Leaderboard

Hey guys, here's an updated boinc docker image: https://hub.docker.com/r/linuxserver/boinc It's brand spanking new, based on ubuntu bionic. Contains both the boinc client and manager, so no need to install anything on another machine. It's not suitable for an in-place upgrade from my old rdp-boinc image, but setting it up from scratch takes only a minute or two. This one works with intel and nvidia (with the nvidia plugin) gpus (as long as the project supports it). There will be a template and a support thread soon, but until then, you can just create it with the vars from the dockerhub description.

There is unlikely to be a cure. COVID-19 is caused by a virus so focus would be on vaccine and treatment (to alleviate symptoms). And then we have the side burden of dealing with anti-vaxxers and idiots but the no amount of Rosetta@home can help with that.

Update: We're up over 1,200+ Unraid users across the BOINC and Folding@home Unraid teams. Wow- thank you all. 🙏 http://boinc.bakerlab.org/rosetta/team_display.php?teamid=18943 https://folding.extremeoverclocking.com/team_summary.php?s=&t=227802

Either don't set it to 100%, or make it run on all cores except for the 0. Unraid has a tendency to be unresponsive when other tasks push all cores to 100%

I'm locking this topic until I can fully read and make sure I understand all the concerns here...

Just thought I would post a shot of the statistics for world-wide downloads on the official boinc container available within CA. While the stats are only valid as of March 8th, I would expect another HUGE jump in downloads the next time CA gathers statistics (~April 8th). Kudos to everyone. Every little bit helps. You can make a difference. More work units will become available.

I've loved the message, but frankly the vehicle was not appropriated. IMHO if some functionality is part of the plugin scope, that's ok just allow users to opt-out. If it isn't part of the scope, it should be an opt-in functionality. I got many criticism (@Squid included) about the statistics system in Preclear Plugin because it was in the beginning an opt-out system, and they were right. Since it was out of the scope of the plugin, I've added it as a separated plugin. Squid should do the same, an opt-in system to messages unrelated to Community Applications scope.

Look again, we just broke into top 1%.

Not off the top of my head. I don't remember, I let the internet remember for me.

Here it is, wip. https://github.com/linuxserver/docker-boinc/tree/initial Currently pushed to lsiodev/boinc Tested with nvidia, it works (seti@home). I didn't have enough time to test igpu

My statement about 800+ being OK with the notification was in response to this statement by another of the opponents: "think many more are gonna agree with my position then with yours, As clearly seen just a few post above." If he can argue that 3-4 people objecting to the notification in the forums is evidence that "many more" people agree with his position and support it, then I can argue that the 800+ people participating in the COVID groups BECAUSE OF the notification is also evidence that they likely were OK with the notification (as some have stated). No one participating seemed to have chimed in and said "Hey, I am doing the COVID thing, but, I really hated that you told me about it." In both of my prior posts on the subject I clearly stated that I respected the right of anyone to have a differing opinion and that I realized that my agreement and your disagreement was a likely outcome of something like implementing a notification system with various uses. You (and others) expressed your disagreement with how it was done. I merely raised my voice and said I was OK with it. Apparently, my opinion is not as valid as yours. The idea that @Squid or someone else is going to get a hold of this notification system and start injecting religious and political messages into the UI is also far-fetched. Squids are agnostic and apolitical. I have been in these forums for 10 years and one of the things I like best about this community is that the discussions stay on point and don't stray off into controversial or polarizing topics. Everyone seems to respect that and is self-policing. Perhaps COVID is polarizing and political to some? I don't see it that way, so I was OK with it. Someone else was upset that It was it was "his server and his property so no one had the right to display anything there." If this had actually affected the server hardware (like taking it over for bitcoin mining), I would be in 100% agreement. This notification was in the UI of the OS. Limetech owns and licenses the OS. They do have the right to do what they want in their software and were apparently OK with the notification. Perhaps they will rethink that. Again, you are welcome to your opinion, but, I am equally entitled to have my own. Why is saying I was OK with the notifications system and the COVID message any different that you saying you were not?

You can set it up on their website: https://boinc.bakerlab.org/rosetta/home.php How much disk space is everyone devoting to this? I just set a 10 GB cap for now. Anyone just go with the default settings? How's that working for you? Also, anyone find that the BIONC manager lags on macOS? Stuck on this screen a lot: It also appears you can do all of your configuration from the website after you logged into your BIONC account in the manager software and synced it with the docker client. Also, happy to report that I'm up and running! Thanks @Squid for bringing this to my attention with the banner announcement. (Although, it did give me pause real quick as expressed by @alael.)

