Leaderboard

Popular Content

Showing content with the highest reputation on 09/05/18 in Posts

  1. Support for FileBot docker container Application Name: FileBot Application Site: http://www.filebot.net/ Docker Hub: https://hub.docker.com/r/jlesage/filebot/ Github: https://github.com/jlesage/docker-filebot This container is based on Alpine Linux (meaning that its size is very small), has a very nice, mobile-friendly web UI to access FileBot's graphical interface and is actively supported! Make sure to look at the complete documentation, available on Github ! Post any questions or issues relating to this docker in this thread.
    1 point
  2. set the spin down delay to 'never' in settings/disk settings If you turn on TW you'll get the full speed benefit. If you want to be a bit more selective, have a look at the TW plugin that will turn TW on/off depending on how many drives are spun down e.g. I have 6 disks and I have TW on if 2 or less are spun down
    1 point
  3. Those speeds seem reasonable for writes to the parity array. You can turn on turbo write at the expense of having all disks spin.
    1 point
  4. See the FAQ, you have two different size cache devices, using default raid1 profile free space is incorrectly reported, usable space is equal to the smallest device, so you really are out of space despite what's reported by the GUI.
    1 point
  5. Another thing also. Warranties for the drive are not necessarily valid if they are not returned in the same originating country. IE: A drive which was purchased (by the reseller) in say China may (or may not) have a valid manufacturer's warranty at all if you attempt to RMA it in the US.
    1 point
  6. last i heard there was still issues around unpacking, i have seen a test release of nzbget has been released and there was a fair bit of detail around par and crc checking and such like in the next release, so possibly the next release will fix this up, we shall see.
    1 point
  7. As a software engineer, I very very much appreciate the dark theme.
    1 point
  8. @testdasi FYI, that's the same one I use on my TR board. I've updated to 6.6.0-rc1, and found that I still need this. it works! I don't need the modprobe line anymore, I was mistaken in my initial response.
    1 point
  9. Forum has been noticeably slower for me since the update, e.g. when I go back and forth to the unread post list it always takes two beats to display the page, first just shows some parts: Then after a second or two the rest appears: This is rather annoying when reading many posts, and it happens both at home and at work, with different computers and ISPs, so believe the problem is not on my side.
    1 point
  10. The old theme was pretty bad but the only thing I don't like really is that for UX designers like myself. White text on a black background is kind of seen as heresy in UX development. You're supposed to at least have a solution that is black text and white or somewhat kind of light background. So the fact that we only have a black option is kind of weird. I'm still getting used to it but it's still a better design than before.
    1 point
  11. Yes, what I did was for my Nextcloud docker was add my two external storage paths as additional mounts inside the docker by clicking on "Add another Path, Port, Variable, Label or Device": Then enter my details: Then once I had them entered, go back to External Storages app and added them there.
    1 point
  12. I've been going through withdrawal waiting for 6.6 to be released - When was the last time between CA releases ~6 weeks? 2018.09.01 Adjust CSS if unRaid is 6.6+ Many code optimizations Remove ability to switch number of results displayed (Computers / Tablets will now display 25 results. Cellphones will display 10 results) Fixed: Under certain circumstances, a blank category could appear in the popup display Autocomplete searches now include Categories in the list Remove any CPU pinning from a template present in the application feed unRaid 6.6+: Automatically blacklist applications if they violate the new security precautions present in docker on unRaid 6.6+ Remove Wide theme - Will ultimately be replaced with a color reversed theme Under much pressure from @bonienl, finally switch to 6.6's "spinner" Much, much more (You can always look at the commit history here: https://github.com/Squidly271/community.applications/commits/master)
    1 point
  13. I believe we are all talking about the oscar-snubbed, instant classic, Kevin Bacon film, "The Air Up There," starring Kevin Bacon as a college basketball coach who wants a big promotion. To get it, he needs to make a dramatic find. He ends up deep in Africa, hoping to recruit Saleh, a huge basketball prodigy Jimmy glimpsed in a home movie. But Saleh is the chief's son and has responsibilities at home, since the tribe's land is threatened by a mining company with its own hotshot basketball team. And I think we can all agree, there is no problem with the air up there, or on any of the sites/gui/web gui/whatever!
    1 point
  14. I still don't know what you are talking about. The marketing site at unraid.net, the forums, or the webgui? The marketing site is a responsive design site designed by some true pros. We are more than happy with it and I'm sure most newcomers will find the messaging a lot easier to understand. Not sure what there isn't to like about it, but like most designs, some will like it, some won't. We generally believe that more will like it than what we had before (otherwise we wouldn't have changed it). The forum theme is not any more "air" than what we had prior to moving to unraid.net. The webgui screenshot featured on the product page shows we are keeping the UI design predominantly the same with minor aesthetic changes to show some branding consistency. We do not intend on redesigning the UI to have "more air" like the marketing site. We and our designers know that what is desirable for a marketing site and a product UI aren't the same. Sent from my Nexus 6 using Tapatalk
    1 point
  15. Thanks, we put a lot of work into it and its only the beginning. We have a LOT more in store for everyone beyond just marketing work. This simply laid the foundation for bigger and better things to come.
    1 point
  16. I think it would be way more interesting to check why the limes servers results in 1000+ ms ssh negotiation times while the other servers manages about 100 ms. The linked data indicates that the bulk download starts when my download has finished and the complete final page is already displayed. Not so much reason to worry about the actual image download times, if some parts of the world have to wait a large amount of time before even being able to request the image downloads.
    1 point
  17. came here asking me the same but i figured it out. So in case anyone else is wondering how to do this: When you have the webinterface open press alt + ctrl + shift, this opens a sidebar where you can edit the clipboard. Paste your links there and jdownloader will find them.
    1 point
  18. Yeah, the easy way is to open a bash terminal into the docker and then check the ifconfig settings. If you see a connection to tun0, then you know you're connected to the VPN. Another way is to run this command from within the docker and check to see if the ip address is the same or different as your ISP provided IP address. curl ipecho.net/plain ; echo
    1 point