Leaderboard

@Squid Fingers crossed he doesn't delete the thread to destroy the evidence.....

What exactly are you trying to login to? If you're trying to login to Plex you would login using the account you have at Plex.

Community Applications (aka CA) This thread is rather long, and it is NOT necessary to read it in order to utilize Community Applications (CA) Just install the plugin, go to the apps tab and enjoy the freedom. If you find an issue with CA, then don't bother searching for answers in this thread as all issues (when they have surfaced) are fixed generally the same day that they are found... (But at least read the preceding post or two on the last page of the thread) Simple interface and easy to use, you will be able to find and install any of the unRaid docker or plugin applications, and also optionally gain access to the entire library of applications available on dockerHub (~1.8 million) INSTALLATION Under 6.10.x+ to install CA, just go to the already existing Apps Tab in the Unraid UI and you'll be prompted to automatically install it. For older versions of Unraid, paste the following URL into the Plugins / Install Plugin section: https://raw.githubusercontent.com/Squidly271/community.applications/master/plugins/community.applications.plg After installation, a new tab called "Apps" will appear on your unRaid webGUI. To see what the various icons do, simply press Help or the (?) on unRaid's Tab Bar. Note All screenshots in this post are subject to change as Community Applications continues to evolve Easily search or browse applications Get full details on the application Easily reinstall previously installed applications Find out about your favourite authors And much, much more Multi-Language Installations When running on a supported version of Unraid that supports Multi-Language (6.9.0+), CA is the recommended way to install any of the Language Packs available. See this post for more detail Note that CA is always (and always will be) compatible with the latest Stable version of unRaid, and the Latest/Next version of unRaid. Intermediate versions of various Release Candidates may or may not be compatible (though they usually are - But, if you have made the decision to run unRaid Next, then you should also ensure that all plugins and unRaid itself (not just CA) are always up to date). Additionally, every attempt is made to keep CA compatible with older versions of unRaid. As of this writing, CA is compatible with all versions of unRaid from 6.12.0 onward. Require a proxy? See this post for CA to operate through a proxy Cookie Note: CA utilizes cookies in its regular operation. Some features of CA may not be available if cookies are not enabled in your browser. No personally identifiable information is ever collected, no cookies related to any software or media stored on your server are ever collected, and none of the cookies are ever transmitted anywhere. Cookies related to the "Look & Feel" of Community Applications will expire after a year. Any other cookies related to the operation of CA are automatically deleted after they are used. Multi-language Note: When running on a version of unRaid that supports multi-language, CA will operate in the language of your choice. However, translations of the descriptions of the applications themselves are outside the scope of the translations, and will always appear in whatever the author themselves has dictated (ie: English) Additionally, CA supports translations on the spotlighted apps "Reason". Translations can be submitted against https://github.com/Squidly271/Community-Applications-Moderators/blob/master/Recommended.json if you wish to contribute Contribute towards development (or simply buy me a beer) Credits Development Andrew Zawadzki Additional Contributions bonienl, eschultz GUI Layout Design Mex Application Feed Andrew Zawadzki, Kode, Limetech Additional Testing CHBMB, SpaceInvaderOne, Sparklyballs, wgstarks, DJoss, Zer0Nin3r, Mex, prostuff1, bonienl, ljm42, kizer, trurl, Jos, Limetech, SimonF, ich777, jimmy898, Alex.b, neruve, Eugeni_CAT, ChaseCares, TheEyeTGuy Moderation dockerPolice, pluginCop Additional Libraries Awesomeplete (Lea Verou), Chart.js (Various), XML2Array, Array2XML (Miles Johnson), chartjs-plugin-trendline (Marcus Alsterfjord), Magnific-Popup (Dmitry Semenov) Copyright © 2015-2023 Andrew Zawadzki For the details regarding the various policies that Community Applications has regarding applications, see here

