joshp

thanks @crenn! works for me

just submitted a PR to the default confs... leaving what worked for me hre anyways ## Version 2021/05/18 # make sure that your dns has a cname set for wikijs # if wikijs is running in bridge mode and the container is named "wikijs", the below config should work as is # if not, replace the line "set $upstream_app wikijs;" with "set $upstream_app <containername>;" # or "set $upstream_app <HOSTIP>;" for host mode, HOSTIP being the IP address of wikijs # in wikijs server settings, under network, fill in "Custom server access URLs" with your domain (ie. "https://wiki.yourdomain.url:443") server { listen 443 ssl; listen [::]:443 ssl; server_name wiki.*; include /config/nginx/ssl.conf; client_max_body_size 0; location / { include /config/nginx/proxy.conf; include /config/nginx/resolver.conf; set $upstream_app wikijs; set $upstream_port 3000; set $upstream_proto http; proxy_pass $upstream_proto://$upstream_app:$upstream_port; proxy_set_header Range $http_range; proxy_set_header If-Range $http_if_range; } }

Thanks, worked for me! @advplyr, you might want to update your readme with this conf, it's much more Swag conformant

I'm unsure what that device is honestly, how would I figure that out? Also, it seems the disk went down again and I didn't reboot. Do you mind taking a look at the new logs @trurl?I think the only non-stock part I have in this is a PCI ATA controller for some of the disks (not enough sata ports on the mobo) tower-diagnostics-20200807-2209.zip

Ahhh makes sense, it was already checked when I exported. I was looking through the diagnostics and and didn't see any personal information, but there were a lot of files and I wanted to make sure I didn't miss anything Anyways, here's the diagnostics, appreciate any input! tower-diagnostics-20200731-2004.zip

@trurl, I can post the zip, is there any sensitive information I should remove?

Hi all, I have a quick question... I hope. I recently had a drive display this message "Device is disabled, contents emulated", and I found this post letting me know I was a Ninny for trying trying the old restart to fix it trick.... Alas, following that post, I rebuilt the drive back into the array and am posting a copy of the SMART diagnostics here to see if anyone sees any warning signs of failure? (also to note, the server was in a hot closet for awhile, out now, so I'm wondering if that caused some bit errors...) Any help much appreciated! Josh smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.56-Unraid] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD80EFAX-68LHPN0 Serial Number: 7SGTL7KC LU WWN Device Id: 5 000cca 252cb2d64 Firmware Version: 83.H0A83 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Aug 1 19:26:20 2020 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 164 (intermediate level without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 93) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 974) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance --S--- 129 129 054 - 112 3 Spin_Up_Time POS--- 166 166 024 - 412 (Average 380) 4 Start_Stop_Count -O--C- 100 100 000 - 392 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 8 Seek_Time_Performance --S--- 128 128 020 - 18 9 Power_On_Hours -O--C- 099 099 000 - 12382 10 Spin_Retry_Count -O--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 388 22 Helium_Level PO---K 100 100 025 - 100 192 Power-Off_Retract_Count -O--CK 088 088 000 - 14782 193 Load_Cycle_Count -O--C- 088 088 000 - 14782 194 Temperature_Celsius -O---- 151 151 000 - 43 (Min/Max 17/63) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 255 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 5501 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ Non-Data log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL,SL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 256 Current Device Internal Status Data log 0x25 GPL R/O 256 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 43 Celsius Power Cycle Min/Max Temperature: 40/47 Celsius Lifetime Min/Max Temperature: 17/63 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/65 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (86) Index Estimated Time Temperature Celsius 87 2020-08-01 17:19 46 *************************** ... ..( 34 skipped). .. *************************** 122 2020-08-01 17:54 46 *************************** 123 2020-08-01 17:55 47 **************************** 124 2020-08-01 17:56 46 *************************** 125 2020-08-01 17:57 47 **************************** 126 2020-08-01 17:58 46 *************************** 127 2020-08-01 17:59 46 *************************** 0 2020-08-01 18:00 46 *************************** 1 2020-08-01 18:01 47 **************************** 2 2020-08-01 18:02 46 *************************** 3 2020-08-01 18:03 47 **************************** 4 2020-08-01 18:04 46 *************************** ... ..( 2 skipped). .. *************************** 7 2020-08-01 18:07 46 *************************** 8 2020-08-01 18:08 47 **************************** ... ..( 3 skipped). .. **************************** 12 2020-08-01 18:12 47 **************************** 13 2020-08-01 18:13 46 *************************** ... ..( 10 skipped). .. *************************** 24 2020-08-01 18:24 46 *************************** 25 2020-08-01 18:25 45 ************************** ... ..( 6 skipped). .. ************************** 32 2020-08-01 18:32 45 ************************** 33 2020-08-01 18:33 44 ************************* ... ..( 20 skipped). .. ************************* 54 2020-08-01 18:54 44 ************************* 55 2020-08-01 18:55 43 ************************ ... ..( 29 skipped). .. ************************ 85 2020-08-01 19:25 43 ************************ 86 2020-08-01 19:26 46 *************************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 388 --- Lifetime Power-On Resets 0x01 0x010 4 12382 --- Power-on Hours 0x01 0x018 6 52697857263 --- Logical Sectors Written 0x01 0x020 6 41209799 --- Number of Write Commands 0x01 0x028 6 664464018298 --- Logical Sectors Read 0x01 0x030 6 1123841560 --- Number of Read Commands 0x01 0x038 6 44575781150 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 10337 --- Spindle Motor Power-on Hours 0x03 0x010 4 10337 --- Head Flying Hours 0x03 0x018 4 14782 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 4736356 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 43 --- Current Temperature 0x05 0x010 1 44 N-- Average Short Term Temperature 0x05 0x018 1 44 N-- Average Long Term Temperature 0x05 0x020 1 63 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x030 1 59 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 57 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 65 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 5 --- Number of Hardware Resets 0x06 0x010 4 1 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0xff ===== = = === == Vendor Specific Statistics (rev 1) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS

I know this is a resurrection, but having the same problem above, any solution @p_jas?