Naldinho

This one https://forum.deluge-torrent.org/viewtopic.php?f=9&t=47243 I tried just another plugin that I am not interested in and also same issue.

I can't install plugins -- I searched for an answer but have not found one. When I try to select the egg file I get [Object FileList] When I try to install the plugin by just copying the egg file to the plugin directory that also doesn't install it In NerdPack I've turned on all the Python options The plugin I am trying to install is AutoRemovePlus which is 2.0 compatiable. Any idea what the issue is?

The lack of any error message related to bad paths led me to put Sonarr aside and attempt to deploy Radarr -- using the exact same path settings as well as program settings Radarr works perfectly. I think that would rule out an issue with paths. Does anyone have any insight into what else could possibly be causing Sonarr to fail to know the torrent is finished and ready to move? I've checked the logs for both errors and warnings and there are no errors and the warnings none are relevant to this.

The second screenshot is from Deluge I have changed things a few times since then but at that time the Deluge setting for Completed was set to /downloads which I has mapped to /mnt/user/Downloads/completed/ and in Sonarr I mapped /downloads to /mnt/user/Downloads/completed/ so my understanding is Deluge would tell Sonarr the file is downloaded and in /downloads and then Sonarr would go to the same place

I believe I had already tried that and it didn't work for me. I think that is what I have setup here In your post, you mention that there would be an error with the word "import" in the error but I am not finding that in the Sonarr logs. Is that significant? I have Drone disabled but if I was to enable it then everything works fine so it is not a permissions issue.

I thought I had a basic understanding of it but apparently not given how I am struggling with this. I am under the impression that my goal is to get both mappings to match which they do in the above configuration. Completed downloads are put in /downloads by Deluge which is mapped to /mnt/user/Downloads/completed/ in Deluge and in Sonnar /downloads is also mapped to /mnt/user/Downloads/completed/ No back up and cache SSD stopped working. I think all the configurations were on the cache drive so when it died they were gone.

Help with paths. I had my system working fine but now that I was required to start over I can't get the configuration to work. I've been trying since yesterday -- tried googling and keep finding things I think will resolve the issue but it doesn't. Hoping someone will be nice enough to help me. Everything works up to the point where Deluge doesn't signal back to Sonarr that the torrent is finished and ready to move. Obviously, there is something that I am not getting and I've tried a dozen variations and none of them work for me.

Thank you. Problem solved. It was an issue with OpenVPN files

I've been using this docker for some time with no issues but now it has stopped working on both my unRaid machines. I removed the docker and installed it again and no luck. I've left everything as the default values except for PIA username and password obviously, added LAN_NETWORK 10.1.1.0/24, and changed the path. I also added the opvn file and crt file downloaded from PIA. I choose the strong option if that makes a difference. I can't access the WebGUI. I get a connection refused error. The last line in the supervisord.log is 2018-05-24 08:50:35,675 DEBG 'start-script' stdout output: [info] OpenVPN started

On the second network, I have managed to get PiHole working but Dashboard and Query Log show no data -- all the settings are identical to the one that is working properly except under status in the top left Load is red on the one having issues. The unRaid server should not be under any high load.

Installed the docker on two networks -- worked great on one / shut off all DNS on the other. Going to try again on the second network but in the meantime, I have a few questions. 1) When I go to http://192.168.2.25/Docker it takes a long time and then I get not available in red for the version of all the dockers I have installed. The dockers also don't have icons -- instead just circles with white question marks. Am I supposed to whitelist something for Dockers to work properly? When I check the dashboard nothing is being blocked. 2) When I started reading this topic in the first few pages there was mention of running a script every night to clear out the logs -- is that still necessary or can log length now be set inside the docker?

Thank you. So it is normal and I should just try to get more air circulation around the cache drive.

I have the docker working but I've noticed that from time to time by CPU use will spike up to over 70% on all cores and the cache SSD will start flashing HOT. When I shut down the Plex Server docker it stops so I assume it is related to Plex. This happens when when I am not streaming or watching anything as well as sometimes when I am watching something. Is this normal or have I set something up wrong?

