Leaderboard

Can we get a ban of user barbara1. They’re sending PM’s with spam links. Thanks!

Tons of posts related to Windows 10 and SMB as the root cause of the inability to connect to unRaid that were fruitless so I'm recording this easy fix for my future self. If you cannot access your unRaid shares via DNS name ( \\tower ) and/or via ip address ( \\192.168.x.y ) then try this. These steps do NOT require you to enable SMB 1.0; which is insecure. Directions: Press the Windows key + R shortcut to open the Run command window. Type in gpedit.msc and press OK. Select Computer Configuration -> Administrative Templates -> Network -> Lanman Workstation and double click Enable insecure guest logons and set it to Enabled. Now attempt to access \\tower Related Errors: Windows cannot access \\tower Windows cannot access \\192.168.1.102 You can't access this shared folder because your organization's security policies block unauthenticated guest access. These policies help protect your PC from unsafe or malicious devices on the network.

Hab vergessen: Sollte bedingt auch für deine 6th gen zutreffen.

Du hast wahrscheinlich 4K nach 4K transcodiert oder? Wenn ja, mach das nicht, h264 ist nicht dafür vorgesehen 4K wiederzugeben, natürlich funktioniert es aber h265 ist eigentlich dafür "vorgesehen". Mit den FPS hat das rein gar nichts zu tuhen, hast du denn in Emby Throttling an, solltest du auf jeden fall an machen, auch wenn du weiter Nvidia transcoding nutzt meiner Meinung nach. Probier mal wieviel simultane transcodes du mit der iGPU machen kannst. Wenn die iGPU aktiviert ist einfach im Emby template das Gerät /dev/dri durchreichen, fertig.

We blocked the few accounts that seem to be the source, I do not see new spammer accounts for the moment. We keep monitoring the situation.

Thank you for the feedback, we see all the reports and the moderation team is actively banning the accounts you are reporting.

I definitely agree with this. 5.x kernels don't like my hardware.

Laut rezension 18TB März 2021 ist das eine white label WD180EDFZ

Nov 24 18:28:20 Tower kernel: sd 1:0:4:0: Power-on or device reset occurred That's the start of everything. Disconnected itself. Reboot is the only recourse. You can try a different USB port if problems continue, or alternatively install the Flash Remount plugin. (Not 100% sure if the plugin would have helped here as from that logged line onwards it's a wall of text and hard to see if the flash "reconnected" itself) Honestly, out of all the diagnostics I look at, yours seems to be sending the most amount of emails of the bunch on a twice daily basis.

Also FYI: I updated yesterday from 6.4.?? (whatever the previous stable was) with no issues, too.

Thnx a lot. i have do it in settings that krusader use gedit now.

What happens when you double click a text file or try it with the right click? EDIT: You can set the default editor if you go to Settings -> Configure Krusader -> General -> Viewer/Editor -> type in "gedit" at Editor -> click "Apply":

MinecraftBasicServer, sorry I'm on chromium, I'll cycle through some others now EDIT: It's working on other browsers, maybe it's one of my plugins. Thanks for the help, my fault for not checking

I was able to get an 8TB external HDD from Best Buy, shucked it and slapped it in where Disk 12 lived. It's in the process of a rebuild right now. I got paranoid and wanted to get the disk replaced before anything else failed. Estimated completion is 1 day 2 hours. Is it alright to use the array while the rebuild is progressing, or should I not be using it during the rebuild? I think this has taught me that I need a second parity drive and then another drive just sitting there waiting to go. My critical data is backed up, but my media isn't. It would just be a ton of work to rip all the disks again. It's hard to find a cost effective way to backup 61TB.

Just tried the mover button per share. Worked great. The Amazing thing I was wanting to move some data, but I didn't want to move everything just today. Glad I checked the forum to see this.

Warum nutzt du nicht die Chance und nimmst eine CPU mit iGPU? Unnötige Hürden du dir auferlegst, junger Padawan.

Hier lesen: https://forums.unraid.net/topic/99393-häufig-gestellte-fragen/?do=findComment&comment=1021228 Meine Empfehlung wäre ein ITX Board der 8ten/9ten Intel Generation. https://geizhals.de/?cat=mbp4_1151v2&xf=4400_Mini-ITX&sort=p&hloc=at&hloc=de&v=e https://geizhals.de/gigabyte-c246-v28427.html

Thank you to the wonderful team on the Discord server this has been sorted out! Fix listed below: /boot/config/ident.cfg look for the line "USE_SSL="false" and change it to USE_SSL="no"

i fixed it by using the permissions tool i didnt know i had lol thank you guys sorry for the bother and thanks for a great docker man its fantastic

