All Activity

The weird thing is it doesn't seem accurate. It reads slightly higher than what it actually seems to be.

Thank you itimpi for your help I found 2 files in the lost+found... but they are in a unknown format... What should I do with them? can they be restored?

Sorry but I don't see a Nvidia GPU on your PCIe bus. Are you sure the card isn't defective. Please try to reseat the card and make sure that it plugged in properly if it needs auxiliary power.

trying to download diagnostic also lead to 404 ngix page...

Ich habe halt nur ein Xiaomi (Android Phone) und ich finde es doch sehr umständlich jede einzelne Seite zu fotografieren. Daher ein Hardwarescanner. Ansonsten nutze ich gelegentlich schon AdobeScan für den Zweck, allerdings ohne Sync mit Unraid. Das könnte ich aber mit FolderSync bewerkstelligen.

Hello! I have a question about ATM9. Yesterday, I noticed that there’s an update to version 0.2.57, so I went ahead and updated it. And stopped working... 😞 I believe it is related to the Forge version, according to the attached latest.log. latest.log [25Apr2024 11:20:19.486] [Forge Version Check/INFO] [net.minecraftforge.fml.VersionChecker/]: [forge] Found status: OUTDATED Current: 47.2.20 Target: 47.2.30 Thank you for any advice that could help resolve this issue. 😊

The instructions to get to the FTP including hostname, username, and password, would need to be on the USB for that to work. So anyone who has your USB can also go do those things, unless there are firewalls in the way of the FTP Depending on who you are worried about, where that FTP is, how it itself is protected, that again may reduce effective security to zero.

okay so i get to flash backup tool and that give me a 404 error... cant start arracy

Ich denke, Du gehst davon aus, das ein Hardware-Scanner bessere Ergebnisse liefert. Aber falls Du iOS (Apple) nutzt, kann ich Dir wärmstens folgende App empfehlen: https://quickscanapp.com Wirklich überzeugende Ergebnisse und mit direktem Paperless-ngx-Support.

Hi zusammen, gibt es einen zuverlässigen und wirklich brauchbaren Netzwerkdokumentenscanner für um die 300 €? Ich möchte gerne direkt meine erhaltenen Papierschreiben in diesen Scanner einlegen und er soll alles auf Unraid in einem vorher definierten Ordner ablegen. Daraus würde ich dann die erstellten PDF´s entnehmen und Paperless-ngx (Docker) zuführen um die Dokumente zu verwalten. Kann mir einer von Euch einen guten Scanner für Dokumente empfehlen der eine vernünftige Auflösung bietet für eine gute OCR Erkennung und zeitgleich noch Netzwerkfähig (von mir aus auch gerne WLAN) ist um auf dem Heimserver zu speichern? Danke Euch. Gruß Infosucher

It is always easy to recreate the docker.img file if it gets corrupted and restore containers with settings intact via Apps->Previous Apps so, as long as the underlying XFS file system look OK, I would probably recommend doing that.

Likely a single location was corrupted, but now since it can't be repaired it keeps reporting errors everytime it's accessed... Sorry, make that a check filesystem on the cache then.

No i dont have a back up i just got out of treatment for the last year and my stuff is barely around.. so now pay 300 for a new key again ive done this before 2 other times. I'm really suppose to have no life events come up that could cause my back to go bye bye then im crap out of luck? Why did this just happen... like i change nothing no update to upraid nothing. cant post dagonistic cause it goes form letting me use the webgui then not.

If you restart in normal mode then the drive should mount OK. Look for a lost+found folder where the repair process will put any files/folders it found for which it could not find the directory entry giving the correct name.

As long as you have the original drives intact after the rebuild then you can always check the data integrity at a later date.

You do not mention if the arrays have parity protection? If they do then you would have to use the New Config tool to add the drive and then rebuild parity. As far as I know there should be no ZFS compatibility issues. I believe you could also add it as a single-drive pool directly. I have not actually tried this myself so if you go that route would like confirmation I am right.

