Leaderboard

Popular Content

Showing content with the highest reputation on 04/01/21 in all areas

  1. Ever wanted more storage in your Unraid Server. See what a 2 petabytes of storage looks like using Nimbus data 100TB ssds. (check todays date )
    7 points
  2. Big News from NVIDIA Just a few hours ago, NVIDIA added an article to its support knowledge base regarding GPU passthrough support for Windows VMs. While we've supported this functionality for some time, it was done without official support from the vendor themselves. This move by NVIDIA to announce official support for this feature is a huge step in the right direction for all of our VM pass through users. This should also help instill confidence in users that wish to pass through these GPUs to virtual machines without the worry that a future driver update would break this functiona
    2 points
  3. This is absolutely brilliant @SpaceInvaderOne!
    2 points
  4. Ist im Dockerfile das Port das für das WebGUI verwendet wird mit EXPOSE definiert? Wenn nicht ist das der Auslöser. Warum brauchst du das? Braucht der Container Zugang zum Host? Bzw hast du eineige container mit Bridge und einige im Custom Netzwerk? Container die im gleichen Netz sind können miteinander kommunizieren. Genau, aber das ist eigentlich ein Sicherheitsfeature von Docker damit das Netzwerk vom Host und Docker getrennt wird. Mit dem VLAN "umgeht" Unraid dieses Feature und alles kann mit allem kommunizieren.
    2 points
  5. Back about ten years ago, I decided I had a storage space problem. So I looked around to see what was available. I don't remember what was around at the time but I came across the unRAID product. So you load something on an USB and then boot to it and it then sees all the attached drives. Create shares, add data and you're good. It has data recovery as well in case of drive failure. Sounded pretty much agnostic as far as motherboard hardware was concerned. Interesting concept. And an online community with all kinds of info. Like any IT guy with 20+ years of hardware ex
    2 points
  6. Unraid Kernel Helper/Builder With this container you can build your own customized Unraid Kernel. Prebuilt images for direct download are on the bottom of this post. By default it will create the Kernel/Firmware/Modules/Rootfilesystem with nVidia drivers Currently supported drivers/modules: Nvidia, DigitalDevices, LibreElec, TBS OpenSource, iSCSI Target, Intel iGPU, ZFS, Mellanox Firmware Tools, Navi Reset Patch, gnif/vendor-reset, Intel Relax RMRR Patch nVidia Driver installation: If you build the images with the nVidia drivers please make sure
    1 point
  7. Finally got this monster up and running after weeks of finding the right parts new and used. It took a while but I am now there. This super beefy machine now has excellent cooling, super silent and currently runs everything I need with room to spare. Specs: Ryzen 3900 65w TDP 32GB DDR4 3000Mhz Quadro P600 LSI 8I SAS with expander for 16 HDDs + 6 from mobo (active cooled mod) 1TB NVME cache 256GB NVME on PCI-e 1x MSI Gaming pro motherboard x470 650W PSU Quad Port Intel Nic for isolating VMs 10GB SFP+ Nic for main connection
    1 point
  8. It may work, but that's no guarantee. Some vega20 cards seem to refuse baco reset (bus active chip off)... If you dont mind, could you share your vendor/model with us and maybe try it out and share your results with us? We would highly appreciate that
    1 point
  9. For real, at least for a sample size of 2 posts so far.
    1 point
  10. 1) yes 2) any name (it appears as a name for the worker, so you can separate multiple GPUs) 3) Probably, google it 4) Perfectly normal for Quadro cards as they can't be overclocked/they are locked.
    1 point
  11. From what I know it should work. Eventually @giganode can help.
    1 point
  12. In host most the container accesses the host's network directly and the port mappings have no effect. Bridge mode gives more flexibility and lets you use port mappings. Switch to bridge mode so you can change the ports that SWAG uses. Unraid uses 80 and 443 by default. See Settings -> Management Access -> HTTP port and HTTPS port
    1 point
  13. This will never work because macOS kernel nor the hypervisor for macOS support AMD-V (SVM) cpu feature. Basically put, anything that uses macOS's hypervisor requires Intel's vmx cpu feature.
