-2019-11712, CVE-2019-11713, CVE-2019-11714, CVE-2019-11729, CVE-2019-11715, CVE-2019-11716, CVE-2019-11717, CVE-2019-1 1718, CVE-2019-11719, CVE-2019-11720, CVE-2019-11721, CVE-2019-11730, CVE-2019-11723, CVE-2019-11724, CVE-2019-11725, CVE-2019-11727, CVE-2019-11728, CVE-2019-11710, CVE-2019-11709)
    • nano: version 4.5
    • ncurses: version 6.1_20190720
    • net-tools: version 20181103_0eebece
    • nettle: version 3.5.1
    • nghttp2: version 1.39.2
    • nginx: version 1.16.1 (CVE-2019-9511, CVE-2019-9513, CVE-2019-9516)
    • nodejs: version 10.16.3
    • nss-mdns: version 0.14.1
    • ntp: version 4.2.8p13
    • openldap-client: version 2.4.48
    • openssh: version 8.0p1
    • openssl-solibs: version 1.1.1d
    • openssl: version 1.1.1d
    • p11-kit: version 0.23.18.1
    • pcre2: version 10.33
    • php: version 7.2.23 (CVE-2019-11042, CVE-2019-11041)
    • pixman: version 0.38.4
    • pkgtools: version 15.0
    • procps-ng: version 3.3.15
    • qemu: version 4.1.0 (CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091)
    • qrencode: version 4.0.2
    • rpcbind: version 1.2.5
    • rsyslog: version 8.1908.0
    • samba: version 4.10.8 (CVE-2019-10197)
    • sdparm: version 1.10
    • sessreg: version 1.1.2
    • setxkbmap: version 1.3.2
    • sg3_utils: version 1.44
    • shadow: version 4.7
    • shared-mime-info: version 1.12
    • sqlite: version 3.29.0
    • sysvinit-scripts: version 2.1
    • sysvinit: version 2.96
    • talloc: version 2.3.0
    • tdb: version 1.4.2
    • tevent: version 0.10.1
    • ttyd: version 1.5.2
    • usbutils: version 012
    • util-linux: version 2.34
    • wget: version 1.20.3
    • wireguard: version 0.0.20190913
    • wsdd: version 20180618 build 2
    • xauth: version 1.1
    • xclock: version 1.0.9
    • xfsprogs: version 5.2.1
    • xkeyboard-config: version 2.27
    • xorg-server: version 1.20.5
    • xrandr: version 1.5.1
    • xterm: version 348
    • xwininfo: version 1.1.5
    • zstd: version 1.4.3

    Linux kernel:

    • version 5.3.6
    • default scheduler now mq-deadline
    • CONFIG_BINFMT_MISC: Kernel support for MISC binaries
    • CONFIG_DEBUG_FS: Debug Filesystem
    • CONFIG_HUGETLBFS: HugeTLB file system support
    • CONFIG_ICE: Intel(R) Ethernet Connection E800 Series Support
    • CONFIG_IGC: Intel(R) Ethernet Controller I225-LM/I225-V support
    • CONFIG_MLX5_CORE_IPOIB: Mellanox 5th generation network adapters (connectX series) IPoIB offloads support
    • CONFIG_SCSI_SMARTPQI: Microsemi PQI Driver
    • CONFIG_WIREGUARD: IP: WireGuard secure network tunnel
    • patch: fix_vega_reset (user request)
    • patch: increase BLK_MAX_REQUEST_COUNT from 16 to 32
    • oot: LimeTech md/unraid: version 2.9.10 (multi-stream support)
    • oot: Highpoint rsnvme: version v1.2.16_19_05_06
    • oot: Tehuti tn40xx: version 0.3.6.17.2
    • oot: omitted: Intel ixgbe [does not build] (using in-tree driver)
    • oot: omitted: Highpoint r750 [does not work]
    • oot: omitted: Highpoint rr3740a [does not build]

    Management:

