Leaderboard

Popular Content

Showing content with the highest reputation on 11/02/20 in all areas

  1. As you might now, DockerHub will be doing HUGE changes that affects users, read more HERE. The TL;DR is that each ip is only allowed to do 100 unauthenticated pulls in a span of 6 hours. FYI checking for updates counts as a pull. Logging in to a dockerhub account only doubles that. So for the request: Currently dockerMan only works well with images from dockerhub. Once you use another registry, it looses the aspect of being "up to date". This is troublesome for people and organizations that has, will or is currently migrating to other registries (Personally I now push to G
    7 points
  2. I am a Chinese user. Thank you for the script, I learned a lot of knowledge.
    2 points
  3. I've spent a few weeks getting my X570 AORUS Elite WiFi + 3900X + GTX1070 running to my liking so I thought I would share. These settings are also confirmed working on the AORUS Pro WiFi and AORUS Ultra. It will probably be similar for all the X570 AORUS boards. Here are the settings for USB passthrough, single Nvidia GPU passthrough, and more. Using BIOS F10. This is important as your IOMMU groupings can/will change with AGESA updates. UEFI / BIOS Settings: Tweaker -> Advanced CPU Settings -> SVM Mode -> Enable Settings -> Miscellaneous -> IOMM
    1 point
  4. Update: Slow parity check is a symptom of a 5.8 Kernel Bug where pre-Skylake CPUs get stuck at the minimum pstate MHz (often 800MHz). Scroll down in this thread for links to the associated Kernel bug and discussion. Otherwise, this link will jump you to my updated post in this thread. I've been noticing that 6.9.0 has been slower than 6.8.3 for disk access when using dockers (also the high amount of disk reads on my cache even after making them 1MB aligned, but that's another issue). I did my first parity check and it's markedly slower than historical. Normally
    1 point
  5. Je tiens à remercier @superboki pour tous ces tutoriels Unraid. Veuillez suivre!
    1 point
  6. Hi, Is it possible for me to change my username on the forum please? would like to change it to Juzzotec. Thanks
    1 point
  7. Interesting. So I just tried it with Romania - but had no luck. But then I went in and added the line from the FAQs A22, to the Romania file. And now it works! I'm not sure if certain locations are just not working, or if it had to do with where I put the cipher-fallback line, but it's working for me now! Very curious that you didn't need to add the line, but oh well! Appreciate your help @binhex and @diditstart!
    1 point
  8. Q22:- https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md
    1 point
  9. Dieses nutze ich jetzt https://hub.docker.com/r/linuxserver/sabnzbd/
    1 point
  10. Pour votre information: voici quelques tutoriels vidéo Unraid 🙂
    1 point
  11. merci pour c'est informations et les détails pour le NAS ( cela va me servir pour remplacer mon vieux synology ds413J ) si tu peux encore faire d'autres tutos , c'est le bien venu surtout en langue française , ils sont rare. Amicalement Phil
    1 point
  12. Yep, you'll need to verify evertyhing when importing anyways as the import from URL parser doesn't always get everything perfect anyways, but for now you'll need to convert manually for fractions. This is an ehancement/feature request to support fractions. I'd suggest logging a comment to show your support for wanting fractions as well. https://github.com/vabene1111/recipes/issues/142
    1 point
  13. You DO NOT need to purchase a new license. Upgrades are FREE.
    1 point
  14. just the bz that you replaced only. Or you can upgrade to a newer Unraid version via the normal method and it will also work without the patch.
    1 point
  15. Yes you can but then you have to do that every ~3 months and that does not seem like a solution to me. docker exec -it NginxProxyManager sh and then certbot renew But a quick google shows that in CloudFlare you should be able to exclude an url (yoursite.com/.well-known/*) from being cached and then it should work perfectly.
    1 point
  16. Cache device is dropping offline: Nov 2 09:36:58 Tower kernel: pcieport 0000:00:06.0: AER: Uncorrected (Fatal) error received: 0000:00:00.0 Nov 2 09:36:58 Tower kernel: nvme 0000:05:00.0: PCIe Bus Error: severity=Uncorrected (Fatal), type=Inaccessible, (Unregistered Agent ID) Nov 2 09:37:29 Tower kernel: nvme nvme0: I/O 710 QID 14 timeout, aborting Nov 2 09:37:29 Tower kernel: nvme nvme0: I/O 711 QID 14 timeout, aborting Nov 2 09:37:29 Tower kernel: nvme nvme0: I/O 712 QID 14 timeout, aborting Nov 2 09:37:29 Tower kernel: nvme nvme0: I/O 713 QID 14 timeout, aborting Nov 2 09:37:29 T
    1 point
  17. See here for some benchmarks on the possible performance with various controllers, of course board/CPU are also a factor, i.e. a PCIe 3.0 HBA will only perform optimally with a PCIe 3.0 board/CPU.
