Leaderboard

Popular Content

Showing content with the highest reputation on 04/13/21 in Posts

  1. DEVELOPER UPDATE: 😂 But for real guys, I'm going to be stepping away from the UUD for the foreseeable future. I have a lot going on in my personal life (divorce among other stuff) and I just need a break. This thing is getting too large to support by myself. And it is getting BIG. Maybe too big for one dash. I have plenty of ideas for 1.7, but not even sure if you guys will want/use them. Not to mention the updates that would be required to support InfluxDB 2.X. At this point, it is big enough to have most of what people need, but adaptable enough for people to create custom panels to add (mods). Maybe I'll revisit this in a few weeks/months and see where my head is at. It has been an enjoyable ride and I appreciate ALL of your support/contributions since September of 2020. That being said @LTM and I (mostly him LOL) were working on a FULL Documentation website. Hey man, please feel free to host/release/introduce that effort here on the official forum. I give you my full blessing to take on the "support documentation/Wiki" mantel, if you still want it. I appreciate your efforts in this area. If LTM is still down, you guys are going to be impressed! I wanted to say a huge THANK YOU to @GilbN for his original dash which 1.0-1.2 was based on and ALL of his help/guidance/assistance over the last few months. It has truly been a great and pleasurable experience working with you man! Finally, I want to say a huge thanks to the UNRAID community and its leadership @SpencerJ @limetech. You guys supported and shared my work with the masses, and I am forever grateful! I am an UNRAIDer 4 LIFE! THANKS EVERYONE!
    4 points
  2. This release contains bug fixes and minor improvements. To upgrade: First create a backup of your USB flash boot device: Main/Flash/Flash Backup If you are running any 6.4 or later release, click 'Check for Updates' on the Tools/Update OS page. If you are running a pre-6.4 release, click 'Check for Updates' on the Plugins page. If the above doesn't work, navigate to Plugins/Install Plugin, select/copy/paste this plugin URL and click Install: https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg Bugs: If you discover a bug or other issue in this release, please open a Stable Releases Bug Report. Thank you to all Moderators, Community Developers and Community Members for reporting bugs, providing information and posting workarounds. Please remember to make a flash backup! Edit: FYI - we included some code to further limit brute-force login attempts; however, fundamental changes to certain default settings will be made starting with 6.10 release. Unraid OS has come a long way since originally conceived as a simple home NAS on a trusted LAN. It used to be that all protocols/shares/etc were by default "open" or "enabled" or "public" and if someone was interested in locking things down they would go do so on case-by-case basis. In addition, it wasn't so hard to tell users what to do because there wasn't that many things that had to be done. Let's call this approach convenience over security. Now, we are a more sophisticated NAS, application and VM platform. I think it's obvious we need to take the opposite approach: security over convenience. What we have to do is lock everything down by default, and then instruct users how to unlock things. For example: Force user to define a root password upon first webGUI access. Make all shares not exported by default. Disable SMBv1, ssh, telnet, ftp, nfs by default (some are already disabled by default). Provide UI for ssh that lets them upload a public key and checkbox to enable keyboard password authentication. etc. We have already begun the 6.10 cycle and should have a -beta1 available soon early next week (hopefully).
    2 points
  3. Today's blog follows a couple of student's educational journey with Unraid in their classroom: https://unraid.net/blog/unraid-in-the-classroom If you are an educator and would like to teach with Unraid in the classroom, please reach out to me directly as we would love to support this educational program at your place of instruction!
    2 points
  4. With E-bay and LSI cards, you are buying the vendor. Look at the Vendor's reputation. See what his policy is on returns. You could ask a question of him to see what his response is and how quickly he answers you. Look to see how long he has been a E-bay vendor. There are a lot of the older LSI cards that are advertised as 'New'. Well that is a sure sign that they are counterfeit! (LSI has 'disappeared' as a separate company several years ago. You can find online that the rights now belong to Broadcom. You can find what they currently make here: https://www.broadcom.com/products/storage ) However, Broadcom apparently still sells those older chip sets and several(?) Chinese companies have copied the design of the older LSI boards (right down to the paper labels used on the genuine cards)! These boards are usually referred to as counterfeit as the true origin is being concealed. And no one has any idea what the quality level of these cards are. (Remember that while genuine LSI chips are (probably) used, everything else is sourced elsewhere.) Some of these manufacturers may produce a quality product but without his identifying marking on the board, there is no way for a average consumer to figure out what he is getting! An long term E-bay vendor, with a reputation to protect, will be vetting his sources carefully to protect it.