Hi everyone. I'm having a similar issue with the error: I've got a Tesla P4... and Oddly enough it was working fine.. But it was getting really hot and I saw this error...... So i took it out, got a fan adapter for it that i'm powering w/a different power supply, and I still have this SMI issue. I've attached diagnostics, but I hope it doesn't suggest there is an issue with the actual card. I've reinsalled the driver, I'm moved the card to a different PCIE and still not able to get passed this error. Any thoughts or suggestions would be greatly appreciated. odyssey-diagnostics-20240425-1029.zip

Ah, thanks, I'm always extra careful with these things and I usually do extra steps to ensure everything is ok. Since I was replacing three "big" drives this time and doing a parity check after each replacement would mean an extra day "lost" and there was (apparently) nothing wrong with the parity or data rebuilds, I thought I would be safe enough with a final parity check after all drives had been swapped and rebuilt. My fault then 😔 I will take note of your suggestion and from now on I will play on the even safer side doing extra checks after each important step. Maybe it would be nice to add some kind of warning after a rebuild is done to let the user know that a non-correcting parity check is recommended? is at 54% right now with 521794 sync errors corrected. Once it ends I will test the rebuilt data drives' contents against my checksum files to verify if all files match and I will let you know the result. If checksums match, I will do a non-correcting parity check that will hopefully return zero errors. If there's a problem with the file checksums I will also come back running to ask for more advice (although I'm assuming it should be "plug the old data drive and copy the good files over"). I said it once before and I will say it again: that's one of the beauties of Unraid, if something goes wrong you can always go to each individual drive and try to recover as many data as possible. It's even possible and easy to go back to a previous state by just re-adding an old drive to the array (if the rebuild was done in maintenance mode and you are sure that nothing was changed on the array).

I ran it again without the -n and is the result: What should I do next?

My bad peach-diagnostics-20240425-1629.zip

好的，非常感谢！

It's a good idea to do a non-correcting parity check after doing a disk rebuild. Rebuilds don't "check their work" by reading what was written to the rebuilt drive, it's assumed if a write completes without error, it wrote correctly.

These are the diagnostics from the rebuild of the second data drive (after rebuilding parity drive and one data drive without errors). Old disk was: WDC_WD120EDAZ-11F3RA0_8CKXAD2F Replacement disk was: WDC_WD200EDGZ-11B9PA0_2HG0PK2N (sdf) While the rebuild was done I precleared the first old drive, WDC_WD120EDAZ-11F3RA0_5PG9BXWC (sdg). I will post the diagnostics again when the Parity-Check task ends. I did made a checksum of the contents of both data drives I planned on replacing, I think I will check them once the Parity-Check ends to be sure that all files (the rebuilt data) is correct. I already checked he first 20TB I had replaced (with no mismatch in checksums, that's why I precleared the old 12TB drive) so I will do the second 20TB disk next. The good thing is I still have the second 12TB drive untouched so if there is any mismatch I should be able to recover the original files from it. boxy-diagnostics-20240424-1231.zip

I just transfer from Synology and there is a feature on the NAS that aloud me to right click on a folder or files and generate a link for someone else to be able to download that particular folder / files. How can I do that with UNRAID? thanks

Good day all. I converted several ESXi VM's using Starwind V2V Converter. The conversions themselves completed without a hitch. I chose to convert using the .qcow2 format. I used one of the converted Ubuntu server 22.04 VM's to create a new UR VM. It will boot into the VM just fine but gets stuck at the network line and then will complete the bootup process. This is a clear sign that I will not have an assigned IP hence no internet or network access. I use the same VM network setup as I always have: br0 / rtl8139 in my case. I have tried all network combinations to no avail. Note: the actual ESXi VM used a static IP at the time of its creation. Your time and assistance will be greatly appreciated. Peter