Leaderboard

Summary: Support Thread for ich777 Gameserver Dockers (CounterStrike: Source & ConterStrike: GO, TeamFortress 2, ArmA III,... - complete list in the second post) Application: SteamCMD DockerHub: https://hub.docker.com/r/ich777/steamcmd All dockers are easy to set up and are highly customizable, all dockers are tested with the standard configuration (port forwarding,...) if the are reachable and show up in the server list form the "outside". The default password for the gameservers if enabled is: Docker It there is a admin password the default password is: adminDocker Please read the discription of each docker and the variables that you install (some dockers need special variables to run). The Steam Username and Password is only needed in templates where the two fields are marked as requirde with the red * Created a Steam Group: https://steamcommunity.com/groups/dockersforunraid If you like my work, please consider making a donation

Ok good to know. I will volunteer to be a test dummy for any game that I own and can help with and I only will request servers for what I do own. Re: Alloc's server script https://7dtd.illy.bz/wiki/Installation I have used this on my linux vm from A15 to A16.4, but had an issue and lost my vm so now I"m just running them on windows save for your docker. I'm rooted in the 7d community and if you need any questions answered I can help.

I just wanted to pop in this thread and thank you all for posting all your trial and error issues/solutions. I installed Sophos a few days ago after reading this thread, and after a little learning curve with setting up NAT and a few other settings I needed (from my pfsense install) I have a near perfectly running install (just have to setup Nat reflection, but not a big deal) Thanks!

Not sure exactly what I did wrong, but deleted and set it back up and it did put the files in the correct place this time. Don't care much about parity- I have scheduled backups that take care of data security. Nothing runs 24/7, just have 4 gaming computers used on demand.

Sorry but what do you mean 'put everything in the container'? Delete the container, then install it new and set the path's to where they should be (think /mnt/disk2/steamcmd - btw never write direct to a disk everytime to 'user' and then to a share, if you write direct to a disk the parity won't work!) <- read this. To check if everything is ok just turn on 'Advanced View' in the Docker page on the right upper corner.

I bought it from Amazon (US) but shipped from a different seller in Korea. Shipping was about $31 so I had to pay higher than MSRP. However, I did get the non Engineering Sample so I'm happy with it. 😃

I was having 429 Rate Limit Exceeded errors in my log. It was taking 20-30 seconds to access files. I found this thread on the RClone with other users having the same problem. The fix is to add the user-agent option to your mount script. I added this --user-agent "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/70.0.3538.77 Safari/537.36" which is the Chrome user-agent. This has fixed the problem for me. There are reports that you can choose any user agent you want and it will work.

Mods- Edit GameUserSettings.ini Under [ServerSettings] ActiveMods=517605531,519998112,496026322 Admins- you will need their steamid and then create a file: \ShooterGame\Saved\AllowedCheaterSteamIDs.txt and enter the ID of each of the admins you want to have admin rights.

Reboot Sent via telekinesis

I’m running 6.7. Don’t see any obvious problems with the plugin.

CA does not do docker compose. CA is basically just filling in the form of the Add Container page for you, and the Add/Edit Container page is just taking the inputs from that form to construct a docker run command.

Hey jowi. The nest app on "normal" wifi would not be able to communicate with the thermostat on another subnet by default. You could add firewall rules to allow the 2 clients to talk across subnets if you wanted that. But by default, pfsense does not allow traffic between different subnets. For what its worth, I recently went down a path similar to the one you seem to be headed towards. I wanted different subnets for IoT stuff, and for guests when they visit, and maybe for game consoles and set-top boxes to bypass my VPN, etc. It started to get kinda crazy with all the different NIC ports and wifi access points required. Also, using different wifi access points for different subnets would probably be messy, with the APs conflicting with each other if on the same band/channel. But keeping the APs on different bands/channels seemed like a pain... The solution I found was to use VLANs for different subnets, and an ubiquiti unifi switch + ubiquiti unifi AP for wifi. Using VLANs means less physical ports required for the NIC that pfsense uses. On the wifi side, the unifi AP can handle different wifi SSIDs for each VLAN, all in a single AP. For the switch, any old VLAN capable switch could work, but once committed to the unifi AP it made sense to use the unifi switch. In addition, both the unifi switch and unifi AP can be managed from a unifi controller, and that can be run as a docker on unraid. Hope that helps.

Le sigh..... Another OS update, another disappointment from lack of inclusion of a wanted feature in an already wonderful product....

I installed the openvpn-as docker container which allows me to do exactly this. It would be nice if it was baked in but the docker solution is an easy alternative.

Everything is now fixed and you can choose between a server with and without the caves, simply delete the whole docker and the folder in appdata and redownload (just wait for the APP to update in the Communtiy Applications if you see that the port is set to 10890 and a new variable 'Caves' is set to 'true' then you can download it).

There are known issues with Linux and Ryzen, most workarounds are discussed here.