    2 points
  5. thanks for your kind words @Masterwishx. if you don't want to use the ip address to mount remote smb share, you best bet will be to ask for some help troubleshooting the unassigned device plugin in that specific support forum here.
    2 points
  6. Here is the link you posted a few years ago. http://talesinit.blogspot.com/2015/11/formatted-with-type-2-protection-huh.html Sent to some else yesterday with type 2.
    2 points
  7. This is not a problem with Preclear itself, but with Unraid and the mechanism it uses to track unassigned drives usage. Let's see if@dlandon have a clue of that's going on here. Enviado de meu SM-G985F usando o Tapatalk
    2 points
  8. Hallo YB1898 Vielen Dank nochmals für deine Nachrichten, du hilfst mir hier wirklich enorm. Ich werde das ganze heute Abend genauer anschauen. Dieses Bild erklärt relativ gut was passiert ist, als ich aus Verzweiflung in dem Thema aufgegeben wollte:
    2 points
  9. Look what you did! Jk. Sincerely wish you all the best @falconexe as you take some time away. Thank you for everything. 🙏🏼
    2 points
  10. Yes, just add them as you need them.
    1 point
  11. For now forget about increasing or evaluating security and GET THOSE THINGS BACKED UP. Once you have offline backup of items you can't afford to lose, then start dealing with the rest of this. Once you have a backup strategy in place, then you can start evaluating open ports and examining the security of each of the answering services. Of course all this assumes you haven't put your server in the DMZ or anything like that.
    1 point
  12. It's in the beta. Switch your repository to emby/embyserver:beta or wait for the next release.
    1 point
  13. Apple deprecated AFP themselves in 2013 in favour of SMB as I understand it.
    1 point
  14. I made a new version, let me know if it fixes it
    1 point
  15. Unfortunately not binding it to VFIO at start causes virtman to hang up and ultimately the entire server to crash binding to VFIO makes the VM start up but no image is output. I can happily tell you though, that mining performance has not suffered a single mh/s when mining eth against bare metal mining!
    1 point
  16. i just bought one from Ebay from italy. the guy seems to have more, but give me a day to test mine out before buying: https://www.ebay.de/itm/Controller-SAS-D2607-A21-LSI9211-8i-Flash-in-IT-Mode-CAVO-SAS-4-porte-SATA/274744468973?hash=item3ff80be5ed:g:5yAAAOSwnEFf7a0P ebay germany allows you to filter for products which are within EU: https://www.ebay.de/sch/i.html?_from=R40&_nkw=lsi+9211-8i&_sacat=0&rt=nc&LH_PrefLoc=3
    1 point
  17. don't buy from China. they are usually fake especially when talking about older ICs. go for a part from EU and pay a fair price. A 9211-8i is around 45 Euros in EU. a 9207-8i is around 80-90Euros. if you buy a counterfeit, you risk breaking your mb or end up with a 22Euros paperweight.
    1 point
  18. this is your issue, taken from your log:- 2021-04-13 09:07:57 TCP: connect to [AF_INET]213.152.188.12:443 failed: Connection refused it looks like your openvpn config file '/config/openvpn/nl913.nordvpn.com.tcp.ovpn' is out of date, re-download from your vpn provider and replace the existing one.
    1 point
  19. If you are unable to login to the webgui as root, your best bet would be to wipe your passwords: See https://wiki.unraid.net/Articles/Frequently_Asked_Questions#What_do_I_do_if_I_have_forgotten_my_root_password.3F I'm not sure what version of Unraid you are on, but I recommend updating to the latest before setting your passwords. It should resolve the issue you were having with the browser setting everyone to the root password.
