• [6.9.2] Parity Drive will not spin down via GUI or Schedule

    SimonF

    By SimonF

      • Minor

    Since upgrading to 6.9.2 I cannot spin down parity via GUI, as soon as I spin down it comes back up.

     

    Apr 8 10:18:45 Tower emhttpd: spinning down /dev/sdf
    Apr 8 10:18:58 Tower SAS Assist v0.85: Spinning down device /dev/sdf
    Apr 8 10:18:58 Tower emhttpd: read SMART /dev/sdf

     

    Revert to 6.9.1 issue no longer happens.

     

    I can manually spin down the drive. All other array drives which are also SAS spin down fine.

    root@Tower:~# sg_start -rp 3 /dev/sdf
    root@Tower:~# sdparm -C sense /dev/sdf
        /dev/sdf: SEAGATE   ST4000NM0023      XMGJ
    Additional sense: Standby condition activated by command

     

     

    Also is it possible to get an updated version of smartctl added.

     

    Will continue to do more testing.

     

    Go to reports Stable Releases

    User Feedback

    Recommended Comments



    SimonF
    18 hours ago, chris0583 said:

    I did see that Areca has a "Driver" for 6.10.  Does this drive differ from what is in the main distro? 

     

    image.thumb.png.b3d00c8fce4e3eef682a61e439f7e09e.png

    Yes looks like currently in 6.10.2 is 1.50.0x.05 but will have a look into it.

    Link to comment
    Aleas

    I have the exact same issue here.  I've tried installing the Areca drivers for 6.10 and installed the latest firmware. but the drives still don't spin down.

    Edited by Aleas
    Link to comment
    trurl
    5 minutes ago, Aleas said:

    don't mind the 1 failed drive

    I assume you know that any access to that drive will require all disks to spin? Maybe even access to any user share will. Replace the drive and see if you still have a problem

    Link to comment
    Ralf.

    I can report the same issue, here on Unraid 6.11.5, parity drive is not spinning down anymore. Simple sata drive (Seagate Ironwolf) connect to onboard sata port.

    Edited by Ralf.
    Link to comment


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Restore formatting

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

    ×

  • Status Definitions

     

    Open = Under consideration.

     

    Solved = The issue has been resolved.

     

    Solved version = The issue has been resolved in the indicated release version.

     

    Closed = Feedback or opinion better posted on our forum for discussion. Also for reports we cannot reproduce or need more information. In this case just add a comment and we will review it again.

     

    Retest = Please retest in latest release.

    Priority Definitions

     

    Minor = Something not working correctly.

     

    Urgent = Server crash, data loss, or other showstopper.

     

    Annoyance = Doesn't affect functionality but should be fixed.

     

    Other = Announcement or other non-issue.