I upgraded to 6.5.53 two days ago and have had no issues. There was a firmware update for my access points as well and while everything is working the feature "airtime fairness" no longer exists and has not existed for the last 2 firmware revisions with it looking like this is dropped as a feature anymore so if you used that then its gone just fyi if you upgrade your AP's. Its looking like its gone forever. P

For any future users troubleshooting "Swap file in use: X", you may need to update the Swap file location to exclude the trailing slash. Ex: Swap file location: /mnt/cache/swap/ Should instead be -> Swap file location: /mnt/cache/swap

Version 6.10 allows the docker custom network type to be set to ipvlan instead of macvlan. This setting was introduced to try to work around the macvlan call trace issue. For some it has helped. Since I implemented a docker VLAN on my router and switch, the problem has disappeared for me.

Just thought I would comment on this since it shows a misunderstanding of "format". There is no point in formatting a drive before preclearing it since the format would be completely wiped out by the preclear. And if you format a precleared drive, then it is no longer clear since it is formatted. The most important mistake you should avoid is formatting a disk that should have contents on it. You can't rebuild a formatted disk from parity.

Get the Seagate drive tools (google to find the download site) and test the drive in a PC. That will test the drive out in accordance with what Seagate wants to see. (It also gives you leverage if you want to use a vendor exchange policy rather than a warranty exchange.) Two bad drives in a row is not what one wants to be a victim of. If true, it means you could be buying into a bad manufacturing lot...

Looks like a drive problem, it's not even giving a valid SMART report.

Das ITX käme sogar auf 47 Watt: https://www.hardwareluxx.de/index.php/artikel/hardware/mainboards/57484-deep-mini-itx-mit-standard-dimms-asrock-rack-e3c256d4id-2t-im-test.html?start=5 Ist doch nicht normal. Da kann ich ja gleich EPYC nehmen: https://www.servethehome.com/asrock-rack-romed4id-2t-mitx-ish-amd-epyc-motherboard-review/3/

here is what I am using: rclone mount --max-read-ahead 1024k --umask=0 --vfs-cache-mode writes --allow-other dropbox: /mnt/disks/dropbox With 6.10.0-rc2 it appears that the permissions are incorrect on the mounted folders. When the folders are shared (at least with windows machine), you can read the files but you cannot write. Adding --mask=0 solved the issue for me.

Tested the new container today, everything seems to work fine, Thank you, again!

HDDs, for example Seagate BarraCuda Compute 4 or 5TB. Or Seagate SkyHawk (specifically certified for 24/7 operations, 3.5“), the latter has a slightly higher power consumption. 3000G should be ok for your purpose. If you can / want afford a 4 core 35W cpu I‘d pick that. But there are not many options, like Ryzen 5 PRO 2400GE or 5650GE. Alternatively and if your bios allows pick a 65W cpu and set it to 35W through BIOS settings. Drawback is, that you noticeably limit the CPU performance for some use cases such as transcoding. There are also much faster PCIE 4 NVME SSD with low power consumption available like the Kingston KC3000 PCIe 4.0 NVMe SSD 512GB. PCIE 3 NVMEs consume a little bit less, though they a slower. Watch out for SSDs with enough TBW, depending on your use case and expected life span.

Had this today with 6.8.3 I restarted Samba through the Webterminal as follows, which restarts WSDD as well: samba restart Does anyone have mounted SMB Shares (I have)?

(first post here, so please yell at me if I do anything wrong) Unfortunately the various suggestions such as setting up a mount in /etc/fstab were not working for me, as I'm trying to develop software inside this VM, and NFS doesn't play well with various build tools, due to no support for kernel functionality called "inotify" (Facebook's watchman package depends on it). I haven't 100% confirmed any of this, but I think I know what's happening? I at least have a basic understanding of my case? It looks like a brand new Ubuntu 18.04 installation is no longer using /etc/network/interfaces for network config, and is instead using /etc/netplan/50-cloud-init.yaml (I don't know if it's always the same filename). I assume that this is related to the cloud-init stuff that was added to Ubuntu in the recent past, based on the name of the file. For some reason, this is configured correctly before mounting a share. After mounting a share, I found that /etc/netplan/50-cloud-init.yaml had the wrong network interface identifier. I don't know if my network interface identifier changed, or if the contents of this file changed. My network interface is now called enp3s0 so I edited the contents of the file to look like this: network: ethernets: enp3s0: dhcp4: true version: 2 (read more about netplan config at https://netplan.io/examples) And the problem is solved. I believe that the other suggestions in this thread are workarounds, and this technically could be too, since I haven't confirmed which bit changes after mounting the share, or why it happens. If I find more, I will post back! (side note: If Unraid supported EZ VM snapshots, it would be a lot easier to figure this out. As-is, I have to reinstall Ubuntu over and over...)