    1 point
  20. Danke an Dich 👍 habe jetzt Deine Vorschläge jetzt umgesetzt und eingetragen. Die Einträge für die Karte in der Syslinux Config hatte ich eigentlich auf dem Schirm, aber dann vergessen einzutragen. 😱 mal sehen ob das hilft... bis jetzt jedenfals keine Fehlermeldungen im System Protokoll. ich werde weiter beobachten... Achsoooo... Ja, ich bin auf Unraid 6.9.2 und benutze das DVB Plugin
    1 point
  21. Hallo Jungs ihr glaubt es nicht anderer Browser und schon lief Krusader. Natürlich habt ihr recht, wenn ihr schreibt das man vorsichtig damit umgehen solle. Das werde ich auch. Gibt es irgendwelche Unterlagen zu Unraid und Krusader? Vielen Dank für eure zahlreiche und vor allem schnelle Hilfe. MfG Jürgen Habt ihr Tipps für mich bei Einstellungen oder was ich beachten sollte?
    1 point
  22. Stop array, unassign the disable disk, start array, check that the emulated disk is still mounting, stop array, re-assign the disk, start array to begin rebuilding.
    1 point
  23. I think in theory you can dynamically stub it, but a lot of the problems I had pre the isolation feature were caused by a terminal or docker latching onto it and never letting go (which causes the VM to error with "busy" if I remember correctly). I would definitely recommend keeping it isolated and just doing whatever work you need in the VM until SR-IOV goes a bit more mainstream, which as I understand will resolve the issue by allowing vGPU slices to be allocated.
    1 point
  24. For me on up-to-date UnRaid (6.9.2) (there were more workarounds needed on the older ones) it was as simple as: Isolate card in Tools -> System Devices (Reboot) VM Setup, as you want apart from swap graphics to the card and make sure to tick the NVIDIA devices in "other PCI Devices", save. To avoid the Ryzen 3000 VM bug (due to be fixed soon I think), reopen the config and switch to XML mode. Change "host-passthrough" to "host-model" and delete the cache line 2 lines after that Save and start and you should be good Let me know how you get on.
    1 point
  25. Disks are formatted with type 2 protection, try removing that, you can find out how by googling it.
    1 point
  26. Starting with 6.9, Unraid is controlling UD disk spin down. Because preclear activity is not being tracked as disk activity, Unraid sets the disk as spun down. It's really not spun down, but Unraid thinks it is. When this happens, UD does not get the temp, or r/w stats for the disk from Unraid to display. It's really only a visual thing and doesn't affect the preclear operation. There is currently no plan to change this.
    1 point
  27. Those logs line up with what @gfjardim said above, and I think they're spot on. If I was you I'd let the preclear finish and then confirm that the SMART data is valid after that. Definitely keep an eye on the current temperature data afterwards and make sure it updates as expected, as that is one of the more frequently updated SMART data points, and one that the system likely relies on. You can monitor it for a while before you add it to your array of course, but I think your drive is fine.
    1 point
  28. The pre-clear is still in progress, now onto the post-read. The disk is not in the array, it's unassigned devices and the disk info label is not clickable. Pre-clear preview as currently stands below Disk log diskinfo_log also attached, which shows lots of entries where SMART info is not being found. Should I pause the pre-clear to run a SMART test? No SMART info seems to be available below. I'm also sure I added the, manufacture and purchase date and warranty period information to the disk yesterday, parhaps when pre-clear was already in progress. diskinfo_log.txt
    1 point
  29. It wasn't on purpose, I promise!! You've put a lot into this and it's appreciated. Get yourself sorted out, and I pray we see you back some day.
    1 point
  30. If this pre-clear is still in progress, can you please share your smart data from Main > Drive Name > Download next to Download SMART Report? Alternatively this is also in diagnostics.zip. You should be able to see the smart data on this screen too. As long as the smart data is visible there (and not wildly inaccurate) it's not an issue with your drive. ie.
    1 point
  31. Please see the 2 posts bevore your post.
    1 point
  32. I struggled to get a gpu passed through untill 6.9 came out. After that I managed to get a vbios dump from my card and everything works fine now. GPU and USB passed through perfectly.