    1 point
  14. Brilliant. Thanks for the update!
    1 point
  15. Since you don't have a parity disk defined, I'd set a new config and assign one new 8TB as disk 1, remove the empty disk, and set the disks you want to keep sequentially after, followed by the disks you want to remove. Then rearrange the data either manually with rsync, mc, or you could use unbalance. Once the data is where you want it, set another new config and assign only the disks you are keeping.
    1 point
  16. Richtig gut - Dank dir, @ich777 !
    1 point
  17. Switch endpoint, it's just likely a pia outage for whatever endpoint you are attempting to connect to
    1 point
  18. .....und da unraid eben kein vollwertiges Interface für die Linux-Firewall hat, sollte man das Feature eben nicht an dieser Stelle, auf dem unraid Host verwenden. Mit einem VLAN fähigen Router kann man das auch, mit etwas Tüftelei, erzwingen/hinbiegen in der dortigen Firewall. Das ist genau der Punkt...."Zugang zum Host" meint einen IP basierten Dienst auf dem unraid Server selbst (Plugin, Web-UI). Alles andere ist in einem der weiteren VLANs. Einen VLAN fähigen Switch gibt es schon für ein paar Kröten mehr. Damit lässt sich zumindest eine Trennung erreichen.
    1 point
  19. 1 point
  20. It also provides an offsite backup of your flash drive.
    1 point
  21. Please mark this as solved. I have no idea why the upgrade removed br0 for me. But simply adding it back in network settings did work. Thank you for the help!
    1 point
  22. Bonjour, merci pour cette proposition, j'ai pu démarrer l'OS.
    1 point
  23. no problem. there's a bit of a learning curve if you're new to unraid or linux in general. but i think you'll find it's well worth it and a fun learning experience. welcome to the forums!
    1 point
  24. Unless you have sensitive data to protect I wouldn't encrypt your array. The only person that will end up locked out of your data is you. Encryption comes with risk that typically would be outweighed by the need for security. This doesn't sound like one of those cases.
    1 point
  25. Thanks a lot will do! Appreciate the links very new to unraid
    1 point
  26. The plugin allows for remote connection to your server. It uses the form via SSL to connect to your machine so you can admin it remotely.
    1 point
  27. You were told to post a bug report??? Probably you were told to post a new thread in General Support.
    1 point
  28. Doch, natürlich funktioniert das, wenn Du die Docker nicht auf das Host-Network br0 drauflegst, sondern auf eine andere Bridge. Ich habe "Host access to custom networks" weiterhin auf "disabled". Was hat der unRaid Host denn auch in meinen Dockern zu suchen? Bei mir habe ich, wie gesagt, VLANs aktiviert und Docker können lustig untereinander und ins I-Net kommunizieren...nur nicht zum unRaid Host selbst. Das Inter-VLAN-routing macht mein Router.
    1 point
  29. Seconding what @itimpi has stated here, we will be updating docs to reflect best practices. Thanks for bringing this to our attention and please, continue to make us aware of anything that is confusing, inaccurate, or out of date with the wiki.
    1 point
  30. Yup i can connect now both ways without an issue. Good lord.... so sorry to bother you for something so stupid. Thank you for being patient and trying to help
    1 point
  31. Auf der Kommandozeile im Container... und dann so wie hier: https://smarthome.buanet.de/2020/10/iobroker-docker-container-updates-upgrades/
    1 point
  32. Tools - New Config will let you assign disks however you want and then rebuild parity. The disks will be taken as they are with their existing contents, and parity will be rebuilt based on the data disks assigned to the parity array.
    1 point
  33. I don't think so because they also said: and also: I think they will not support the feature anywhere in the near future... But this is the first step in the right direction sort of.