    • fix btrfs bug where converting from single to multiple pool did not balance metadata to raid1, and converting from multiple to single did not balance metadata back to single.
    • auto-mount hugetlbfs to support kernel huge pages
    • emhttpd: do not write /root/keyfile if encryption passphrase provided via webGUI
    • fstab: mount USB flash boot device with root-only access
    • nginx.conf: configure all nginx worker threads to run as 'root'.
    • start/stop WireGuard upon server start/shutdown
    • support forms-based authentication
    • shfs: support FUSE3 API changes; hard links report same st_ino; hard link support configurable
    • support disabling NetBIOS, and set Samba 'min server procotol' and 'min client protocol' to SMB2 if disabled
    • support WS-Discovery method
    • support mDNS local name resolution via avahi
    • extract OS upgrade directly to USB flash
    • webgui: Revamp Banner Warning System
    • webgui: Fix custom case png not surviving reboot
    • webgui: Enhanced display of network settings
    • webgui: Open banner system to 3rd party apps
    • webgui: Modified notify script to allow overriding email recipients in notification settings
    • webgui: Allow Safari to use websockets
    • webgui: Select case correction + replace MD1510 for AVS-10/4
    • webgui: Font, Icon and image cleanup
    • webgui: Added AFP deprecated notice
    • webgui: Changed config folder of TELEGRAM
    • webgui: Add share access to user edit
    • webgui: Added cache and disk type to shares page
    • webgui: Aligned management page layout
    • webgui: Added conditional UPnP setting on Management page
    • webgui: Support wireguard plugin in download.php
    • webgui: Added UPnP to access script (to support WireGuard plugin)
    • webgui: Made notify script compatible with 6.8 new security scheme
    • webgui: Fixed misalignment of absent disk on Main page
    • webgui: Update ArrayDevices.page help text
    • webgui: show warning on login page when browser cookies are disabled
    • webgui: Fixed docker container update state
    • webgui: Added VM XML files to diagnostics
    • webgui: Telegram notification agent: enable group chat IDs, update helper description
    • webgui: Integrate CAs Plugin Helper
    • webgui: Switch download routine to be PHP Curl
    • webgui: Change PluginHelpers download to be PHP Curl
    • webgui: dockerMan - Deprecate TemplateURL
    • webgui: Fixed: footer always on foreground
    • webgui: Plugin Helpers: Follow redirects on downloads
    • webgui: dockerMan: Redownload Icon if URL changes
    • webgui: If a page is loaded via https, prevent it from loading resources via http (ie, block mixed content)
    • webgui: Ensure spinner always ontop
    • webgui: Allow outside click to close popups
    • webgui: Use complete HTML documents in popups
    • webgui: Standardize on lang="en"
    • webgui: Added 'F1' key to toggle help text
    • webgui: Main page: consolidate spin up/down action and device status into one
    • webgui: support changed tunables on Disk Settings page
    • Thanks 2


    User Feedback

    Recommended Comments



    41 minutes ago, sittingmongoose said:

    Where is that setting?  Is that a plugin?  Also, I’m going to post diagnostics later today!

    As a result got rid of some Tunables:

    md_sync_window

    md_sync_thresh

    and added some tunables:

    md_queue_limit

    md_sync_limit

    [-rc2] md_scheduler

    Link to comment
    Share on other sites

    I am sorry, Im not following what you're saying.  I found those settings in disk settings.  Are you removing settings?  or adjusting values?

     

    Also, I didn't upload diagnostics yet because I haven't upgraded to rc3 yet from rc1.  I am waiting on nvidias plugin to come back from the digital ocean outage.

    Link to comment
    Share on other sites
    1 minute ago, sittingmongoose said:

    I am sorry, Im not following what you're saying.  I found those settings in disk settings.  Are you removing settings?  or adjusting values?

     

    Also, I didn't upload diagnostics yet because I haven't upgraded to rc3 yet from rc1.  I am waiting on nvidias plugin to come back from the digital ocean outage.

    adjusting values

    Link to comment
    Share on other sites
    10 minutes ago, sittingmongoose said:

    thanks, Any help on what you adjusted them to?  or does It vary wildly with configuration?

    Those with "user-set" means changed, I simple set all in 10x ( no evaluate ). Some discussion post your may ref. too.

     

    s.PNG.0ef8e2388955c575f3392ba15735748d.PNG

    Link to comment
    Share on other sites
    35 minutes ago, sittingmongoose said:

    Also, I didn't upload diagnostics yet because I haven't upgraded to rc3 yet from rc1.  I am waiting on nvidias plugin to come back from the digital ocean outage.

    That's an unofficial build, and while they try to make it as close as possible while adding nvidia support, it's not completely the same code as the limetech build. You need to duplicate the issue and post diagnostics with the official rc3.

