Leaderboard

Popular Content

Showing content with the highest reputation on 12/11/22 in all areas

  1. Once you have migrated your Unraid system(s) to use the myunraid.net certificate, then DNS Rebinding on the unraid.net domain is no longer a concern. You can remove any special handling of DNS Rebinding for the unraid.net domain from your router.
    2 points
  2. Support thread for masterwishx/browserless playwright-chrome - browserless/chrome docker image. https://hub.docker.com/r/browserless/chrome/ browserless is a web-service that allows for remote clients to connect, drive, and execute headless work; all inside of docker. It offers first-class integrations for puppeteer, playwright, selenium's webdriver, and a slew of handy REST APIs for doing more common work. On top of all that it takes care of other common issues such as missing system-fonts, missing external libraries, and performance improvements. We even handle edge-cases like downloading files, managing sessions, and have a fully-fledged documentation site. If you've been struggling to get Chrome up and running docker, or scaling out your headless workloads, then browserless was built for you. This docker is needed for changedetection.io , you can find it in Ca Apps . its like Distill.io tool . more read here https://github.com/dgtlmoon/changedetection.io/wiki/Fetching-pages-with-WebDriver and here https://github.com/dgtlmoon/changedetection.io/wiki/Playwright-content-fetcher Docker size about 910Mb !!! I'm only made a template for it. https://docs.browserless.io/docs/docker-quickstart.html add this var to after install to your changedetection.io: PLAYWRIGHT_DRIVER_URL=ws://yourIP:yourPORT/?stealth=1&--disable-web-security=true Warning: Please use A75G's repository template for official changedetection.io container from https://hub.docker.com/r/dgtlmoon/changedetection.io . image by linuxserver container does NOT contain Playwright content fetcher .
    1 point
  3. Your quote is for the source not the destination.
    1 point
  4. Thank you! Made those changes and it all works! Bless you!
    1 point
  5. Finally, I solved my problem. The biggest problem is the network problem! Finally, I tried to use my VPN to directly connect to the official Debian source, so that I could quickly and stably install all dependencies without unknown problems. Because after installing the LXCVNC button, everything was determined by the system default, so I could not change the official source halfway, The following is a Chinese literal translation for Chinese compatriots, because I think there are few countries in the world except China that are closed to the Internet 终于,我解决了我的问题, 最大的问题就是网络问题!我最后尝试使用我的VPN直连debian官方源,才保持快速稳定地安装完所有依赖不出现不知名的问题,因为安装LXCVNC的按钮以后,一切都是由系统默认决定的,所以我没法中途改变官方源, 国人请修改软路由或者V2为全局直连外网!
    1 point
  6. I have pushed 1.34.0==1.34 but have not changed latest tag and won't for a while due to usual .0,.1,.2 in quick sucession.
    1 point
  7. Ok,danke für die Infos
    1 point
  8. I would also get printouts (or PDF prints) of many of the various tabs on the Settings tab of the GUI. (If you have them, you will never need them. Murphy's Law does apply here!) Look at all of them to see which you MIGHT have made changes on and print those out. Since you are moving from Intel to AMD, realize that AMD and Unraid have had issues. See here for some things to watch out for: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/page/2/#comment-819173
    1 point
  9. interesting. I will try this and report back. Thank YOU! I appreciate your help.
    1 point
  10. @BlueBull, The short answer is - yes, it can be done(*) (so, essentially, no - I'm not confirming your suspicion 🙂 ). Quite simply in fact. As long as you are passing the drives through (i.e. RDM and not, say, whole-disk virtual drive), the transition to a passed-through HBA is possible, preserving your data. You will need to be careful with the procedure of making the change - let me know if you need guidance, I think there's some past stuff in this subforum - but assuming you do the right thing, you will not need to start fresh. (no issue with UUIDs). (*) Can be done - and I've done exactly that in the past.