Hi guys, this is a simple plugin that allows users to clear their disks before add them to the array. The main characteristics of this plugin are: Modularity: can be used standalone or in conjunction with Joe L. or bjp999 scripts; Ease of use: with a few clicks you can start a clear session on your disk; Integration: you can always access the plugin under Tools > Preclear Disk menu. If you have Unassigned Devices installed, you can start/stop/view preclear sessions directly from Main > Unassigned Devices. All dependencies included: you don't need SCREEN to run a preclear session in the background; all jobs are executed in the background by default, so you can close your browser while the preclear runs. You can install it directly or via Community Apps. Q & A: Q) Why Joe L. or bjp999 scripts are not included? A) I'm not authorized by Joe L. to redistribute his script, so you need to download a copy from the topic above and put it under /boot/config/plugins/preclear.disk/ renaming it to preclear_disk.sh if necessary. bjp999 modifications are unofficial, so I decided not to include it by default. A) the bjp999 script is now included by default. Q) By default, I see a "gfjardim" script always available. Why? A) Since I'm not authorized to redistribute Joe L. script and the recent slow support by the author, I decided a major code rewrite in the script was needed. The new script is being actively supported, compatible with unRAID notifications, is faster than bjp999 script and has a cleaner output so users can easily visualizes what's going on with their disks. Q) I want to use one of the older scripts(Joe L. or bjp999) in conjunction with notifications. Is that possible? A) Yes. I've made some adjustments on both scripts so they become compatible with unRAID notifications; Joe L. version can be found here and bjp999 can be found here. A) the bjp999 script is now included by default; it includes support for Unraid notifications. Q) Is there any howtos available? A) gridrunner made a awesome video explaining why preclearig a hard disk is a good idea, and how you can accomplish that: Q) The plugin asked me to send some statistics information. How does the statistics report system work? Is it safe? Is it anonymous? A) To better track the usage of the plugin, a statistics report system was put in place. The main goals I intend to archive are: know number of disks that gets precleared; fix any silent bugs that gets reported on the logs; know average size of disks, their model, their average speed and elapsed time we should expect from that model; success rate; rate of disks with SMART problems; This system is totally optional and users will get prompted if they want to send each report. It is also safe and totally anonymous, since all data is sent to Google Forms and no identifying data is exported, like disks serial numbers. Detailed info can be found here. The statistics are public and can be found here. Q) How can I download a copy of the plugin log? A) Please go to Tools, then Pleclear Disk, and click on the Download icon: Q) Which are the differences between Erase and Clear? A) The Clear option uses zeroes to fill the drive; at the end, the drive can be added to the array the array immediately. The Erase All the Disk option uses random data to wipe out the drive; the resulting drive can't be quickly added to the array. If you want to add if after erase, you must select Erase and Clear the Disk. Troubleshooting: Q) After Zeroing the disk, the Post-Read operation fails saying my drive isn't zeroed. A) When zeroing the disk, the script uses a zero filled data stream produced by the pseudo-device /dev/zero. If a Post-Read fails just after a Zeroing operation, chances are that you have bad RAM memory, or less frequently bad PSU, bad cables or bad SAS/SATA card. Please run some rounds of MEMTEST on your machine to test your RAM modules. Q) A Pre-Read operation failed and I see Pending Sectors on the SMART report. A) Pending Sectors will lead to read errors, and the Pre-Read operation will fail. To force the hard drive firmware to remap those sectors, you have to run a Preclear session with the Skip Pre-Read option checked. Q) I've lost communication with the webgui, can I manage preclear sessions from the terminal? A) Yes, you can. If you lost communication with the webgui or want to use the command line interface to manage your preclear sessions, you just need to type preclear on your terminal to start/stop or observe a preclear session.

Using 6.1 rc-2 Intermittently I'm getting this message logged: Aug 3 17:10:14 Server_A kernel: unregister_netdevice: waiting for lo to become free. Usage count = 1 Now, I don't particularily care about the message, but what's annoying me is that if I have a SSH session open to the server (and I almost always do) is that it's also showing up there. Very annoying if I'm in the middle of something with nano, and the message pops up in the middle of my edits. Never noticed anything of the sort happening pre rc-2

Upgrade Instructions Clicking 'Check for Updates' on the Plugins page is the preferred way to upgrade. If the new version does not appear, you can manually update by selecting the Install Plugin tab, paste this URL and click Install: https://raw.githubusercontent.com/limetech/unRAIDServer/master/unRAIDServer.plg Alternately the release may be Downloaded. In this case it is usually only necessary to copy all the bz* files from the compressed folder to the root of your USB flash boot device. Please also read the unRAID OS version 6 Upgrade Notes for answers to common issues that may arise following upgrade. Changes This is a bug fix and security update release. Base distro: reiserfsprogs: version 3.6.24 (downgrade to address reiserfsck regression) samba: version 4.5.7 (CVE-2017-2619) Linux kernel: version 4.9.19 added CONFIG_BLK_DEV_PCIESSD_MTIP32XX: Block Device Driver for Micron PCIe SSDs (user request) Management: emhttp: get rid of SO_LINGER on connection socket emhttp: override array autostart if safe boot mode emhttp: silence "Transport endpoint is not connected" messages emhttp: btrfs cache pool set to raid1 only on new pool creation syslinux: include "unRAID OS GUI Safe Mode (no plugins)" boot option update hwdata/{pci.ids,usb.ids,oui.txt,manuf.txt} update_cron: generate system cron table only from installed plugins webGui: Ignore mover log entries in color coding webGui: Fixed wrong reference to Display Settings in Main page webGui: Fixed: missing creating of eth10 settings page webGui: Add in links to dashboard webGui: SweetAlert bugfixes webGui: Add tooltipster to dynamix and add a tooltip in DiskIO toggle at /Main webGui: Fixed DNS server assignment when changing VLANs webGui: Fixed DNS server assignment follows IP address assignment webGui: Fixed incorrect display of BTRFS check for non-btrfs disks. Removed unused buttons. webGui: Fixed missing csrf token and code optimizations in SMART report generation webGui: Cleanup unused parameters when saving configuration files webGui: Disk read/write IO in background daemon webGui: Remove the old temp .plg file on remove webGui: Remove href bookmarks on anchor elements webGui: Provide control to initiate btrfs balance on btrfs-formatted array devices and single cache device. webGui: Remove preset btrfs balance options; btrfs-raid1 is default only for initial creation of multi-device pool. webGui: DeviceInfo shows all check/balance/scrub operations but greyed out depending on arry started state webGui: Add lscpu output to diagnositics webGui: toggling acs override will now apply to all boot options in syslinux.cfg

Seagate 8TB Expansion STEB8000100 I just paid $199 from B&H and it's pre-clearing as I type (and as I go through my day, then sleep, then enjoy my Saturday and then... sorry, i digress) but this is obviously even better.