    1 point
  33. Eigene negative Erfahrung. Hab am Anfang den Nextcloud Sync Klient verwendet. OMG, war der schlecht. Ich war immer auf der Suche nach Dateien die Nextcloud angeblich per GUI erhalten hatte, die aber nicht synchronisiert wurden. Das selbe negative Ergebnis mit WebDAV. Vor ca. vier Jahren hatte ich in einer großen Firma auf Nextcloud mit 90 Benutzern umgestellt. Die Prügel die ich erhielt kannst Du Dir nicht vorstellen ... Auch heute halte ich einige Features in Nextcloud für Gefrickel von irgendwelchen Skript-Kiddies nach dem Motto "GUI Regeln, sch*?+# drauf, ich kann das besser". Es ist aber leider, muss es leider so sagen, die beste Lösung für diesen Preis. Alle Benutzer arbeiten hier auf den SMB Ordner selbst. Nextcloud macht sein Ding im Hintergrund und sorgt für GUI - wenn man sie denn benötigt. Über Kalender, Kontakte, ... kann ich nicht meckern. Beispiel zum Thema frickeln: Hab aktuell zum Beispiel auf allen Android Geräten die Nextcloud App drauf und den Kamera Ordner zur Synchronisierung in individuelle Ordner pro Benutzer eingerichtet. Mit jedem neuen Bild meldet Nextcloud einen neuen Ordner - ob man diesen denn wohl synchronisieren will. Auf meinem eigenen Gerät mit einer halbwegs aktuellen Android Version, sind schon wieder 20 Ordner mit dem selben Namen (*/DCIM/Kamera) aufgelaufen. Das alles geht über alternative Tools besser. Seit einem der letzten Android App Updates kann es passieren, dass die Tree (die Pane, der Baum links) auf maximal einen cm und auf einen Buchstaben reduziert wird. Da steht dann untereinander A, B, C, ... Da hilft es nur die App abzuschießen. Oder die kürzlich durchgeführte GUI Änderung in der App. Auf manchen Geräten kommen die Leute nicht mehr einen Schritt zurück. Die Standard-Icons am unteren Rand sind verschwunden, auf manchen Dialogen fehlt dann auch noch der Back-Arrow. Bis ich allen erklärt hatte, dass sie mit dem Finger vom oberen Rand runter wischen müssen, damit die drei Standard Icons, und damit das Back-Icon, am unteren Rand erscheinen, hatte ich schon wieder keine Lust mehr. Wer kommt auf solche Design-Entscheidungen? Früher gab es mal die CUA (Common User Access Rules) von IBM später auch Microsoft. Auch heute noch ist Vieles davon gültig - aber wer kennt das denn noch? Da sitzen Großkonzerne wie Google, Microsoft mit einem Heer an Designern und Testern an guten GUI Regeln, und dann komt Herr/Frau Skript und sagt "nee, das geht wirklich nicht, meine Dialoge müssen Pink sein". Bin grad wieder über Nextcloud gefrustet - sorry.
    1 point
  34. Hi Doublemyst Hier ist die Schritt für Schritt Anleitung: https://temporaryswiss.ch/schritt-fuer-schritt-anleitung-zum-einrichten-des-eigenen-mapping-servers/ Anstelle des Raspi kannst du sicher ohne Probleme ein Linux im Docker aufsetzen. Ich habe bei mir das ganze etwas anders aufgebaut, ich verwende die Gratis Home Version von Sophos UTM (bis 50 IP's). Dort habe ich eine bei mir (VM) und eine bei NetCup (VM) welche ich dann über einen RED Tunnel (wie eine VPN) verbinde. So kann ich für sehr wenig Geld 2.69 Euro für den Server und 1 Euro pro weitere fixe IPv4. Sprich du bist bei irgend wo bei 40 CHF pro Jahr für 2 fixe IP's. Gorb sieht es bei mir so aus: So kannst du die IP direkt bei deiner Firewall verwenden, die Sophos bei NetCup läuft pratkisch ohne jegliche eingriffe. Das coole ist bei Sophos das du auf die Subdomain und nicht auf den Port Webserver veröffentlichen kannst, sprich du kannst unraid.deinedoamin.ch auf deinen internen Server weiterleiten wie auch homeautomation.deinedomein.ch welche dann bei einem DNS beide auf die gleiche IP zeigen. Ich kann dir sicher gerne bei der Einrichtung helfen, bei der Sophos UTM ist es halt so das dies eine Firewall für den professionellen Einsatz ist. Hier müsstest du dich sicher ein wenig intensiver mit der Materie auseinander setzen. Aber dafür sind die Möglichkeiten sehr vielfältig. Es gibt sicher auch andere Möglichkeiten, z.B. Schau dich ein wenig um, mit den richtigen Keyworts (DS-Lite, IPv4, Tunnel, vServer) findest du sicher diverse hilfreiche Beiträge. Grüsse YB1898
    1 point