    1 point
  11. No idea on dedicated IP, a question for pia, tell them you are not using their app, you are using openvpn/wireguard directly, I suspect they will say you have to use their app to assign a specific IP, in which case you are out of luck. Sent from my 22021211RG using Tapatalk
    1 point
  12. The upgrade worked for me as well. Thank you. I've tried discord in the past but it's simply too distracting and discombobulated. If you don't catch whatever is said right when it's said, you can very easily miss it and never see it, as opposed to a forum like this one where you can easily scroll back and search. Forums tend to stay on topic a lot better as well.
    1 point
  13. Usually newer Mobos use UEFI, so you should check your stick if the folder "EFI-" is already renamed to "EFI". If you attach the old Disks to normal SATA ports on the new board, there should be no problem recognizing them and reactivating the array. But it cannot harm to take a screenshot of the the old disk assignments (which serial number goes where), print it out and have it ready in case something goes wrong and you need to create a new configuration from scratch. Also, a good backup of the flashdrive is not bad too 🙂
    1 point
  14. Everything goes through RAM both ways -- nothing actually ever goes directly from the disk to the CPU, it's always going through RAM. Corrupted segment means something is wrong with the file as it sits on the disk. Parity check passing means that it's written incorrectly on the disk as far as the torrent data is concerned. I'm guessing a bad cable, or bad RAM. I've seen a bad cable give similar issues.
    1 point
  15. Hallo Allerseits. Die Wahl der PCIe basierten SATA Kontroller für unraid (Stand Jan. 2024). Ist zwar schon (sehr) oft durchgekaut worden, aber da immer wieder entsprechende Fragen auftauchen hier einmal ein paar Grundlagen. (Diese spiegeln meine aktuelle Meinung und Erfahrung wieder. Verbesserungsvorschläge willkommen.) Hier incl. PCIe und SATA Grundlagen, damit man hier ggf. drauf verweisen kann und es nicht immer wieder neu tippen muß. Zuerst die übliche Schnisttelle auf dem Mainboard, die diese Kontroller versorgt - PCIe: Zuerst ist es interessant, welchen PCIe Standard das Mainboard bei den zu benutzenden Slots unterstützt, damit man auch abschätzen kann, was ein SATA Kontroller darauf maximal leisten kann: - PCIe 1.0 ist stark veraltet und liefert pro Lane rund 250MByte/s. Das ist nicht zu empfehlen. - PCIe 2.0 ist veraltet und liefert pro Lane rund 500MByte/s. Wenn es nicht anders geht, kann man es nutzen. PCIe SAS-Kontroller mit PCIe 2.0 sind aber oft etwas stromsparender als PCIe 3.0. - PCIe 3.0 ist aktuell (&) gut und liefert pro Lane knapp unter 1Gbyte/s. - PCIe 4.0 oder gar 5.0 sind zu neu. Speziell dafür sind mir aktuell keine SATA Kontroller bekannt. Da PCIe abwärtskompatibel ist, kann man in einem sehr neuen Mainboardslot mit Standard 4.0 oder gar 5.0 dennoch auch Kontroller verwenden, welche beispielsweise nur PCIe 2.0 oder 3.0 beherrschen. Leider ist man dann aber eben auch auf die Geschwindigkeit von PCIe 2.0 oder eben 3.0 pro Lane reduziert. Dafür wird bei der langsamen Taktung oft auch etwas weniger elektrisch Energie benötigt. Dann ist es relevant welche PCIe Steckplätze das Mainboard hat. - Einerseits gibt es die normalen PCIe Slots in verschiedenen Längen und intern unterschiedlich viel belegbaren (elektrisch verbundenen) Lanes. Mechanisch lange Slots (bis x16) können