TacosWillEatUs

Hi there, I'm moving my Unraid build to a new chassis to support more HDDs, replacing the LSI card from 8i to 16i, and swapping the existing RTX 2070 for a 2080Ti that I have left over from upgrading my gaming PC. The full build is below The build is the following: Motherboard: Asus Crosshair VIII Hero Wifi CPU: AMD 3950X Cooler: Noctua NH-D15 (may eventually go to an aio) Ram: 4x16gb 3600 CL16 GPU: Asus Strix 2080ti Case: Fractal Define 7 XL HBA: LSI 9300-16i Fans: 4x 140mm case + 2x 140mm on D15, maybe some more later HDDs: Eventually 16x 14TB-20TB 7200rpm (Exos or WD Red Pros) + 2x 1TB Sata SSDs, maybe 1 or 2 NVME in the future The current power supply is a Corsair HX750 Platinum, which was fine for the 10 8tb 5400rpm wd reds and 2070. But with more drives + eventually all 7200rpm and the 2080ti, I think 750w might not be enough anymore. I have a spare Corsair RM1000i Gold psu that I was thinking may be better suited to handle the increased load, but I wanted to get some opinions on that. Would be a downgrade in the rating but I think the extra watts will likely be needed for startup or heavy loads on VMs. Thanks

[gdrive] type = drive scope = drive service_account_file = /mnt/user/appdata/google/accounts/sa_gdrive_upload1.json team_drive = XXXXXXXX root_folder_id = I swear I looked over this multiple times, and it just occurred to me that within the main post that comparing to the service account layout, I'm missing server_side_across_configs = true, and I have a 'root_folder_id = ', which may also not need to be there. I'll adjust the config and see if that sorts it out

That's the weird thing, when I run the mount script, I don't see any errors. Within google_local and google_merged, there are the directories that are supposed to be created (There is also a gdrive folder which shouldn't be there, like mnt/user/google_merged/gdrive/gdrive, but that's not a huge issue for now). google_remote has directories cache and gdrive, but when I try to access the gdrive directory, I get errors. Through windows explorer (this user has read write perms on the share), I get 'Windows can't access ....', through winscp logged in as root I get general failure error code 4, and if I try to cd or ls the /mnt/user/google_remote/gdrive, I get the error 'Transport endpoint is not connected' If I mount the same rclone settings (nothing changed) using 'rclone mount --max-read-ahead 1024k --allow-other gdrive: /mnt/user/rclone/google &', it mounts normally without any issues and I can access all the files on the drive (This is just run by itself, not within the mergerfs mount script). Clearly something seems to be going wrong with the mount within the script, but I'm not sure what or how to troubleshoot that. Edit: I did some tests by running the mount alone within another script with all the same arguments and removing the variables and just hard coded them. It mounts fine there, and when the hardcoded mount is put into the main mount script, it also works before the mergerfs stuff happens. Once that happens, then I get all the errors that I posted about above. At a loss for what the issue could possibly be tbh.

I've posted the two scripts below, the only changes I made were to match up with different share names and a small change to the folders created within the mounts. When I run the mount script, it mounts everything without any errors (as far as I can tell at least), but if I go into google_remote, there are no folders within the gdrive folder, from my understanding, it should have the folders that on the drive there, no? The google_merged has the folders that I wanted it to create (4k, 1080p and tv), but nothing else. I can add a file to /google_merged/gdrive/1080p and it shows up within google_local/gdrive/1080p. But once I run the upload script, it uploads to the drive within 1080p but directories get deleted in google_local which removes them from google_merged as well. I'm assuming google_remote should have the directories still which should show up in google_merged but because google_remote is empty, google_merged ends up being empty after the upload. By losing access to the file, I mean that none of the files on the google drive seem to be accessible. Not sure if I made a mistake somewhere or what. Appreciate any help, thanks. Mount script: #!