    1 point
  18. Just keep in mind that if your certificate needs to be renewed it will most likely fail due to the same issue!
    1 point
  19. Guten morgen, ich habe vor einem 3/4 Jahr auch den Umzug von Synology (415+) auf Unraid gemacht. Ich selbst nutze ebenfalls Plex und mache Hardwaretranscoding mit der iGPU meines Intel Xeons. Bzgl Datenbankumzug von Plex gibt es in Youtube ein Video von SpaceInvader, in welchen er zeigt, wie man die Plex Datenbank von einem Docker Container in einen anderen verschieben kann. Evtl. kannst du damit was anfangen. (Deine Datenbank von Synology verschieben und dann im Docker auf Plex einbinden) Verschlüsselung der Daten kannst du in Unraid in Settings einstellen. Ich denke, dass
    1 point
  20. Hi JorgeB: Indeed, there was some issue with the PCIE slot I was using, not sure what is the issue but, I switched my graphics card P200 and the NIC, and now it shows up. I will setup pfsense now. Thank you all. you guys are the best.
    1 point
  21. Maximum check period is 4 times per day, so you'd have to have 50 containers installed and all 50 show an update to get nailed by it. (Settings - Notification settings) Yup. Because the system works by the repository entry. It all works out in the end, and will adjust itself over time. But, I do have a couple of pet peeves with how some apps are handled by the maintainers that modifying how this works will fix my OCD
    1 point
  22. I believe that dockerMan already does support other registries on 6.9. (https://github.com/limetech/webgui/pull/650 unless I'm misreading what this is for ) Tomorrow, once the change actually takes effect, I will be testing whether it's a container pull or an image pull (multiple images in a container) that counts towards the quota. Realistically, it shouldn't affect many users around here (uber power users and some developers being the exceptions). On a quick look at the coding, it's not that hard to add in dockerHub credentials to the system to allow you 200+ pulls every 6 ho
    1 point
  23. Look at /mnt/user/appdata/NginxProxyManager/log/letsencrypt.log, you should have more details about the failure.
    1 point
  24. Done. Process worked great, thank you!
    1 point
  25. Two mode balance-tlb: Outgoing traffic is load balanced, but incoming only uses a single interface. The driver will change the MAC address on the NIC when sending, but incoming always remains the same. balance-alb: Both sending and receiving frames are load balanced using the change MAC address trick. http://www.enterprisenetworkingplanet.com/linux_unix/article.php/3850636/Understanding-NIC-Bonding-with-Linux.htm
    1 point
  26. Lolz, just looked at your parts list. We have a lot in common. Here are some thoughts; - Up the DRAM speed. The AMD CPU likes 3200MHz or even 3600MHz. I have 4x16GB of G.Skill Ripjaws 3200. - Do use multiple HDDs for parity support. - Consider an SSD cache in front of your main HDD array. I initially didn't have any cache but ended up putting a pair of (mirrored) 250GB SATA SSDs for better performance. - I also had a second NVME drives, one dedicated for each of the primary OSs (Mac and Win10). - Change your video card to something current unless there is a specific
    1 point
  27. I'm on an AsRock x570 board with a 3950x and my system is rock solid. But in general would recommend staying away from AMD video cards. I had endless issues with a 5700xt which would cause random reboots when shutting down a VM with the card passed through. Also had issues getting the card into a low power mode (tended to pull >100W even if the VM was shutdown). I believe this all comes down to the long standing AMD VFIO Reset Bug. There are patches for linux that work around this issue but last time I checked they are not in Unraid because they caused their own stability issues.
    1 point
  28. Anyone else having trouble with the server list? I’ve been running mine daily with no issues for a while, but when I went to do a manual test recently it threw back nothing. So I popped into settings where I had manually selected a nearby Spectrum server and the list that’s coming up now has very few servers and none anywhere near my state (Florida). If I go to the Speedtest website it auto selects the nearby server so I don’t know what’s going on. to make sure it was still at least working I changed it to Auto and it selected something in Nebraska or something. It worked though and
    1 point
  29. v0.3 released: - changed undervolt installation method Now undervolt is not installed by URL, instead its installed through the pip/setuptools package management, which is the recommened method to install python packages.