so ausgeführt sein, daß sie elektrisch dennoch nur weniger Lanes verbinden (x1, x4, x8). - Andererseits gibt es seit einiger Zeit M.2 Steckplätze (alt auch NGFF bezeichnet), die entweder selber nur einen einzigen SATA Anschluß bieten oder evtl. (zusätzlich oder exklusiv) den NVMe Standard beherrschen und dadurch auch PCIe Lanes haben. Diese sind mit 1, 2 oder 4 Lanes zu finden. Diese sind mechanisch nicht ganz so robust/stabil, aber mit etwas Vorsicht immer noch gut nutzbar. Nun zu SATA: Der aktuelle SATA-3 Standard kann Datenträger mit bis zu ca. 600MByte/s (6GBit/s) ansprechen. - Große und schnelle Festplatten mit der Drehzahl von ca. 7200 Rpm schaffen heutzutage in der kurzzeitigen Spitze etwas mehr als 280MByte/s von ihrem Scheiben. Im normalen Dauerbetrieb sackt diese Geschwindigkeit über die Festplatte hinweg ab, so daß ich pauschal pro Festplatte von ungefär 250MByte/s ausgehe. - SATA-SSD hingegen schaffen aufgrund ihres Aufbaus in der Spitze durchaus weit höhere Geschwindigkeiten. 550MByte/s sind keine Seltenheit und da kommt man so langsam an die SATA-3 Limitierung ran. Weniger Peformante SATA-SSD sacken nach sehr kurzer Spitze auch gerne schon mal auf 300 MByte/s oder sogar viel weniger ab. Hier nun zu den Kontrollern für SATA-Festplatten und SATA-SSD: Die Kontroller sind in der Regel mit einem (oder mehreren) Chip bestückt, welcher den PCIe Slot (Eingang) nutzt und dann SATA Ports für Festplatten/SSD (Ausgang) bereit stellt. Die Leistungsfähigkeit (und Kompatibilität zu unraid) eines Kontrollers hängt stark von dem verwendeten Chip auf dem Controller ab, weshalb es meist egal ist, wer der Kartenhersteller ist, da dieser meist nur die Funktion des Chips nach außen anbindent. (Deshalb werde ich im weiteren eher von Chiptypen, als von Kontrollerherstellern schreiben). - Einerseits gibt es SATA Kontroller, welche meist nicht so viel Strom verbrauchen, dafür aber auch nur wenige SATA-Anschlüsse (bis 6) haben und passiv gekühlt werden (bei einfachen Chips ist nicht einmal ein Kühlkörper nötig). - Andererseits gibt es SAS Kontroller, welche auch zu SATA kompatibel sind. Diese benötigen mehr elektrische Energie, gibt es aber dafür auch mit hoher SAS/SATA-Portzahl (bis 28). Aufgrund des hohen Stromverbrauches sind bei SAS Kontrollern mindestens Kühlkörper nötig und diverse Hersteller sehen eine zwingende Belüftung mit vorgegebener Luftmenge als notwendig an. Hier sind HBA Kontroller im IT Mode für Unraid in der Regel kompatibel. Raid Kontroller ohne IT Modus sind bei Unraid nicht anzuraten. - Dann gibt es noch eher exotische Lösungen, bei denen verschiedene Chips mit SATA-Multipliern hinter dem eigentlichen SATA Chip oder gar PCIe-Switche dem SATA Chip vogeschaltet sind. (Beide Varianten sind nicht optimal!) Deshalb ganz kurz zu diesen beiden Zusatzkomponenten: - SATA Multiplier sind Verteiler, die die maximalen 600MByte/s eines SATA (Eingangs-)Ports auf bis zu 5 SATA (Ausgangs-)Ports verteilen. Man hat also weitaus mehr Ports gleichzeitig zur Verfügung um Datenträger anzuschließen, aber wenn man alle Datenträger gleichzeitig ansprechen will, teilen sie sie die maximale Bandbreite des einen Ports. Somit schafft man dann pro SATA Port theoretisch maximal ca. 120MByte/s. In der Praxis kommen noch ein paar bremsende Details hinzu. - PCIe-Switche sind vergleichbar mit Netzwerkswitchen. Man hat auch hier einen Eingang (evtl. mit mehr als einer Lane), der versucht die zu transportierenden Datenpakete auf mehrere Ausgänge