/bin/bash ###################### #### Mount Script #### ###################### ## Version 0.96.9.3 ## ###################### ####### EDIT ONLY THESE SETTINGS ####### # INSTRUCTIONS # 1. Change the name of the rclone remote and shares to match your setup # 2. NOTE: enter RcloneRemoteName WITHOUT ':' # 3. Optional: include custom command and bind mount settings # 4. Optional: include extra folders in mergerfs mount # REQUIRED SETTINGS RcloneRemoteName="gdrive" # Name of rclone remote mount WITHOUT ':'. NOTE: Choose your encrypted remote for sensitive data RcloneMountShare="/mnt/user/google_remote" # where your rclone remote will be located without trailing slash e.g. /mnt/user/mount_rclone RcloneMountDirCacheTime="720h" # rclone dir cache time LocalFilesShare="/mnt/user/google_local" # location of the local files and MountFolders you want to upload without trailing slash to rclone e.g. /mnt/user/local. Enter 'ignore' to disable RcloneCacheShare="/mnt/user0/google_remote" # location of rclone cache files without trailing slash e.g. /mnt/user0/mount_rclone RcloneCacheMaxSize="400G" # Maximum size of rclone cache RcloneCacheMaxAge="336h" # Maximum age of cache files MergerfsMountShare="/mnt/user/google_merged" # location without trailing slash e.g. /mnt/user/mount_mergerfs. Enter 'ignore' to disable DockerStart="nzbget plexx sonarrx radarrx ombi" # list of dockers, separated by space, to start once mergerfs mount verified. Remember to disable AUTOSTART for dockers added in docker settings page MountFolders=\{"downloads/complete,downloads/torrents,4k,1080p,tv"\} # comma separated list of folders to create within the mount # Note: Again - remember to NOT use ':' in your remote name above # OPTIONAL SETTINGS # Add extra paths to mergerfs mount in addition to LocalFilesShare LocalFilesShare2="ignore" # without trailing slash e.g. /mnt/user/other__remote_mount/or_other_local_folder. Enter 'ignore' to disable LocalFilesShare3="ignore" LocalFilesShare4="ignore" # Add extra commands or filters Command1="--rc" Command2="" Command3="" Command4="" Command5="" Command6="" Command7="" Command8="" CreateBindMount="N" # Y/N. Choose whether to bind traffic to a particular network adapter RCloneMountIP="192.168.1.252" # My unraid IP is 172.30.12.2 so I create another similar IP address NetworkAdapter="eth0" # choose your network adapter. eth0 recommended VirtualIPNumber="2" # creates eth0:x e.g. eth0:1. I create a unique virtual IP addresses for each mount & upload so I can monitor and traffic shape for each of them ####### END SETTINGS ####### ############################################################################### ##### DO NOT EDIT ANYTHING BELOW UNLESS YOU KNOW WHAT YOU ARE DOING ####### ############################################################################### ####### Preparing mount location variables ####### RcloneMountLocation="$RcloneMountShare/$RcloneRemoteName" # Location for rclone mount LocalFilesLocation="$LocalFilesShare/$RcloneRemoteName" # Location for local files to be merged with rclone mount MergerFSMountLocation="$MergerfsMountShare/$RcloneRemoteName" # Rclone data folder location ####### create directories for rclone mount and mergerfs mounts ####### mkdir -p /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName # for script files mkdir -p $RcloneCacheShare/cache/$RcloneRemoteName # for cache files if [[ $LocalFilesShare == 'ignore' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Not creating local folders as requested." LocalFilesLocation="/tmp/$RcloneRemoteName" eval mkdir -p $LocalFilesLocation else echo "$(date "+%d.%m.%Y %T") INFO: Creating local folders." eval mkdir -p $LocalFilesLocation/"$MountFolders" fi mkdir -p $RcloneMountLocation if [[ $MergerfsMountShare == 'ignore' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Not creating MergerFS folders as requested." else echo "$(date "+%d.%m.%Y %T") INFO: Creating MergerFS folders." mkdir -p $MergerFSMountLocation fi ####### Check if script is already running ####### echo "$(date "+%d.%m.%Y %T") INFO: *** Starting mount of remote ${RcloneRemoteName}" echo "$(date "+%d.%m.%Y %T") INFO: Checking if this script is already running." if [[ -f "/mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Exiting script as already running." exit else echo "$(date "+%d.%m.%Y %T") INFO: Script not running - proceeding." touch /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running fi ####### Checking have connectivity ####### echo "$(date "+%d.