    1 point
  34. I did see it behave like it should a few minutes after Squid replied with his success, I just wanted to wait a few hours to confirm. It does look solved, I would say. As for the cause, all the token stuff worked everywhere else I use them, so its a mystery to me.
    1 point
  35. several of us are using this: and using the hpssa option to enable it I use it on a p420i that does not have native hba mode. If yours supports hba mode, then it should be ok and you'll save yourself a pci slot for other things.
    1 point
  36. Yeah the pfSense-sponsored WireGuard implementation for FreeBSD had some issues. Does not affect Unraid.
    1 point
  37. On Settings -> Network Settings -> Eth0, is bridging enabled? Would you mind posting a screenshot?
    1 point
  38. Nice tips, I just wish it would be easier to setup KeysFile authentication and disable password authentication for the SSH. Just placing your pupkey in the UI and setting a checkbox to disable password auth would be nice. I currently have it setup like ken-ji describes here. Then i edited PasswordAuthentication to "no". Also think about a secure by default approach with future updates. Why not force the user to set a secure password on first load? Why even make shares public by default? Why allow "guest" to access SMB shares by default? Why create a share for the fl
    1 point
  39. Anyone know where to find instructions on how to get this working with the ASRock motherboards? I noticed that it says there needs to be a kernel patch and that is above my knowledge 😄 so if anyone has an easy idiots guide to get this working please let me know. I'd like to get the RGBs on my memory modules, and CPU fan working right.
    1 point
  40. you'd have to dump the bios of the 1030 gpu. Spaceinvaderone has a video on how to do it
    1 point
  41. I started in February 2011. Same as you - I put together a lash-up comprising a random mini-ITX board (probably a 32bit VIA CPU at that time) and three or four random drives. I specifically did this to see for myself how the missing disk scenario would be handled. It was just so easy to get it working, pull a drive and still have the data available, and to rebuild as needed. That was Unraid version 4.7 I think. I now have four licenses, three servers (main, backup and my daughter's). I am also very happy with the software.
    1 point
  42. I had the same problem that JasonP had, and running "unraid-api restart" in a terminal fixed it also. But mine is still showing "Access unavailable" in the my server list... it says it is online and shows all my stats... EDIT: It figures it would change to "Remote access" right after i posted this.
    1 point
  43. 1 point
  44. https://forums.unraid.net/topic/75539-support-binhex-qbittorrentvpn/?do=findComment&comment=951967 If you are using binhex's containers, or any derived directly from his work, you will need to follow this post.
    1 point
  45. Sooo... I might be of some help, for a change. I had the problem with login to my Apple ID and had various error messages like "could not communicate withe server" or "this computer already registered to many ID's" (or something like that. I did two things : 1 - I fixed the En0 following this guide. The problem was thas I had a network adapater as En0 but it was not marked as built-in. 2 - I notice that even if I filled out the "PlatformInfo" tab in the OpenCore Configurator as shown in the video (with mac model, serial number etc...) when I click
    1 point
  46. I would like to replace my current 4TB parity drive with a 6TB drive; however, I don't have any available SATA ports for the new disk. I believe I can do the following; however, can someone confirm as this is the first time I'm going through this process. Perform parity check Shutdown server Remove current parity drive and connect the new one Turn system back on System will indicate an error in that the parity disk is not connected, so I assign the new 6TB drive as the parity drive Start the array and allow it to rebuild parity At a lat
    1 point
  47. 1) If necessary, generate an SSH key on your Mac or Linux machines, using ssh-keygen. 2) Create an authorized_keys file for the unRAID server, using the id_rsa.pub files on all the machines which require access. 3) Copy this file to your server's /root/.ssh/ folder. This will work until a reboot. To handle a persistent setup: 1) Copy the authorized_keys file to /boot/config/ssh/. 2) Add this to the end of.your /boot/config/go, using your preferred editor: mkdir /root/.ssh chmod 700 /root/.ssh cp /boot/config/ssh/authorized_keys /root/.ssh/ chmod 600 /root/.ss
    1 point