All discussion CA & notifications has been moved here

This thread will serve as the support thread for the GPU statistics plugin (gpustat). UPDATE: 2022-11-29 Fix issue with parent PID causing plugin to fail Prerequisite: 6.7.1+ Unraid-Nvidia plugin with NVIDIA kernel drivers installed. 6.9.0 Beta35 and up no longer require a kernel build, but now require the Nvidia plugin by @ich777. Intel support requires the plugin install for Intel GPU TOP from @ich777. Both plugins can be found in Community Apps. Plugin is now live on CA but if you want to manually install see the below -- To review the source before installing (**You should always do this**): https://github.com/b3rs3rk/gpustat-unraid Manual Plugin Installation URL: https://raw.githubusercontent.com/b3rs3rk/gpustat-unraid/master/gpustat.plg Enjoy! ====================================================================== Information to Include when asking for Support: 1a) the result of 'nvidia-smi -q -x -i 0' from the UnRAID console (via SSH or the webterminal is fine) for NVIDIA support AND/OR 1b) the result of 'timeout -k .500 .400 intel_gpu_top -J -s 250' for Intel support AND/OR 1c) the result of 'radeontop -d - -l 1' 2) the result of 'cd /usr/local/emhttp/plugins/gpustat/ && php ./gpustatus.php' 3) a screenshot of the dashboard plugin (if issue is only seen during transcoding, then a snippet during transcode is best) 4) the contents of '/boot/config/plugins/gpustat/gpustat.cfg'

Use extra Unraid CPU or GPU computing power to help take the fight to COVID-19 with BOINC or Folding@Home! https://unraid.net/blog/help-take-the-fight-to-covid-19-with-boinc-or-folding-home Stay safe everyone. -Spencer

See here:

This idea comes from @forusim in the thread I started (see below) (quote) On the GUI would it be possible to draw the part of I/O wait different? Work I/O wait 70% ||||||||||| | | | | | | | | | | | | | | | | | | | | | | I find it useful to know, if drives are locking the system or the cpu is really doing stuff. (end quote)

Did we find a COVID-19 cure yet?? I see that the unRAID team is Top 5% Average Credit...

threw some PIA config files in the docker, and i'm off to the races.

Thank you @luisv That was the bit that I was missing. I'm up and running now!

Hi guys, I joined the team this morning with my 2 servers and my PC! I hope that will help.

In the last 24 hours, the combined has grown to 1250+

This temps are abolute OK. Max temp for a 3900X is 95°C where it shuts off to prevent damage. In between 70 and 80 it starts to clock itself down automatically to reduce heat production if you didn't changed anything in your BIOS. In general it's a discussion as long as CPUs exists. Did high temperatures hurt the CPU? What are to high temps? Will it degrade over time? At what rate? What's the lifetime of the silicon? Having it run at a constant temperature (inside specs) for a long time as far as I understand is better for the silicon than constantly change between low and high temps. Remember, every material more or less expands when heated up and contracts when cooled down. This cycles are what is causing the aging of the silicon up to the point, where it dies.

You need to put it back in. Set it like this <TemplateURL>false</TemplateURL>

I will try that as soon as i got home. But since I don't own this game it's really difficult to toubleshoot the problem, but i will try...

Unraid Nvidia IS a custom build of Unraid. You must use the Nvidia plugin to update to a new Nvidia build. If you just update Unraid you just get Unraid. All this is explained many times in the Nvidia thread.

Passkey will come eventually, I had mine turn up 12-24 hours later... servers are being crushed with requests from new folders... which is fantastic. Same applies with handing out WU, they simply are struggling to keep up.

mullvad pia airvpn

History disagrees. The first thing he did with it was send a message with an agenda...He wants everyone to know that the COVID-19 problem can be helped even just slightly by running algorithms for non-profits. This should be used for CA information only... What he did doesn't make him a bad guy, In fact his concern and tribute to what is happening in the world today is amazing... I just don't want it injected into MY Unraid server without consent. & I promise you, I will never consent... I love that we got moved to a new post and are discussing it but please... Hoopster... "Get off my lawn"

I logged in here and joined the team: http://boinc.bakerlab.org/rosetta/

https://support.cyberghostvpn.com/hc/en-us/articles/213982169-Why-are-my-P2P-download-rates-so-low-

You seem to misunderstand. I don't care what your opinion on the notification feature or the solicitation is and I'm not criticizing it. I am criticizing what you call "evidence". Just because someone else made an illogical conclusion doesn't make yours valid. Furthermore, there has already been one solicitation through this feature. That's a fact. The developer of the plug-in is offering no guarantee that there won't be additional solicitations in the future. To say it's far-fetched additional solicitations will be injected in the future is just ignorant. Lastly, this is not a limetech plug-in, so I don't know what makes you think limetech is somehow okay with this behavior. I have raised my concerns to their support team, though, so we'll see what they say.

Ok, so where's Red Dwarf then?

Thanks for chiming in @jonpI didn't for you to answer support tickets on a weekend! I bought this GPU ages ago, to say I got my money's worth out of it would be an understatement, I'm okay with retiring it. I suppose before I buy a new GPU, I should re-purpose the P2000 GPU into one of those slots to make sure passthrough works as intended and that it is in-fact this GPU that is causing the issue, I'll update this thread if I turn up anything else of interest.