%m.%Y %T") INFO: *** Checking if online" ping -q -c2 google.com > /dev/null # -q quiet, -c number of pings to perform if [ $? -eq 0 ]; then # ping returns exit status 0 if successful echo "$(date "+%d.%m.%Y %T") PASSED: *** Internet online" else echo "$(date "+%d.%m.%Y %T") FAIL: *** No connectivity. Will try again on next run" rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running exit fi ####### Create Rclone Mount ####### # Check If Rclone Mount Already Created if [[ -f "$RcloneMountLocation/mountcheck" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Success ${RcloneRemoteName} remote is already mounted." else echo "$(date "+%d.%m.%Y %T") INFO: Mount not running. Will now mount ${RcloneRemoteName} remote." # Creating mountcheck file in case it doesn't already exist echo "$(date "+%d.%m.%Y %T") INFO: Recreating mountcheck file for ${RcloneRemoteName} remote." touch mountcheck rclone copy mountcheck $RcloneRemoteName: -vv --no-traverse # Check bind option if [[ $CreateBindMount == 'Y' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: *** Checking if IP address ${RCloneMountIP} already created for remote ${RcloneRemoteName}" ping -q -c2 $RCloneMountIP > /dev/null # -q quiet, -c number of pings to perform if [ $? -eq 0 ]; then # ping returns exit status 0 if successful echo "$(date "+%d.%m.%Y %T") INFO: *** IP address ${RCloneMountIP} already created for remote ${RcloneRemoteName}" else echo "$(date "+%d.%m.%Y %T") INFO: *** Creating IP address ${RCloneMountIP} for remote ${RcloneRemoteName}" ip addr add $RCloneMountIP/24 dev $NetworkAdapter label $NetworkAdapter:$VirtualIPNumber fi echo "$(date "+%d.%m.%Y %T") INFO: *** Created bind mount ${RCloneMountIP} for remote ${RcloneRemoteName}" else RCloneMountIP="" echo "$(date "+%d.%m.%Y %T") INFO: *** Creating mount for remote ${RcloneRemoteName}" fi # create rclone mount rclone mount \ $Command1 $Command2 $Command3 $Command4 $Command5 $Command6 $Command7 $Command8 \ --allow-other \ --umask 000 \ --dir-cache-time $RcloneMountDirCacheTime \ --attr-timeout $RcloneMountDirCacheTime \ --log-level INFO \ --poll-interval 10s \ --cache-dir=$RcloneCacheShare/cache/$RcloneRemoteName \ --drive-pacer-min-sleep 10ms \ --drive-pacer-burst 1000 \ --vfs-cache-mode full \ --vfs-cache-max-size $RcloneCacheMaxSize \ --vfs-cache-max-age $RcloneCacheMaxAge \ --vfs-read-ahead 1G \ --bind=$RCloneMountIP \ $RcloneRemoteName: $RcloneMountLocation & # Check if Mount Successful echo "$(date "+%d.%m.%Y %T") INFO: sleeping for 5 seconds" # slight pause to give mount time to finalise sleep 5 echo "$(date "+%d.%m.%Y %T") INFO: continuing..." if [[ -f "$RcloneMountLocation/mountcheck" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Successful mount of ${RcloneRemoteName} mount." else echo "$(date "+%d.%m.%Y %T") CRITICAL: ${RcloneRemoteName} mount failed - please check for problems. Stopping dockers" docker stop $DockerStart rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running exit fi fi ####### Start MergerFS Mount ####### if [[ $MergerfsMountShare == 'ignore' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Not creating mergerfs mount as requested." else if [[ -f "$MergerFSMountLocation/mountcheck" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Check successful, ${RcloneRemoteName} mergerfs mount in place." else # check if mergerfs already installed if [[ -f "/bin/mergerfs" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs already installed, proceeding to create mergerfs mount" else # Build mergerfs binary echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs not installed - installing now." mkdir -p /mnt/user/appdata/other/rclone/mergerfs docker run -v /mnt/user/appdata/other/rclone/mergerfs:/build --rm trapexit/mergerfs-static-build mv /mnt/user/appdata/other/rclone/mergerfs/mergerfs /bin # check if mergerfs install successful echo "$(date "+%d.%m.%Y %T") INFO: *sleeping for 5 seconds" sleep 5 if [[ -f "/bin/mergerfs" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs installed successfully, proceeding to create mergerfs mount." else echo "$(date "+%d.%m.%Y %T") ERROR: Mergerfs not installed successfully. Please check for errors. Exiting." rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running exit fi fi # Create mergerfs mount echo "$(date "+%d.%m.