  35. @giganode @saber1 bestreicht mich mit Butter und nennt mich Toast 😅 Ich habe es hinbekommen. Nvram habe ich iMacPro1,1 ausgewählt und dieser hat mir dann auch Werte in Smbios eingetragen. Ausschlaggebender Punkt war allerdings, dass ich mit dem Hackintool den PCI-Namen der Netzwerkkarte auslesen musste und diesen unter "DeviceProperties" eintragen muss. Dort den Key "built-in" mit dem Wert "01" und "DATA" eingeben, Hacki neustarten und jetzt hat die Anmeldung geklappt. Wenn Sie mich morgen nicht abholen, scheinen se auch nichts dagegen zu haben 😁😆
    1 point
  36. Problem konnte mit ein bischen probieren gelöst werden. Die "make_bootable.bat" in einem CMD Fenster welches mit Adminrechten gestartet wurde ausführen und UEFI aktivieren war die Lösung. Im Windows Explorer mit Rechter Maustaste als Admin ausführen funktionerte nicht! Ist ggf. für den einen oder anderen Interessant. Problem gelöst
    1 point
  37. Connect the old disk back, then go to Tools -> New Config -> Retain current configuration: All -> Apply Back in the main page assign the old disk, unassign disk7, you can leave that slot unused or assign a new disk there if you want, remaining disks should already be correctly assigned, check all is well and start the array to begin a parity sync.
    1 point
  38. I upgraded from 6.9.1 to 6.9.2 on both my servers with no problems. In fact I thought the upgrade went faster than normal. Not complaining one bit. You guys are awesome thank you for continue support of Unraid.
    1 point
  39. Not unless you're going to be using SSDs or a SAS expander with more than the 8 devices.
    1 point
  40. p.s. I dont believe in backups that only backup certain parts or exclude certain areas in certain situation but then again something else in other situations and depending on the moon phases etc however well intended. That can create a nightmare of a mess during restores. And if it has to be then please put it in bold large flashing letters on the screen where users set up the actual backup, impossible to miss. False sense of security is way worse than no security. So not like this screen , which suggest all is good and shiny... and p.s. the appdata backup plugin properly backs up all bz* files but now advices in large letters to move to unraid.net plugin , which does not backup bz* files. So another possible trap to fall in without a proper warning but even a worse warning (although surely also well intended).
    1 point
  41. Nein, aber reicht es nicht, wenn du die iGPU in Unraid und Container verwenden kannst? Es kommt natürlich darauf an welche Software du wo laufen lässt. Dann kannst du aber von der iGPU profitieren. Das wird niemals passieren, weil um eine dGPU in einer VM nutzen zu können, darf sie nicht von Unraid verwendet werden. Und wenn sie nicht von Unraid verwendet wird, wird kein Treiber geladen, der die dGPU in den Standby schicken kann. Die einzige Ausnahme hatte spaceinvader in seinem Video mit einer AMD GPU und Unraid im GUI Modus gezeigt: https://forums.unraid.net/topic/103212-stromverbrauch-von-gpus-wenn-vm-aus-ist/ Allerdings nützt das herzlich wenig, da AMD GPUs im Leerlauf noch eine Ecke mehr verbrauchen als Nvidia GPUs. Da spart man am Ende nichts. Leider kann man eine GPU im Betrieb nicht aus dem Slot ziehen. Ansonsten könnte man ja einen physischen Schalter umsetzen ^^ Die Frage, die mir allerdings noch keiner beantwortet hat, ob eine GPU eigentlich schläft, wenn die VM im Standby ist. Ich vermute aber mal nicht. Vielleicht kann man aber automatisch nach dem Beenden einer VM eine andere extrem sparsame VM starten lassen, die die GPU in den Leerlauf schickt?! Das Thema hat noch keiner angefasst, da wir armen Deutschen wohl die einzigen sind, die sich für den Stromverbrauch interessieren
    1 point
  42. PM is a Miner for GPUs -see https://phoenixminer.org/ I would recomend to read about cryptos first. But basically it is possible to mine ETH with a CPU but very much not recomended. Have a look at monero for that purpose. came to this thread to point out that you have to install and start the docker first w/o the extra parameter for nvidia. than the docker will start but give you an error. Edit the docker and add the nvidia parameter => starts up fine. my 1070 does around 28MH/s which can be tweaked by some overclocking & undervolting (to around 30-32) which I have no idea how to do in unRaid.