zu verteilen. Da PCIe weitaus performanter ausgelegt ist und so auch mehrere Eingangslanes gleichzeitig auf verschiedene daran angeschlossene SATA Kontroller mit je einer Lane gesplittet werden können, ist das eine interessante Methode mehrere stromsparende SATA Chips performant an einen breiteren PCIe Slot (beispielsweise mit 4 Lanes) anzubinden. Leider hat die Sache einen großen Haken: die PCIe Switches selber sind auch Stromschlucker und damit macht man die Energiebilanz des nachgeschalteten sparsamen SATA Chips wieder zunichte. Dann kann man gleich überlegen einen SAS Kontroller oder mehrere einfache SATA Kontroller zu nehmen. Und endlich: die SATA Chips auf den Kontrollerkarten (egal ob Standardbauweise oder M.2). Aktuell steht auf dem Markt folgendes zur Verfügung (was auch in unraid gut funktioniert, aber ggf. die vom Mainboard erreichbaren Stromsparzustände (C-States) verändern/verschlechtern kann): ASM1062 Chip – Eingang PCIe 2.0 x2; Somit hat man also rund 1GByte/s Bandbreite (wenn dieser Chip eben zum Mainboard mit mindestens PCIe 2.0 x2 Lanes angebunden ist), die hier auf bis zu 2 SATA Ports verteilt werden. Bei gleichzeitige Nutzung aller 2 Ports sind knapp unter 500MByte/s pro Port nutzbar, wodurch sich dieser Kontroller sich gut anbietet bei älteren PCIe 2.0 basierten Mainboards bis zu 2 SATA Festplatten oder aus SATA-SSD gleichzeitig zu betreiben. Diese Kontroller sind aber auch auf PCIe Steckkarten mit nur einer (x1) Lane Anbindung zu finden. Hier stehen dem Chip also nur maximal rund 500MByte/s zur Verfügung und damit würde es bei 2 guten SATA-SSD gleichzeitig schon wieder zu eng mit der Gesamtbandbreite. JMB582 Chip - Dieser hat baulich 1 eine PCIe 3.0 Lane. Dieser Chip bietet 2 SATA Ports, die sich dann die maximale Bandbreite von rund 1GByte/s teilen, wodurch dann bei gleichzeitiger Nutzung knapp unter 500MByte/s pro SATA Port drin sind. Das reicht auch für gute SATA SSDs. Diese 582 Chips werden sehr gerne für die Nischenlösung der M.2 Key A/E Steckkarte eingesetzt um in solch kurzen A oder E Slots, welche eigentlich für WiFi Karten gedacht sind und auch PCIe 3.0 x1 enthalten, einen zusätzlichen SATA Kontroller einzusetzen. In reinen CNVI M.2 Slots funktionieren diese Kontroller nicht. Nicht unerwähnt sollte sein, daß die JMB 582 (und siehe unten auch 585) kein vernünfitiges ASPM beherrschen und somit der PC in der Regel nicht mehr in tiefere Stromsparmodi wechseln kann. Das kann dann schon einmal einen Unterschied von ein paar Watt im einstelligen Bereich ausmachen. ASM1064 Chip – Eingang PCIe 3.0 x1; Somit hat man also rund 1GByte/s Bandbreite, die hier auf bis zu 4 SATA Ports verteilt werden. Bei gleichzeitige Nutzung aller 4 Ports sind knapp unter 240MByte/s pro Port nutzbar, wodurch sich dieser Kontroller gut anbietet bis zu 4 SATA Festplatten gleichzeitig zu betreiben. Bei performanten SATA-SSD sollten nicht mehr als 2 Stück gleichzeitig benutzt werden, da diese sonst ggf. ausgebremst werden. ASM1164 Chip – Eingang PCIe 3.0 x2; Somit hat man also rund 2GByte/s Bandbreite, die hier auf bis zu 4 SATA Ports verteilt werden. Bei gleichzeitige Nutzung aller 4 Ports sind fast 500MByte/s pro Port nutzbar, wodurch sich dieser Kontroller gut anbietet bis zu 4 SATA-SSD gleichzeitig zu betreiben. Steckkarten mit diesem Kontroller sind aber sehr selten, weil sie preislich vergleichbar dem unten erwähnten ASM1166 liegen und dieser sogar 6 SATA Ports bietet. Auch dieser Kontroller ist vereinzelt auch auf x1 