Great advise @Kewjoe Updating manually to each version might have been annoying, but it definitely worked. Thank you so much for the help!!!

This isn't even logical. There is no voting mechanism, you're just assuming these 800+ people were okay with the solicitation. By that logic, can we just assume everyone who did not participate after the notification was not okay with the solicitation? Since we're just assuming here, I'll assume that the number of people who did not participate after the solicitation outnumber the people who did participate.

I agree with this. There should be a standard agreed on by the developers and the community at large. Discussion is key here. If CA did this now (my first experience with this in Unraid) where does it end? Do we start telling people about religions? Presidential candidates?

Joined the team today. A big virtual hug to all contributors from shutdown Italy. Hope you all doing well and thanks for Unraid notification to @Squid

BOINC-ing for team Unraid Will have to check how many watts when idle.

@JohnJay829 I use to use plexguide on a different box a long long long time ago. Make sure to backup your config file prior to modifying it. You should be able to adapt it to work with the scripts fairly easily. If plexguide hasn't changed (which I don't believe it has), it adds all the service accounts as separate remotes ( [GDSA01], [GDSA02], ect. ). This is NOT necessary with these scripts. You simply need 1 or 2 mounts depending on if you are encrypted (and solely using tdrive for storage). So to edit your config simply copy and paste the values from your [tdrive] and [tcrypt] into the "XXXXXX" for the following config (assume encrytion): [tdrive] values get copied here: [gdrive] type = drive scope = drive server_side_across_configs = true client_id = XXXXXXXXXX client_secret = XXXXXXXXXX token = XXXXXXXXXX team_drive = XXXXXXXXXX [tcrypt] values get copied here: [gdrive_vfs] type = crypt remote = gdrive:/encrypt filename_encryption = standard directory_name_encryption = true password = XXXXXXXXXX password2 = XXXXXXXXXX If you don't have encryption then you simply need [gdrive]. Now configure your mount script (self explanatory with the comments in the mount script). Run the mount script and you should see your files from your tdrive that plexguide was utilizing. --------------- Service account setup. If you still have plexguide running / on a hard drive, locate the service account files (.json). If memory serves me correctly they are stored in "/opt/appdata/plexguide/.blitzkeys/" and are named GDSA01, GDSA02....... You only need about 4-15 but you can grab as many as you want. I think plexguide defaults at something like 6ish. Might have to rename and remove the "0" in front of 1,2,3 ect to work with the script to properly work with their names or you can mass rename (see readme on github) but for a handful I'd just manually rename. Copy those to unraid "/mnt/user/appdata/other/rclone/service_accounts/" so now you have GDSA1.json, GDSA2.json, ect. Rclone upload script should be: RcloneRemoteName="gdrive_vfs", RcloneUploadRemoteName="gdrive_vfs", ServiceAccountFile="GDSA". Edit the rest of the script for your setup: script explains each variable. No need to re-add the service accounts into your team drive authentication... plexguide should already have listed them as members and given them access. --------------- That should be it. Simple transition, much cleaner config file. Unraid is about 100x more stable and less frustrating than plexguide. Everything can be changed and you get control over whats going on as oppose to plexguide utilizing a million scripts to perform in only 1 manner with no ability to modify functionality. Feel free to chime back in or pm me if you need help. I think everything should be as listed above but again, I'm recalling the plexguide configs and service accounts from memory

Thanks for this. Up and running now. I looked but didn't see if there was a unraid team # to join?

Full speed ahead Scotty we need more power.

Strangely, it's under FIle --> Select Comp for me but have updated with CTRL+Shift+I as a hotkey to open this. TY

One suggestion for the Boinc Install instructions. In order for the File->Select Computer option to show up, you have to switch to Advanced View. Simple view does not show that option.

We seem to have a pretty strong Chinese new user base LOL. This is the 2nd 1-post Chinese user I have seen this morning. On a serious note, it would be rather useful to have multi-language support and then enlist user contribution to translate Unraid to other languages.

we need chinese language

Has anyone found a way to remove unwanted audio streams while converting? Like I only need EN, not ES, DE, or others.

If memtest finds nothing try with a btrfs pool again, btrfs usually gets corrupted faster when there's a hardware problem, and the type of corruption might give a clue on what the issue is, just be sure to save the diags before rebooting.

Tools - Archived Notifications (Assuming under settings - Notifications you have it set to store them to flash You can also change the position of the notifications via those same settings

Nothing to do, safe to use. Most syslogs have ACPI messages, as the vendors and BIOS writers cater to what Windows wants, not to Linux. Sometimes when we see a lot of ACPI messages, we recommend looking for a BIOS update. There's absolutely nothing else you can do. A BIOS update *may* remove a few of them.