    • Thanks 1
    Link to comment
    Share on other sites

    if I click on dashbaord or type https://192.168.1.200/Dashboard

    This sends me to the login page. -> https://192.168.1.200/login

     

    Also I get this on the error log, probably not related

     

    Oct 19 19:13:13 Unraid root: error: /plugins/dynamix.docker.manager/include/UpdateConfig.php: wrong csrf_token
    Oct 19 19:13:15 Unraid root: error: /webGui/include/Notify.php: wrong csrf_token
    Oct 19 19:13:15 Unraid root: error: /plugins/dynamix.docker.manager/include/UpdateConfig.php: wrong csrf_token
    Oct 19 19:13:16 Unraid root: error: /plugins/dynamix.system.temp/include/SystemTemp.php: wrong csrf_token
    Oct 19 19:13:16 Unraid root: error: /webGui/include/Notify.php: wrong csrf_token
    Oct 19 19:13:23 Unraid kernel: veth1870321: renamed from eth0
    Oct 19 19:13:24 Unraid kernel: eth0: renamed from veth1fa4c7e
    Oct 19 19:13:37 Unraid root: error: /plugins/dynamix.docker.manager/include/UpdateConfig.php: wrong csrf_token
    Oct 19 19:13:41 Unraid root: error: /webGui/include/Notify.php: wrong csrf_token
    Oct 19 19:13:41 Unraid root: error: /plugins/dynamix.docker.manager/include/UpdateConfig.php: wrong csrf_token
    Oct 19 19:13:41 Unraid root: error: /plugins/dynamix.system.temp/include/SystemTemp.php: wrong csrf_token
    Oct 19 19:13:41 Unraid root: error: /webGui/include/Notify.php: wrong csrf_token
    Oct 19 19:13:43 Unraid root: error: /plugins/dynamix.docker.manager/include/DockerUpdate.php: wrong csrf_token
    Oct 19 19:13:44 Unraid root: error: /plugins/dynamix.docker.manager/include/UpdateConfig.php: wrong csrf_token
    Oct 19 19:13:47 Unraid root: error: /plugins/dynamix.docker.manager/include/DockerUpdate.php: wrong csrf_token
    Oct 19 19:13:47 Unraid root: error: /plugins/dynamix.docker.manager/include/UpdateConfig.php: wrong csrf_token
    Oct 19 19:13:48 Unraid root: error: /plugins/dynamix.docker.manager/include/DockerUpdate.php: wrong csrf_token
    Oct 19 19:13:48 Unraid root: error: /plugins/dynamix.docker.manager/include/UpdateConfig.php: wrong csrf_token
    Oct 19 19:13:51 Unraid root: error: /plugins/dynamix.system.temp/include/SystemTemp.php: wrong csrf_token
    Oct 19 19:13:55 Unraid root: error: /plugins/dynamix.docker.manager/include/UpdateConfig.php: wrong csrf_token
    Oct 19 19:14:01 Unraid root: error: /plugins/dynamix.docker.manager/include/UpdateConfig.php: wrong csrf_token
    Oct 19 19:14:02 Unraid root: error: /webGui/include/Notify.php: wrong csrf_token
    Oct 19 19:14:02 Unraid root: error: /plugins/dynamix.docker.manager/include/UpdateConfig.php: wrong csrf_token
    Oct 19 19:14:02 Unraid root: error: /webGui/include/Notify.php: wrong csrf_token
    Oct 19 19:14:02 Unraid root: error: /plugins/dynamix.system.temp/include/SystemTemp.php: wrong csrf_token

     

    Edited by L0rdRaiden
    Link to comment
    Share on other sites

    All working for me, had some issues with megaraid_sas failing to load firmware but all fixed after reseating the card. WireGuard is also working a treat 😊 The new login screen seems to have some issues with mobile Safari - eg if I select logs or a anything that opens as a pop up it asks me to login again and send me to the home page.

    Edited by GreySyntax
    Link to comment
    Share on other sites
    8 hours ago, Benson said:

    Those with "user-set" means changed, I simple set all in 10x ( no evaluate ). Some discussion post your may ref. too.

     

    s.PNG.0ef8e2388955c575f3392ba15735748d.PNG

    The value of 800 doesn't make sense for md_queue_limit. According to the GUI Help the valid range is 1 to 100 as it's specified as a percentage.

    Link to comment
    Share on other sites
    9 hours ago, John_M said:

    The value of 800 doesn't make sense for md_queue_limit. According to the GUI Help the valid range is 1 to 100 as it's specified as a percentage.