Steckkarten zu finden, wobei er sich von der Geschwindigkeit her dann nicht mehr von der ASM1064 Variante unterscheidet. Nicht unerwähnt sollte sein, daß es für die ASM11.. Chips ein Firmweareupdate gibt, welches bei einigen Zusatzsteckkarten evtl. vorhandene Probleme mit den Energiesparmodi verringern. Ob dieses Firmwareupdate bei allen ASM11.. basierten Steckkarten funktioniert kann ich nicht sagen. JMB585 Chip - Dieser hat baulich 2 Stück PCIe 3.0 Lanes, wodurch man seine maximale Bandbreite nur in einem Slot 3.0 mit x2 Lanes (oder mehr) erreichen kann. Dieser Chip bietet 5 SATA Ports, die sich dann die maximale Bandbreite von rund 2GByte/s teilen, wodurch dann bei gleichzeitiger Nutzung knapp unter 400MByte/s pro SATA Port drin sind. Das ist mehr als die aktuell flotteste SATA HDD schafft und auch nicht übel, wenn man SATA SSD verwenden will. Es wird dann bei gleichzeitiger Nutzung performanter SATA-SSD zwar immer noch etwas Transfergeschwindigkeit beschnitten, aber das muß man selber entscheiden, ob man das akzeptieren kann und ob die SSD soweiso nicht selber schon langsamer ist. Auch hier der Hinweis: daß die JMB 585 (und siehe oben auch 582) kein vernünfitiges ASPM beherrschen und somit der PC in der Regel nicht mehr in tiefere Stromsparmodi wechseln kann. Das kann dann schon einmal einen Unterschied von ein paar Watt im einstelligen Bereich ausmachen. ASM1166 Chip – Auch dieser hat baulich 2 Stück PCIe 3.0 Lanes und somit auch maximal 2GByte/s. Er verteilt dies auf bis zu 6 SATA Ports, wodurch dann bei gleichzeitiger Nutzung rund 330MByte/s drin sind. Immer noch mehr als eine Festplatte und auch bei SATA-SSD für den einen oder anderen User interessant. Wenn man nur 4 Ports beschaltet hat man eigentlich das Selbe wie bei einen ASM1164 Chip (siehe oben) nur eben für ggf. zukünftige Erweiterungen oder Umplanungen 2 SATA Ports mehr. Hier gilt auch der Hinweis zu der Firmware bei Stromsparproblemen. Diverse LSI Chips (des aktuellen Inhabers Broadcom) – Das sind dann die SAS Chips. Hier gibt es sehr viele Varianten. Am verbreitesten sind die Chips, welche PCIe x8 zum Mainboard hin anbinden und daraus 8 oder mehr SAS/SATA-Ports machen. Wie schon geschrieben: im IT Mode sind diese für unraid gut nutzbar, aber aufgrund des höheren Strombedarfes, aktiver Kühlung und zur Verfügung stehender PCIe Slots des Mainboard muß man abschätzen, ob man lieber einen SAS Kontroller mit 4, 8 oder mehr Ports oder einen oder mehrere SATA Kontroller mit jeweils weniger Ports einsetzt um die gesamt gewünschte SATA-Portanzahl zu erreichen. Es gibt solche SAS Kontroller die gerne Spitzenwerte von 20-30Watt erreichen. Die aktive Kühlung ist dabei definitiv zwingend! Kleine Randnotiz zu den Kontrollern, welche PCIe 3.0 x2 verwenden: Es gibt im breiten Markt keine Standard PCIe x2 (mechanisch) Slots. Aus dem Grund sind diese Kontrollerkarten für maximale Performance immer in Slots einzusetzen, welche länger sind/mehr Lanes bieten. Ob man nun wirklich bei einem PCIe x4 Slot eine x2 Karte einsetzen will und somit x2 Lanes unbenutzt bleiben, muß jeder User für sich selber entscheiden. Wenn es um 5-6-SATA Ports geht bevorzuge ich 2 Stück PCIE 3.0 x1 ASM1064 in gesamt 2 PCIe x1 Slots eines Mainboards einzusetzen, als nur einen JMB585 oder ASM1166 zu verwenden, wodurch ein ganzer PCIe x4 (oder mehr) Slot ver(sch)wendet wird. Aber das ist sehr individuell und nur meine persönliche Meinung. Aufgrund der oben erwähnten stromsparenderen Firmware mag man auch einen oder mehrere ASM1166 oder ASM1164 (ggf. sogar nur als x1 Steckkarte) bevorzugen und darauf hoffen, daß sie sich bei dem eigenen Kontroller einspielen läßt und den Kontroller gesamt noch etwas sparsamer macht. Natürlich sollte man dennoch mit bedacht überlegen wieviele SATA Ports man dann belegt und gleichzeitig nutzen wird. An der PCIe Bandbreite der Steckkarte ändert sich nichts.