%Y %T") INFO: Creating ${RcloneRemoteName} mergerfs mount." # Extra Mergerfs folders if [[ $LocalFilesShare2 != 'ignore' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare2} to ${RcloneRemoteName} mergerfs mount." LocalFilesShare2=":$LocalFilesShare2" else LocalFilesShare2="" fi if [[ $LocalFilesShare3 != 'ignore' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare3} to ${RcloneRemoteName} mergerfs mount." LocalFilesShare3=":$LocalFilesShare3" else LocalFilesShare3="" fi if [[ $LocalFilesShare4 != 'ignore' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare4} to ${RcloneRemoteName} mergerfs mount." LocalFilesShare4=":$LocalFilesShare4" else LocalFilesShare4="" fi # make sure mergerfs mount point is empty mv $MergerFSMountLocation $LocalFilesLocation mkdir -p $MergerFSMountLocation # mergerfs mount command mergerfs $LocalFilesLocation:$RcloneMountLocation$LocalFilesShare2$LocalFilesShare3$LocalFilesShare4 $MergerFSMountLocation -o rw,async_read=false,use_ino,allow_other,func.getattr=newest,category.action=all,category.create=ff,cache.files=partial,dropcacheonclose=true # check if mergerfs mount successful echo "$(date "+%d.%m.%Y %T") INFO: Checking if ${RcloneRemoteName} mergerfs mount created." if [[ -f "$MergerFSMountLocation/mountcheck" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Check successful, ${RcloneRemoteName} mergerfs mount created." else echo "$(date "+%d.%m.%Y %T") CRITICAL: ${RcloneRemoteName} mergerfs mount failed. Stopping dockers." docker stop $DockerStart rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running exit fi fi fi ####### Starting Dockers That Need Mergerfs Mount To Work Properly ####### # only start dockers once if [[ -f "/mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/dockers_started" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: dockers already started." else # Check CA Appdata plugin not backing up or restoring if [ -f "/tmp/ca.backup2/tempFiles/backupInProgress" ] || [ -f "/tmp/ca.backup2/tempFiles/restoreInProgress" ] ; then echo "$(date "+%d.%m.%Y %T") INFO: Appdata Backup plugin running - not starting dockers." else touch /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/dockers_started echo "$(date "+%d.%m.%Y %T") INFO: Starting dockers." docker start $DockerStart fi fi rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running echo "$(date "+%d.%m.%Y %T") INFO: Script complete" exit Upload script: #!/bin/bash ###################### ### Upload Script #### ###################### ### Version 0.95.5 ### ###################### ####### EDIT ONLY THESE SETTINGS ####### # INSTRUCTIONS # 1. Edit the settings below to match your setup # 2. NOTE: enter RcloneRemoteName WITHOUT ':' # 3. Optional: Add additional commands or filters # 4. Optional: Use bind mount settings for potential traffic shaping/monitoring # 5. Optional: Use service accounts in your upload remote # 6. Optional: Use backup directory for rclone sync jobs # REQUIRED SETTINGS RcloneCommand="move" # choose your rclone command e.g. move, copy, sync RcloneRemoteName="gdrive" # Name of rclone remote mount WITHOUT ':'. RcloneUploadRemoteName="gdrive" # If you have a second remote created for uploads put it here. Otherwise use the same remote as RcloneRemoteName. LocalFilesShare="/mnt/user/google_local" # location of the local files without trailing slash you want to rclone to use RcloneMountShare="/mnt/user/google_remote" # where your rclone mount is located without trailing slash e.g. /mnt/user/mount_rclone MinimumAge="15m" # sync files suffix ms|s|m|h|d|w|M|y ModSort="ascending" # "ascending" oldest files first, "descending" newest files first # Note: Again - remember to NOT use ':' in your remote name above # Bandwidth limits: specify the desired bandwidth in kBytes/s, or use a suffix b|k|M|G. Or 'off' or '0' for unlimited. The script uses --drive-stop-on-upload-limit which stops the script if the 750GB/day limit is achieved, so you no longer have to slow 'trickle' your files all day if you don't want to e.g. could just do an unlimited job overnight. BWLimit1Time="01:00" BWLimit1="off" BWLimit2Time="08:00" BWLimit2="15M" BWLimit3Time="16:00" BWLimit3="12M" # OPTIONAL SETTINGS # Add name to upload job JobName="_daily_upload" # Adds custom string to end of checker file. Useful if you're running multiple jobs against the same remote. # Add extra commands or filters Command1="--exclude