    1 point
  30. Je me suis servi du Docker Krusader. Je me suis connecté sur le premier serveur et la même chose sur le 2e . Il fonctionne un peu comme des logiciel de transfert FTP comme Filezilla ou Transmit sur mac.
    1 point
  31. I have the ASUS TUF Gaming X570-Plus (non-wifi). I would not recomend you to buy this board. I have two gpus but can only use one of them as the system hogs one of them and stubbing does not make any difference. I have a multi-controller USB pci-e x4 whitch I can't connect, so I had to use a single controller usb x1 to be able to get some more usable usb-ports for vm's. Adding a third pci-x1 gpu to use as dummy disables the network.
    1 point
  32. I just edited the repo to be portainer-ce and it upgraded just fine.
    1 point
  33. Quick look at the plateforms and MBs, the x299 provides 5GBE/1GBE vs 2.5/1 on the x570. As well as more M.2 and SATA ports. All things been close (in price apparently, for the speed I don't know), the Intel looks more interesting. (I swear I am not an intel fanboy ; would love for amd to be more competitive on this segment as well, but Threadripper is pretty pricy ) Let's see what the guys that do use VMs think (I don't).
    1 point
  34. don't know much about those processors relative performance but I can still make a few remarks: forget 3600MHz RAM, the intel is only rated for 2933 and the amd for 3200 the intel provides way more PCIE lanes than the amd part 48 vs 20, this means that you can actually have 2x PCIEx16 in the intel (and leaves you room for expansion like an HBA card), not on the amd https://www.amd.com/en/products/cpu/amd-ryzen-9-5950x https://ark.intel.com/content/www/us/en/ark/products/198017/intel-core-i9-10980xe-extreme-edition-processor-24-75m-cache-3-00-ghz.html This c
    1 point
  35. Thanks to your comment I found out the user and passwd as well lol. Cannot find it in the front page or installation page. Not sure how to edit it either.
    1 point
  36. B550 Motherboards is not good for iommu groups. I don't know if a bios correct this. Choose an x570 it's better. Envoyé de mon HD1913 en utilisant Tapatalk
    1 point
  37. I asked this question by myself and found out that this message is created through the underlying Slackware: https://www.linuxquestions.org/questions/slackware-14/locking-all-cpu's-to-their-maximum-frequency-4175607506/ So I checked my file as follows: cat /etc/rc.d/rc.cpufreq #!/bin/sh # # rc.cpufreq: Settings for CPU frequency and voltage scaling in the kernel. # For more information, see the kernel documentation in # /usr/src/linux/Documentation/cpu-freq/ # Default CPU scaling governor to try. Some possible choices are: # performance: The
    1 point
  38. I know that the ASRock Taichi X570 has got a pretty good rep. https://www.asrock.com/mb/amd/x570 taichi/ I'm running the Phantom Gaming X with the additional 2.5Gb ethernet but it's basically the same board. I run a bunch of virtual machines, Win/Mac/Linux. This board is great because it has buckets of onboard hardware; - 8 x SATA ports - 3 x NVME - 3 x PCIE 16x If you plan on maxing it out with add on cards and NVME drives then you will need to pay attention to how to cut up the PCIE lanes. From memory the 3rd PCIE slot shares a x4 lane with the 3rd NVME slot. This i
    1 point
  39. I had the opportunity to test the “real word” bandwidth of some commonly used controllers in the community, so I’m posting my results in the hopes that it may help some users choose a controller and others understand what may be limiting their parity check/sync speed. Note that these tests are only relevant for those operations, normal read/writes to the array are usually limited by hard disk or network speed. Next to each controller is its maximum theoretical throughput and my results depending on the number of disks connected, result is observed parity check speed usi
    1 point
  40. Here they are with F10 bios and above settings. The Fresco Logic FL1100 is a PCIe card.
    1 point
  41. Your BIOS is a few versions older than what is still available on MSI website. If you update load defaults and adjust for what you need/had, then verify Cool'n'Quiet is enabled, HPET is enabled and ACPI is enabled. If you overclock or adjust voltage go back to stock until you verify frequency scaling is working or you give up. Boot into unRAID and grab another diagnostics.
    1 point