    1 point
  16. Perfect Jorge. Worked like a charm! :-). Thanks
    1 point
  17. Thank you it worked. Just googled it and found https://en.avm.de/service/knowledge-base/dok/FRITZ-Box-7590-AX/3565_FRITZ-Box-reports-Your-FRITZ-Box-s-DNS-rebind-protection-rejected-your-query-for-reasons-of-security/ Didn't remember that I had to do it before but my router had the old unraid url already entered And I just updated it because of the notice in unraid and didn't read the forum post beforehand. Btw. I could workaround my way to the web interface with a vpn client - just for information if someone has the same issue.
    1 point
  18. I think you can exclude files as well but I haven’t tested that. Honestly I need to revise what I posted though. You can backup the docker image. A backup will be created but you will always get an error because the test fails and from the wording of the error I think that old backups won’t get deleted. I haven’t tested this either though.
    1 point
  19. Is it possible to get 4k resolution using Spice? (3840x2160) Edit- yes!! Edit the XML of your VM and change the video section for your virtual display device. Change vgamem from 16384 to: vgamem='65536' Example: <video> <model type='qxl' ram='131072' vram='65536' vgamem='65536' heads='1' primary='yes'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video>
    1 point
  20. https://www.youtube.com/watch?v=l55GfAwa8RI An interesting talk by Wendell on traditional RAID, ZFS and BTRFS.
    1 point
  21. Hi everyone, sorry for my absence here. I appreciate that it has not been working since 6.11, I will produce a final update to fix the issue at some point but I don't have much time at the moment with other projects and my job. Then I will deprecate it as I no longer have the time to work on this. I won't remove it from the app store as there are plenty of people who still need it's functionality and although i haven't been active here I have been somewhat active on the discord still. I may leave it active until unraid make their official API available. Plus it still works on older unraid versions. The application is open source so others are welcome to make changes as well!
    1 point
  22. I'll wait another couple of weeks. When I was upgrading from 11.2 to 11.3 i couldn't roll back as unraid halted at boot with the same error as I got after the upgrade, even after a full restore, so that is not always a 100% safety net. Lets create a "real stable" branch which is auto generated each time we reach the x.y.10 version! I
    1 point
  23. I wanted to put this out there since coral is very hard to get, and impossible at retail price today. This is my current server CPU usage (not using unRaid yet). i5-8400, 4k cameras x2, and 1080p camera x1, running frigate, home assistant, and a dozen other things. I will eventually get the coral, only because it will save me money in the long run. I used to run blue iris. For my use case I LOVE frigate, and home assistant. Having tried both ways... It is also my opinion that docker/bare metal is much preferred over a vm.