Or go to Tools - Diagnostics and post complete diagnostic zip and maybe we can tell you more about what the problem is. I will probably split this part of the thread soon since it is unlikely to have anything to do with the release.

There's links to the github and docker site in the first post which has an extensive readme. Why don't you ask them to describe how theirs is different to ours? I prefer that option. Ultimately they all download the same binary.

Hope it helps, and although only a few SASLP/SAS2LP users have those issues, it's a fairly common problem.

This is from my Plex docker, you'll notice I am using corresponding cores/threads from this. This may not be the 'right' or 'recommended way' but its what I am doing and seems to work ok for me.

Probably best to get specific advice rather than relying on google search results, unless you are confident in your ability to decide which search results are appropriate.

Its seemingly an issue, but it really isn't. If the flash dies, make a new trial usb. Boot it up. And assign the disks At that point, all of your shares are now accessible. Copy the backup from the array to the new flash. Reboot and and your back in business like nothing happened. Or, as @wgstarks said, set the backup destination for USB to something else accessible. (A UD assigned disk, a UD mounted SMB share on a different computer, etc)

Use -L, usually there's no data loss.

Could you please paste the output of this command? tree /mnt -L 2

Just quoting myself - just got it up and running.. first, you can add Collabora docker from CA Applications with docker-hub search enabled. then just follow this instructions to see which ports/setting you need to add: https://www.collaboraoffice.com/code/ for me it works only on with separate sub-domains for Nextcloud and Collabora. e.g. at first i installed NextCloud at for example mydomain.com/nextcloud, and tried install collabora with similar sheme with no luck. then i moved Nextcloud to nextcloud.mydomain.com and Collabora to office.mydomain.com. You need to activate Nextcloud Collabora application and point to Collabora URL to bind them together. And then everything looks like working as expected.

Not sure if that's what you intend to do but be aware that a disk formatted with the UD plugin can't be used as an array disk after a new config, it will appear as unmountable.

It's finished, just waiting for the other ls.io members to proof read it.

There are known problems with reiserfsck 3.6.25, upgrade to unRAID v6.3.3 and run it again, although in this case it may have similar results.

Open the GUI and click on the shares tab. In the user share section there should be a disk3 share. Click on the corresponding "compute" link on the size column. It will take a few seconds, and should return a list of physical disks that the share resides on. Once you get that information, open mc and navigate the left panel to the /mnt/diskX that corresponds to the physical disk shown by the compute command so that the contents of the disk3 folder shows, and navigate the right panel to the same spot, but only to where only the disk3 folder itself is shown. Using the tab key, the arrow keys and the insert key, highlight the contents of the disk3 folder in the left panel, and press F6 to move the highlighted folders to /mnt/diskX in the right. After this is complete, you should be able to go back to the web GUI, click on the disk3 share in the user share list, and delete it on the share properties page.

currently on 6.2.4, its only showing 6.3.2 as the latest update (even after telling it to update plugins) using the manual plugin update method as noted in the first post.. installing 6.3.3 now... noticed after it booted (havent started array) I see a group of log entries every 30 secs of the inventory list (list of the hd found + key info + slot info)... this results in about 60? lines each time... this could easily add up to a lot of noise if a user left their server idling.. wonder if its because the webui is open causing it? started the array and it stopped. so far nothing blew up going from 6.2.4->6.3.3.

Just run the command @bonienl wrote out but run it within the user scripts plugin at array start.

Its basicallyexactly what bonienl stated #description=Add to hosts file echo "192.168.111.10 hostname.mydomain.com" >> /etc/hosts placed on the flash drive called script within /config/plugins/user.scripts/scripts/someFolderName and set to run at array start See

Ok finished the guide. Was a bit rushed so sorry if its a bit lower quality than normal.

The shows in question were probably copied originally via Sonarr / Sickbeard / SickRage, and is a common issue with them. In those app's UI's, you need to set the permissions to set for new files to be 0777. To fix the already existing files, install Fix Common Problems, then Tools - Docker Safe New Permissions

You need to check disk filesystem on disk 4 https://lime-technology.com/wiki/index.php/Check_Disk_Filesystems

I'm not sure if you fully understand. I was suggesting you do a new install and copy your whole config from backup, not just super.dat. The part about super.dat was just a warning about some issues people have from restoring that specific file.

Good news! I've found the **FREE!** bonus Sempron 140, and confirmed the ram is indeed G.Skill. Some pics attached as well:

I'm using 6.1.1 and I also have it. Showed up on my console and not too sure why.

Using 6.1-rc3 and its also happening intermitently to me as well.