You can plug your USB flash device into a PC and then make a backup (just drag contents to a temp folder on your desktop). Next use the USB Creator Tool to re-install Unraid OS on your flash. You can put the last version you were running, or try 6.7 again. Then copy the contents of your 'config' folder backup to the USB flash 'config' folder. If you had any custom 'syslinux' settings, you could restore that too. Eject flash, reboot server and 'should work' 👍

Where does one find the t processors? I see you have an 8700t and I’m interested in finding one.

The online auto backup of your config sounds like a winner, be interesting to see what you plan to charge. i bought a pro license upgrade from basic to support you guys, I’m no where near the limit for the mid tier yet, but think the software is great and has been working fantastic for me for the past 3 months since I switched from a synology NAS to unraid purely because I was about to hit an expansion point on the synology. are there things that could be done easier in the GUI? Yes, I think there’s work for passing from pci devices that would greatly simplify things for users and I can’t for the life of me get VNC to work in the recommended mode. overall very happy customer.

Limetech should do more of that kind of thing. There is so much information. It would be awesome if there was regular content discussed on there. I think that having community projects for dockers/vm's discussed, going over plugins, talking about best practices, hardware, and so on would be really cool. There are a lot of fun people in the community, so if you get a few of them together on a stream with some ice cold beer I'm sure it would be entertaining.

Thanks for that. Just in case someone else has this issue and to expand upon what @dmacias said. I had to go into Nerdtools and set it to download and install the pip package. Once that was done everything worked again. Thank you!