downloads/**" Command2="" Command3="" Command4="" Command5="" Command6="" Command7="" Command8="" # Bind the mount to an IP address CreateBindMount="N" # Y/N. Choose whether or not to bind traffic to a network adapter. RCloneMountIP="192.168.1.253" # Choose IP to bind upload to. NetworkAdapter="eth0" # choose your network adapter. eth0 recommended. VirtualIPNumber="1" # creates eth0:x e.g. eth0:1. # Use Service Accounts. Instructions: https://github.com/xyou365/AutoRclone UseServiceAccountUpload="N" # Y/N. Choose whether to use Service Accounts. ServiceAccountDirectory="/mnt/user/appdata/other/rclone/service_accounts" # Path to your Service Account's .json files. ServiceAccountFile="sa_gdrive_upload" # Enter characters before counter in your json files e.g. for sa_gdrive_upload1.json -->sa_gdrive_upload100.json, enter "sa_gdrive_upload". CountServiceAccounts="15" # Integer number of service accounts to use. # Is this a backup job BackupJob="N" # Y/N. Syncs or Copies files from LocalFilesLocation to BackupRemoteLocation, rather than moving from LocalFilesLocation/RcloneRemoteName BackupRemoteLocation="backup" # choose location on mount for deleted sync files BackupRemoteDeletedLocation="backup_deleted" # choose location on mount for deleted sync files BackupRetention="90d" # How long to keep deleted sync files suffix ms|s|m|h|d|w|M|y ####### END SETTINGS ####### ############################################################################### ##### DO NOT EDIT BELOW THIS LINE UNLESS YOU KNOW WHAT YOU ARE DOING ##### ############################################################################### ####### Preparing mount location variables ####### if [[ $BackupJob == 'Y' ]]; then LocalFilesLocation="$LocalFilesShare" echo "$(date "+%d.%m.%Y %T") INFO: *** Backup selected. Files will be copied or synced from ${LocalFilesLocation} for ${RcloneUploadRemoteName} ***" else LocalFilesLocation="$LocalFilesShare/$RcloneRemoteName" echo "$(date "+%d.%m.%Y %T") INFO: *** Rclone move selected. Files will be moved from ${LocalFilesLocation} for ${RcloneUploadRemoteName} ***" fi RcloneMountLocation="$RcloneMountShare/$RcloneRemoteName" # Location of rclone mount ####### create directory for script files ####### mkdir -p /mnt/user/appdata/other/rclone/remotes/$RcloneUploadRemoteName #for script files ####### Check if script already running ########## echo "$(date "+%d.%m.%Y %T") INFO: *** Starting rclone_upload script for ${RcloneUploadRemoteName} ***" if [[ -f "/mnt/user/appdata/other/rclone/remotes/$RcloneUploadRemoteName/upload_running$JobName" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Exiting as script already running." exit else echo "$(date "+%d.%m.%Y %T") INFO: Script not running - proceeding." touch /mnt/user/appdata/other/rclone/remotes/$RcloneUploadRemoteName/upload_running$JobName fi ####### check if rclone installed ########## echo "$(date "+%d.%m.%Y %T") INFO: Checking if rclone installed successfully." if [[ -f "$RcloneMountLocation/mountcheck" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: rclone installed successfully - proceeding with upload." else echo "$(date "+%d.%m.%Y %T") INFO: rclone not installed - will try again later." rm /mnt/user/appdata/other/rclone/remotes/$RcloneUploadRemoteName/upload_running$JobName exit fi ####### Rotating serviceaccount.json file if using Service Accounts ####### if [[ $UseServiceAccountUpload == 'Y' ]]; then cd /mnt/user/appdata/other/rclone/remotes/$RcloneUploadRemoteName/ CounterNumber=$(find -name 'counter*' | cut -c 11,12) CounterCheck="1" if [[ "$CounterNumber" -ge "$CounterCheck" ]];then echo "$(date "+%d.%m.%Y %T") INFO: Counter file found for ${RcloneUploadRemoteName}." else echo "$(date "+%d.%m.%Y %T") INFO: No counter file found for ${RcloneUploadRemoteName}. Creating counter_1." touch /mnt/user/appdata/other/rclone/remotes/$RcloneUploadRemoteName/counter_1 CounterNumber="1" fi ServiceAccount="--drive-service-account-file=$ServiceAccountDirectory/$ServiceAccountFile$CounterNumber.json" echo "$(date "+%d.%m.%Y %T") INFO: Adjusted service_account_file for upload remote ${RcloneUploadRemoteName} to ${ServiceAccountFile}${CounterNumber}.json based on counter ${CounterNumber}." else echo "$(date "+%d.%m.