    1 point
  24. Thanks for the tour and all your great videos over the years. I have finally decided to take the plunge into Unraid on my new server build and I'd say it's at least 92.7% your fault I've made the decision to make the jump.
    1 point
  25. I have the same issue with swag/unraid/ATT Fiber/Cloudflare. I believe it is a ATT and Cloudflare issue. When I bypass the domain specificied in cloudflare and directly browse to the https domain site specified in duckdns, it shows the swag webpage. {SOLVED} - To anybody trying this and receiving error 522: make sure your SSL settings in CloudFlare (domain > SSL tab on your left) is set to "full", this is defaulted to "flexible". This fixed the issue.
    1 point
  26. I had the same error. Make sure '/config/database' is owned by abc:users. In Unraid/Docker tab, click ownCloud icon -> Console Run command: ls -l /config If it doesn't say "... abc users ... database", run command: chown abc:users /config/database ..that solved it for me.
    1 point
  27. Thank you very much for that info! I just updated unraid from 6.9.2 to 6.10.2 and could not figure out why at least one CPU core was stuck at 100%! Did check terminal -> top and could only see COMMAND "gunicorn"- which I could not find anything related to unraid with google. And the user was 5050 (and the only process using it, which baffled me). Then I suspected docker (not runninv VMs currently). First test Plex was not successful, but luckily the second try with pgadmin4 did the trick. When stopping the docker the cpu dropped to ~2-7% instead of permanent 40-100% over all 4 cores. Then I checked the community application and found your post- which I find interesting- because I did not have this problem before the update. For anybody reading my post: here is the original pgadmin documentation https://www.pgadmin.org/docs/pgadmin4/latest/container_deployment.html#mapped-files-and-directories After your suggestion with sudo chown -R 5050:5050 pgadmin and starting the docker again, the PID with COMMAND gunicorn and user 5050 did return, but dropped to 0% CPU after a couple of seconds. I assume it tried to access its appdata folder and gut stuck in a loop to try again. Why this did not happen before the unraid os update is beyond me, but not it's fixed. Thanks again 👍
    1 point
  28. 高级视图,额外参数一栏填入 --memory=2g 即是限制最高使用2G内存
    1 point
  29. Hätte ich nicht so viel gequatscht, wäre es auch schneller gegangen, aber ich wollte so viele Informationen wie möglich vermitteln und die 10 Minuten habe ich gerade so unterboten ^^
    1 point
  30. @jbrodriguez My son has decided he doesn't like your app. He was giving me some lip so I threatened to shut off Plex. *Click* Plex Docker was shut off from the comfort of my couch and no more videos for him off the Network. Would it be possible for ControlR to be updated and access the user script plugin so we could run custom user scripts from the app? Maybe even a on/off from within the app settings to connect to them for those who don't use custom user scripts?