    Correct, setting it any higher than 100 will result in a setting of 100, and you probably want to keep it lower than 100%.

    Link to comment
    Share on other sites
    Quote

    WS-Discovery support - Finally you can get rid of SMBv1 and get reliable Windows network discovery.  This feature is configured on the Settings/SMB Settings page and enabled by default.

    Also on same settings page is Enable NetBIOS setting.  This is enabled by default, however if you no longer have need for NetBIOS discovery you can turn it off.  When turned off, Samba is configured to accept only SMBv2 protocol and higher.

    Added mDNS client support in Unraid OS.  This means, for example, from an Unraid OS terminal session to ping another Unraid OS server on your network you can use (e.g., 'tower'):

    ping tower.local

    instead of

    ping tower

    Note the latter will still work if you have NetBIOS enabled.

    I cannot get my DUNE players to connect to 6.8.0-rc3.  As soon as I drop back to 6.6.7 the DUNE players work fine again.

     

    BRiT suggested it may have to do with the above so I just reinstalled 6.8.0-rc3 again and played with the SMB settings.  This got me nowhere.  I first tried disabling Enable WSD and that did not work.  I tried disabling NetBIOS just for the heck of it and that of course did not help.  I basically tried all the combinations even if they did not make sense.

     

    I am not positive, but I think the DUNE players do use SMBv1.  How can I make this work?

     

    Thanks,

    craigr

    syslog

    Link to comment
    Share on other sites

    Maybe name resolving is not working for you.

    My dune players use the IP address of the server to connect, this works fine.

     

    Link to comment
    Share on other sites

    I noticed that I have the following line in my smb-extra.conf file:

    allocation roundup size = 4096

    I must have put it there for some very good but now forgotten reason. Should I remove it now?

    Link to comment
    Share on other sites
    16 minutes ago, bonienl said:

    Maybe name resolving is not working for you.

    My dune players use the IP address of the server to connect, this works fine.

     

    Well, my DUNE players use the IP address of the unRAID server too.  Also, when I go into "network browser > network places" in the DUNE the network places folder is empty.

     

    This is strange.  As soon as I go back to 6.6.7 I't all fine again.

     

    grrr.

     

    craigr

    Link to comment
    Share on other sites
    4 minutes ago, craigr said:

    the DUNE the network places folder is empty.

    not for me.

    What type of Dune players do you have (I have the latest HD series)?

    Link to comment
    Share on other sites
    1 minute ago, bonienl said:

    not for me.

    What type of Dune players do you have (I have the latest HD series)?

    I have three BASE 3.0's and a Smart D1.  I haven't updated the FW on the players since 2015 because there have been no new features I am interested in.  I am updating one of them now to the latest 2019 beta to see if this helps.

     

    Will report back shortly.

     

    Thanks,

    craigr

    Link to comment
    Share on other sites

    Firmware update did not help the DUNE players.  Still cannot access unRAID.

     

    In the unRAID SMB settings do you have "Enable WSD:" set to "yes" or set to "no" as I have tried both since updating the DUNE FW and neither work.

     

    Best,

    craigr

    Edited by craigr
    Link to comment
    Share on other sites
    42 minutes ago, John_M said:

    I noticed that I have the following line in my smb-extra.conf file:

    
    allocation roundup size = 4096

    I must have put it there for some very good but now forgotten reason. Should I remove it now?

     

    That corrects the discrepancy between storage usage for a file as viewed by windows vs. reality.  That exact line is already added to default Unraid smb configuration.

    • Thanks 1
    Link to comment
    Share on other sites

    If you are having issues with shares being detected please post output of this command:

    testparm -sv

     

    You can direct to a file on your flash like this:

     

    testparm -sv >/boot/testparm.txt

     

    Note this will reveal your share names but not any share data ;)

    Link to comment
    Share on other sites



    Guest
    This is now closed for further comments

  • Status Definitions

     

    Open = Under consideration.

     

    Solved = The issue has been resolved.

     

    Solved version = The issue has been resolved in the indicated release version.

     

    Closed = Feedback or opinion better posted on our forum for discussion. Also for reports we cannot reproduce or need more information. In this case just add a comment and we will review it again.

     

    Retest = Please retest in latest release.


    Priority Definitions

     

    Minor = Something not working correctly.

     

    Urgent = Server crash, data loss, or other showstopper.

     

    Annoyance = Doesn't affect functionality but should be fixed.

     

    Other = Announcement or other non-issue.