%Y %T") INFO: Uploading using upload remote ${RcloneUploadRemoteName}" ServiceAccount="" fi ####### Upload files ########## # Check bind option if [[ $CreateBindMount == 'Y' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: *** Checking if IP address ${RCloneMountIP} already created for upload to remote ${RcloneUploadRemoteName}" ping -q -c2 $RCloneMountIP > /dev/null # -q quiet, -c number of pings to perform if [ $? -eq 0 ]; then # ping returns exit status 0 if successful echo "$(date "+%d.%m.%Y %T") INFO: *** IP address ${RCloneMountIP} already created for upload to remote ${RcloneUploadRemoteName}" else echo "$(date "+%d.%m.%Y %T") INFO: *** Creating IP address ${RCloneMountIP} for upload to remote ${RcloneUploadRemoteName}" ip addr add $RCloneMountIP/24 dev $NetworkAdapter label $NetworkAdapter:$VirtualIPNumber fi else RCloneMountIP="" fi # Remove --delete-empty-src-dirs if rclone sync or copy if [[ $RcloneCommand == 'move' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: *** Using rclone move - will add --delete-empty-src-dirs to upload." DeleteEmpty="--delete-empty-src-dirs " else echo "$(date "+%d.%m.%Y %T") INFO: *** Not using rclone move - will remove --delete-empty-src-dirs to upload." DeleteEmpty="" fi # Check --backup-directory if [[ $BackupJob == 'Y' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: *** Will backup to ${BackupRemoteLocation} and use ${BackupRemoteDeletedLocation} as --backup-directory with ${BackupRetention} retention for ${RcloneUploadRemoteName}." LocalFilesLocation="$LocalFilesShare" BackupDir="--backup-dir $RcloneUploadRemoteName:$BackupRemoteDeletedLocation" else BackupRemoteLocation="" BackupRemoteDeletedLocation="" BackupRetention="" BackupDir="" fi # process files rclone $RcloneCommand $LocalFilesLocation $RcloneUploadRemoteName:$BackupRemoteLocation $ServiceAccount $BackupDir \ --user-agent="$RcloneUploadRemoteName" \ -vv \ --buffer-size 512M \ --drive-chunk-size 512M \ --tpslimit 8 \ --checkers 8 \ --transfers 4 \ --order-by modtime,$ModSort \ --min-age $MinimumAge \ $Command1 $Command2 $Command3 $Command4 $Command5 $Command6 $Command7 $Command8 \ --exclude *fuse_hidden* \ --exclude *_HIDDEN \ --exclude .recycle** \ --exclude .Recycle.Bin/** \ --exclude *.backup~* \ --exclude *.partial~* \ --drive-stop-on-upload-limit \ --bwlimit "${BWLimit1Time},${BWLimit1} ${BWLimit2Time},${BWLimit2} ${BWLimit3Time},${BWLimit3}" \ --bind=$RCloneMountIP $DeleteEmpty # Delete old files from mount if [[ $BackupJob == 'Y' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: *** Removing files older than ${BackupRetention} from $BackupRemoteLocation for ${RcloneUploadRemoteName}." rclone delete --min-age $BackupRetention $RcloneUploadRemoteName:$BackupRemoteDeletedLocation fi ####### Remove Control Files ########## # update counter and remove other control files if [[ $UseServiceAccountUpload == 'Y' ]]; then if [[ "$CounterNumber" == "$CountServiceAccounts" ]];then rm /mnt/user/appdata/other/rclone/remotes/$RcloneUploadRemoteName/counter_* touch /mnt/user/appdata/other/rclone/remotes/$RcloneUploadRemoteName/counter_1 echo "$(date "+%d.%m.%Y %T") INFO: Final counter used - resetting loop and created counter_1." else rm /mnt/user/appdata/other/rclone/remotes/$RcloneUploadRemoteName/counter_* CounterNumber=$((CounterNumber+1)) touch /mnt/user/appdata/other/rclone/remotes/$RcloneUploadRemoteName/counter_$CounterNumber echo "$(date "+%d.%m.%Y %T") INFO: Created counter_${CounterNumber} for next upload run." fi else echo "$(date "+%d.%m.%Y %T") INFO: Not utilising service accounts." fi # remove dummy file rm /mnt/user/appdata/other/rclone/remotes/$RcloneUploadRemoteName/upload_running$JobName echo "$(date "+%d.%m.%Y %T") INFO: Script complete" exit

Been working on getting this running on my server, before I was just mounting to a /mnt/disks/google. But I've been having some issues. Once I run the mount script, it sets everything up and everything works in terms of downloading to the mount_mergerfs share, and the upload script uploading to the google drive. The issue seems to be somewhere in the mounting of the google drive. Once a file is uploaded to google drive (I can see it's uploaded on the drive itself), I can't access the file anymore. And in the mount_rclone, I can't access the gdrive folder at all. If I try to mount regularly like before, I can access everything. I've followed all the instructions as posted and haven't changed much (I want to eventually change the share names but I'd like to get it working first). Could it be because I'm not using a crypt?