You change it within the webui as admin... I've uploaded files >1GB with no problems Thanks. After reading the manual I didn't even think to check the settings as it seemed to imply it was not a NextButt setting but a underlying environment setting. I set mine to 2GB -- I know you've only tested 1.5GB but is there any reason larger files shouldn't work? I said I'd tested >1GB, I think I've even uploaded about 8GB files.... Thanks. My bad. The 1.5 was from a post early in the topic. I was reading though it and got confused.

You change it within the webui as admin... I've uploaded files >1GB with no problems Thanks. After reading the manual I didn't even think to check the settings as it seemed to imply it was not a NextCloud setting but a underlying environment setting. I set mine to 2GB -- I know you've only tested 1.5GB but is there any reason larger files shouldn't work?

How would one modify the docker to all for file uploads greater than 2 megs? The manual seems to imply that the limitation is because of the serving environment and that you need to make changes to PHP settings but I have no idea how to do that within a docker.

I use a Chrome addon called Remote Torrent Adder -- works great for me.

I suspect it's a threading issue, I've seen similar behaviour when manipulating multiple items. Does the connection restore itself after waiting a bit? There is an alert popup and then when I dismiss it Deluge is just the framework but otherwise blank. I've never waited to see if it populates but if I press reload after a small wait I get everything like normal. I've also noticed that when a torrent finishes all the other torrents stop downloading for about the amount of time it would take to move a file from the downloading directory to the completed directory. The downloading / seeding then returns to normal.

I'm having a lost connection issue when removing torrents that are complete manually -- If I choose a multiple complete torrents and then remove torrent I lose connection to the docker. Is there some setting that I should be changing to prevent this from happening?

Thanks

Question about Postgresql The description says "for use with gitlab. Install this docker before installing the gitlab docker." I'd like to use it for something else. Is this a general Postgresql docker or is it limited to being used only for gitlab?

This is what unRaid auto generates <vcpu placement='static'>10</vcpu> <cputune> <vcpupin vcpu='0' cpuset='11'/> <vcpupin vcpu='1' cpuset='12'/> <vcpupin vcpu='2' cpuset='13'/> <vcpupin vcpu='3' cpuset='14'/> <vcpupin vcpu='4' cpuset='15'/> <vcpupin vcpu='5' cpuset='27'/> <vcpupin vcpu='6' cpuset='28'/> <vcpupin vcpu='7' cpuset='29'/> <vcpupin vcpu='8' cpuset='30'/> <vcpupin vcpu='9' cpuset='31'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-i440fx-2.3'>hvm</type> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='5' threads='2'/> </cpu> but I think it needs to be changed. Before I do so would like confirmation as I have been having terrible luck with stuff breaking recently. I'd like to add <emulatorpin cpuset='0,16'/> and change topology to <topology sockets='1' cores='10' threads='1'/> Is that correct?

I'm a noob myself but since no one has responded in a few days I'll do my best. 1) You can pass-through any USB device plugged in to a port but the device will not be hot-swapable. 2) You can pass-through an entire controller in which case the USB ports will function like normal USB ports on the VM. If your motherboard has two controllers then you can pass-through the one that the unRaid USB is not on -- there is a topic explaining how to do this. The whole thing seemed much more complicated than just passing-through an entire card so I went with that which is what this topic addresses. 3) There is a plugin (haven't tested it yet but people like it) that allows you to make individual USB ports hot-swapable, Anyway that is the best I can offer -- I think it is correct but I'm pretty new at this myself.

If you have hardware that supports it you can bind the ports -- that way not only the docker but everything would be able to take advantage of the ports. You need a router that will supports 802.3ad Link Aggregation which most consumer routers don't but I have an entry level Cisco business router that does. The alternative would be to pass-through a port specifically for the docker. How to do that is beyond my ability so I can't help you but there are topics on how to pass-through other devices to a docker so I believe it should be possible. The process should be the same regardless of what device you are trying to pass so if you search for some of the topics on how to pass a USB port to a docker it should get you started.

Actually it is passing though the USB card but only USB 3.0 devices -- any other USB devices don't work.