This thread is reserved for guides and videos for unRAID. Please do not ask for support here, such requests and anything off-topic will be deleted or moved. Note: work in progress, incomplete, more to add, and the order of listing can be improved Note: periodically recheck the Spaceinvader One YouTube for any new videos Note: many videos aren't visible in the linked post if using https, must use http Note: any linked posts with embedded videos will be slow to load, allow your browser extra time! Their pages may also jump around some as they load. The unRAID community owes the authors below a huge debt of gratitude for the outstanding work here, especially to gridrunner! Please consider dropping them a note of appreciation, or more if they have a donation link! Guides and Videos for General unRAID Usage Getting Started Introducing unRAID OS 6 - Limetech video by jonp, intro to unRAID All about the Array, how data is written and how parity works in unRAID - an introductory video guide by gridrunner Getting Started with unRAID - Limetech guide, with videos, text, and screen shots Installing unRAID from Windows - Limetech video by jonp Installing unRAID from Mac OS X - Limetech video by jonp Configuring your BIOS settings - Limetech video by jonp Initial Setup - Limetech video by jonp Configuring Disk and User Shares - Limetech video by jonp Updating the unRAID OS Software - Limetech video by jonp Getting Started with unRAID - Limetech wiki How to install and configure some essential plugins for unRAID - video guide by gridrunner How to create custom unRAID banners and change the look of the webGUI - video guide by gridrunner General How to add a cache drive, replace a cache drive, and create a cache pool - video guide by gridrunner How and why to preclear your drives - video guide by gridrunner How to replace or upgrade a drive in your array - video guide by gridrunner How to setup and use rclone. Copy, sync, and encrypt files to the cloud. Even stream media - video guide by gridrunner NEW Troubleshooting Need help? Read me first! - PLEASE start here first! Troubleshooting - more troubleshooting help, with sections for older versions too Guides and Videos for Dockers in unRAID Getting Started All about Docker in unRAID - Docker Principles and Setup - video guide by gridrunner Using Dockers - Lime Technology Manual by jonp Get started with Docker - introductory guide by docker.com Docker Guide - older Limetech guide - but use Community Applications! Noobie docker setup guide - older guide by xxredxpandaxx, a little out-of-date General Docker Information The Complete unRAID Reverse Proxy, Duck DNS (dynamic DNS) and LetsEncrypt guide - guide by Fma965 Applications Plex: Guide to Moving Transcoding to RAM - guide by jonp How to install binhex's Deluge-vpn (bitTorrent docker with VPN) - video guide by gridrunner How to install/configure OpenVPN-AS for secure remote connections - video guide by gridrunner Hamachi Install using Community Apps (with template editing) - video guide by CHBMB, "Note: make sure you set highest resolution" How to install and configure a SABnzbd Docker container - video guide by gridrunner How to install SABnzbd and Sick Beard on unRAID with auto process scripts - guide by gridrunner How to install and configure a SickRage Docker container - video guide by gridrunner Setting up an ownCloud Docker on unRAID - video guide by xxredxpandaxx Guides and Videos for VM's in unRAID Getting Started An introduction to VM's, including BIOS settings and iommu groups - video guide by gridrunner A brief synopsis of virtualization terms and acronyms - basic introduction by jonp, "Note: old, may need updating" Enabling VM Management - Limetech video by jonp UnRAID 6/VM Management - Lime Technology Manual by jonp, "Note: Limetech guide to VM management" UnRAID 6/VM Guest Support - Lime Technology Manual by jonp, "Note: full Limetech guide to VM setup in unRAID; special section for OpenElec" General VM Information How to connect virt-manager to unRAID to help manage your VMs - video guide by gridrunner, "Note: read the thread" How to pass through an NVIDIA GPU as primary or only GPU in unRAID - video guide by gridrunner How to pass through hard drives, convert disks, and test Vdisk performance in unRAID VM's - video guide by gridrunner How to easily and safely pass through a USB controller - video guide by gridrunner, "Note: adds hotswapping to your VM's" Passthrough Entire PCI USB Controller - guide by archedraft How can I pass through a physical Network controller to a VM? - video guide by gridrunner Passing Through Network Controllers to unRAID 6 Virtual Machines - guide by jonp, "Note: may be old and obsolete?" Physical to Virtual Machine Conversion - Lime Technology Manual by jonp, "Note: Limetech guide to converting an existing OS to a VM" Performance Improvements in VMs by adjusting CPU pinning and assignment - guide by dlandon How to both manually and automatically backup your unRAID VMs - video guide by gridrunner How to install unRAID as a VM on another unRAID server - video guide by gridrunner Custom VM icons automatically downloaded and installed to unRAID - guide by gridrunner, "Note: scripts for downloading icons and banners for unRAID" Problems and solutions - installing nested VMs in KVM on unRAID - video guide by gridrunner How to remotely start, connect to, and even play a game, on a VM over the Internet - video guide by gridrunner How to passthrough and boot from an NVMe controller for bare metal performance in unRAID - video guide by gridrunner NEW How to easily pass through an Nvidia GPU as primary without dumping your own vbios! - video guide by gridrunner NEW Windows VM's Installing a Windows 10 VM on unRAID - Limetech video by jonp Windows 7 Media Center VM with Ceton Network Tuner to serve WMC Extenders - guide by dlandon Streaming Windows Virtual Desktops - Limetech video by jonp (VNC vs RDP) How to Convert a pre-built Windows VM from VMWare to unRAID KVM - Limetech video by jonp Mac VM's The newest, easiest and best way to install OS Sierra or El Capitan! - video guide by gridrunner Mac OSX 10.11 or 10.12 Sierra (seabios and OVMF/clover methods) - video guide by gridrunner Mac OS X 10.11 El Capitan – VM on unRAID - guide by archedraft How to upgrade your VM to OSX 10.12.4 - video guide by gridrunner NEW How to read the OSK key on an Apple - video guide by gridrunner Advanced OSX VM techniques in unRAID. Get everything working! - video guide by gridrunner Applications Gaming on a NAS? You better believe it! - Limetech Managing Game Libraries with User Shares - Limetech video by jonp How to install OpenELEC (Official) in a VM - video guide by johnodon How to install Lakka for the best retro gaming experience as VM - video guide by gridrunner Running "Tech and Me" ownCloud VM appliance on KVM on unRAID - guide by Pducharme Running a Raspberry PI as a VM on unRAID using Linux QEMU - video guide by gridrunner Install a custom LibreElec VM complete with Emulation Station - video guide by gridrunner Virtual Reality Passthrough VIVE & Oculus, 4 Gamers 1 CPU with NVIDIA Cards - guide by Baltostar, "Note: read the thread" Demonstrations 2 Gaming Rigs, 1 Tower - Virtualized Gaming Build Log - Limetech video, "unRAID Featured On LinusTechTips" 7 Gamers in 1 Tower – Behind the Scenes - with videos, Limetech and LinusTechTips 10gbps over SMB on a 45Drives Storinator - with video, Limetech and LinusTechTips 3 Gamers, 1 mATX Motherboard, 1 CPU and some benchmarks - video by gridrunner OS X on unRAID running on a MacBook pro! - video by gridrunner Physical vs. Virtual Machine - 3D Mark Benchmark Comparison - Limetech video unRAID Server OS 6.1 Overview - Limetech video by jonp unRAID Manuals unRAID Official Documentation - Limetech wiki, current unRAID manual UnRAID Manual for v6 - v6.0 unRAID manual Unofficial UnRAID Manual - the v4 manual plus user enhancements; includes the illustrated sections on share settings and 'split level' UnRAID Manual for v4 - very old! only for v4.7 or earlier unRAID FAQ's FAQ for unRAID v6 on the forums, general NAS questions, not for Dockers or VM's FAQ for unRAID v6 on the unRAID wiki - it has a tremendous amount of information, questions and answers about unRAID. It's being updated for v6, but much is still only for v4 and v5. Docker FAQ - concerning all things Docker, their setup, operation, management, and troubleshooting FAQ for binhex Docker containers - some of the questions and answers are of general interest, not just for binhex containers VM FAQ - a FAQ for VM's and all virtualization issues FAQ for unRAID v4 and v5 - old! not for v6 - add miscellaneous (Turbo Write? Tips and Tweaks? old build guides? Reiser-to-XFS conversion? maintenance guides?) - note: don't know where this all belongs - wiki page, stickied post in ?? board, somewhere else??