As the title says, I'm looking to move my two VM VDisks off my cache drive (128gb samsung 840 pro) to an unassigned SSD (1tb samsung 850 EVO) because I need more space for each VM and 128gb isn't enough, plus I figure seperating would help lessen the load on the 128 gb ssd (other than VMs, the only thing the cache drive has is the default shares, all the made shares like movies, etc. go straight to the array since I'm limited by 1gbps ports anyway, so cache ssd speed doesn't make a difference). What's the easiest way for me to move my existing VDisks to the unassigned drive? I tried looking up and found a few different threads but could never get it to work. Any help is greatly appreciated. Thanks!

Nevermind, I fixed it by disabling fast boot and enabled CSM (Compatibility Support Module) in bios and it's working again. Guess I had that enabled that last and forgot to re-enable after bios update. Hopefully this can help someone else if they get a similar issue.

I updated my mobo bios the other day, and randomly today I'm having issues. The log shows 100% whenever I start one of the two VMs I have, one VM doesn't have gpu passthrough and it's fine, the one that does have my 2070 passed through is having issues, it starts regularly and doesn't give me any errors but there's no playback on the TV and I can't RDP into it either. The build is a 3950x, in a Crosshair VIII Hero, and the 2070 is the only gpu so I used the hex editor method to pass it through and never had issues until after I updated my bios, I noticed the settings reset on my bios and not sure if I just forgot to turn on a setting or not, I did make sure HVM and IOMMU are enabled. The Log is full of kernel: vfio-pci 0000:09:00.0: BAR 1: can't reserve [mem 0xd0000000-0xdfffffff 64bit pref] Any help would be appreciated. Thanks!

Sorry if this has been asked already but I couldn't find any topic on this. I have an array with 4 6TB drives, 1 of them being the parity drive, I need to replace all 4 with new drives (RMA from the whole SMR WD Red stuff) What would be the best way to replace all 4 drives? There's not a huge rush but I'd like to avoid putting unnecessary strain on the new drives by replacing one at a time if possible. Thanks

Hi, I followed Byte My Bits guide to get HW decoding with my 2070 setup but when I monitor the usage, it seems like only decoding is done by my GPU and my CPU usage is still pretty high (4770k). Files are 4k HDR remuxes, and when I set it to convert highest aka 4k, it shows high encoding and decoding (monitoring with nvidia-smi -dmon -s u in console) but anything lower it shows 0 for encoding. Is that guide outdated? I noticed in the first post, it mentions an edit that you don't need to do any of the console stuff like renaming plex transcoder to 2, and making a new one. I have a VM running that sometimes needs cpu usage so I'm trying to limit how much cpu usage plex is using right now (~30-40% with 1 1080p 20mbps stream). Any help is greatly appreciated, thanks!

Hi there, I have unraid setup on an old setup of mine and had a few questions. Apologizes if this is the wrong section 1. As far as I understand, my cpu (4770k) doesn't have IOMMU support so I can't passthrough the GPU to a VM right? 2. I currently have 1 windows 10 VM and a plex docker running, with the GPU encoding and decoding (as far as I know at least, hopefully I followed all the instructions correctly), is there anyway to use the igpu on my cpu to passthrough the windows VM through the hdmi port on the motherboard or is that not possible? Right now I have the bios setting to PCIE for graphics so unraid should be using the gpu and nothing is using the igpu at the moment as far as I know, but I can't figure out if I'm doing something wrong if it is not possible 3. If I'm unable to have the igpu work for the vm as I plan, what is the best setting to set the graphics in bios? (Auto, igpu or PCIE) I run a VM that uses 6 of the 8 threads and 12 of the 16gb of ram, and then plex just uses all cores as needed since the VM isn't always fully utilizing