    1 point
  31. I have an unmountable BTRFS filesystem disk or pool, what can I do to recover my data? Unlike most other file systems, btrfs fsck (check --repair) should only be used as a last resort. While it's much better in the latest kernels/btrfs-tools, it can still make things worse. So before doing that, these are the steps you should try in this order: Note: if using encryption you need to adjust the path, e.g., instead of /dev/sdX1 it should be /dev/mapper/sdX1 1) Mount filesystem read only (safe to use) Create a temporary mount point, e.g.: mkdir /temp Now attempt to mount the filesystem read-only. v6.9.2 and older use: mount -o usebackuproot,ro /dev/sdX1 /temp v6.10-rc1 and newer use: mount -o rescue=all,ro /dev/sdX1 /temp For a single device: replace X with actual device, don't forget the 1 in the end, e.g., /dev/sdf1 For a pool: replace X with any of the devices from the pool to mount the whole pool (as long as there are no devices missing), don't forget the 1 in the end, e.g., /dev/sdf1, if the normal read only recovery mount doesn't work, e.g., because there's a damaged or missing device you should use instead the option below. v6.9.2 and older use: mount -o degraded,usebackuproot,ro /dev/sdX1 /temp v6.10-rc1 and newer use: mount -o degraded,rescue=all,ro /dev/sdX1 /temp Replace X with any of the remaining pool devices to mount the whole pool, don't forget the 1 in the end, e.g., /dev/sdf1, if all devices are present and it doesn't mount with the first device you tried use the other(s), filesystem on one of them may be more damaged then the other(s). Note that if there are more devices missing than the profile permits for redundancy it may still mount but there will be some data missing, e.g., mounting a 4 device raid1 pool with 2 devices missing will result in missing data. With v6.9.2 and older, these additional options might also help in certain cases (with or without usebackuproot and degraded), with v6.10-rc1 and newer rescue=all already uses all theses options and more. mount -o ro,notreelog,nologreplay /dev/sdX1 /temp If it mounts copy all the data from /x to another destination, like an array disk, you can use Midnight Command (mc on the console/SSH) or your favorite tool, after all data is copied format the device or pool and restore data. 2) BTRFS restore (safe to use) If mounting read-only fails try btrfs restore, it will try to copy all data to another disk, you need to create the destination folder before, e.g., create a folder named restore on disk2 and then: btrfs restore -v /dev/sdX1 /mnt/disk2/restore For a single device: replace X with actual device, don't forget the 1 in the end, e.g., /dev/sdf1 For a pool: replace X with any of the devices from the pool to recover the whole pool, don't forget the 1 in the end, e.g., /dev/sdf1, if it doesn't work with the first device you tried use the other(s). If restoring from an unmountbale array device use mdX, where X is the disk number, e.g. to restore disk3: btrfs restore -v /dev/md3 /mnt/disk2/restore If the restore aborts due an error you can try adding -i to the command to skip errors, e.g.: btrfs restore -vi /dev/sdX1 /mnt/disk2/restore If it works check that restored data is OK, then format the original btrfs device or pool and restore data. 3) BTRFS check --repair (dangerous to use) If all else fails ask for help on the btrfs mailing list or #btrfs on libera.chat, if you don't want to do that and as a last resort you can try check --repair: If it's an array disk first start the array in maintenance mode and use mdX, where X is the disk number, e.g., for disk5: btrfs check --repair /dev/md5 For a cache device (or pool) stop the array and use sdX: btrfs check --repair /dev/sdX1 Replace X with actual device (use cache1 for a pool), don't forget the 1 in the end, e.g., /dev/sdf1
    1 point
  32. Glad all's well. Assuming you have an available SATA port, you may want to consider adding a 2nd parity drive so you'll be better protected against any future failures. The distinct advantage dual parity provides is that if you have a 2nd drive fail while you're rebuilding a drive the rebuild will still complete successfully.
    1 point
  33. As noted above, there are a couple ways to cause the activity light to blink. If the lights on your cages don't blink with activity, but just light up when the drive is rotating (I've seen some cages with this behavior); then spindown all drives; then do a write to disk1. This will cause disk1 and the parity drive to spin up. Then do another spindown; and this time write to disk2. This will cause disk2 and the parity drive to spin up. You can then identify the parity drive. This is, of course, a straightforward way to do it with the system shut down. Simply note the serial # of the drive on the Web GUI (as you clearly know); then simply look at the drives until you find it. By the way, a small Dymo label on each drive is a good idea that will preclude this problem in the future. Either lable them "P", "1", "2", ... -- OR use the last 4 digits of the serial # for the labels (which eliminates any dependencies on which slot they're in, in case you ever change the config. Note, however, that if you plan to use the old parity drive as a data drive, you do not NEED to identify which physical drive it is Just install the 4TB drive you want to use as the new parity drive; then Stop the array and assign it as the parity drive [Note the serial # of the old parity drive]. Then -- after parity has been rebuilt on the new parity drive -- you can assign the old parity drive as a new data drive.
    1 point