    1 point
  43. Hi, bitte entschuldige die späte Antwort, war eine harte Arbeitswoche. Der Status des Prozesses war in den beiden oberen Fällen "R". root 18459 100 0.0 2460 760 ? R 21:35 14:28 fuser -s /mnt/cache/backups/urbackup/linux-client/210314-1511/root/home/username/.steam/debian-installation/ubuntu12_32/steam-runtime/i386/selinux Ich habe Dienstagabend jedoch den Server neu gestartet. Da der Mover immer wöchentlich am Montag loslegt, habe ich den Fehler bis jetzt noch nicht reproduzieren können. Seit ich den heute Mittag manuell angestoßen habe, läuft er erstmal ordnungsgemäß durch, braucht allerdings sehr lange. Ich warte jetzt mal die kommenden Tage ab und prüfe, ob/ wann sich der Prozess wieder erhängt. EDIT: Der Prozess hing sich in der Nacht wieder an derselben Datei auf. Ich habe nun auch diese mal gelöscht. Mit etwas Glück, waren es die beiden einzigen Dateien, die Probleme machten. EDIT 2: So scheint es dann auch gewesen zu sein. Der Mover hat als solches im Backup-Ordner zwar sehr sehr langsam gearbeitet, es sind jedoch keine weiteren Dateien aufgetaucht, an denen er sich aufgehangen hat. Damit hat sich das Thema für mich erledigt. Vielen Dank @mgutt für deine Unterstützung
    1 point
  44. Unfortunately I'm also experiencing this issue. Is there any possible fix for this?
    1 point
  45. Ahhh, they're just the library names... so if I wanted the documentary portion to work, I'd have to split out all my documentaries into separate libraries. Got it. Thank you very much for clarifying that. And let me know if I can help at all on the all locations map, though I'm guessing it'd be more difficult to collaborate. Mostly just didn't mean to shove that off on you, thank you for your help though! And thanks to @hogfixer too!
    1 point
  46. You need to edit the query by selecting your proper Plex Library section. If your library section names happen to mach the UUD (mine since I'm the developer) exactly, they will just magically work. So edit the panel, head over to the query, and click the library section tag and select from the auto populated drop own menu. Do this for all fo the N/As and you'll be in business. You can also copy any of these, change the color if you want, pick a different section, and change the name. So you can add things like Stand-Up, UFC, Home Movies, etc. This is just a template. Make it your own... And for the map that shows all locations, that should be possible. I'll see what I can figure out.
    1 point
  47. Am I the only one who can't get the "Documentary Shows" and "Anime Shows" counters working? Not sure how it's pulling this genre information, or if I could change it to pull a different genre, but mine just show N/A: I'd love to get these working and be able to tweak them if possible. Haven't been able to dig up anything on how to do that though. Also, I'd love to add a map that shows all the locations of the IP addresses I've ever streamed to (not just the one's I'm actively streaming to) if possible. Any help is appreciated! This is so cool though, thanks to everyone who put time/effort into it. What a wonderful tool.
    1 point
  48. I would like to see a "back-up" option added to the "use cache disk" option in the Share form. The behaviour would be to leave the data on the cache (like the "only" option) except the mover script would copy the data to the array when it runs. My use case is my app data share for all my dockers. It's cache only now and working great, but I want it backed up to the array (so the pref files are on protected storage). When I asked about doing this, I was told to set up an rsycn cron job; but why does unRAID support moving through the webUI, but not copying? Thoughts?
    1 point
  49. I get that which is why my post was here in Feature Request. As I believe it would be a nice feature to add and make unRaid even more useful. I didn't expect this push back in the Feature Request forum? I get that some features are difficult to implement. I've also been around software developers too and understand sometimes they just say no because they don't see the need. This would also push unRAID up another level. Anyway, thank you for your replies and I will hope this gets serious consideration one day.
    1 point