ChillZwix

It has been working just fine for many years. But I was so stupid to reinstall it cuz of another problem I tried to find. Now when I click detect, its find the driver, and then I can see the list of sensors, I chose 1 for cpu and 1 for MB, then click apply, then I it just change to Not Used, and the list is no more. I need to reintall and reboot to get the list back, but the same keep happon. Any idea? After clicking APPLY

YES!!!!!! I fixed it, I found a post about SMB extra, I cleaned it up and did restart samba. NOw 37min after boot, no problem anymore. This is what I did remove, I think it has something to do with sever mulit channel support , since the log did say "Global parameter server multi channel support found in service section!" Anyway, It did fix it, and im happy now!

After I did update to 6.12.9, I started to have a problem, after 20min in after boot, one core does max out and RAM starting to grow until 100% and locks up the system. After many tries, and after safemode test, it happon only with plugins enabled and I dont even need array started or disks plugged in. Thanks to plugin EnchantedSyslog I did get this when the cpu started maxed out after 20min, Did google the code, find a old post that did send me here, anyone seen this before? Mar 31 22:28:23 Lucifer smbd[18713]: [2024/03/31 22:28:23.488637, 0] ../../lib/param/loadparm.c:1959(lpcfg_do_service_parameter) Mar 31 22:28:23 Lucifer smbd[18713]: Global parameter server multi channel support found in service section! Mar 31 22:28:23 Lucifer smbd[18713]: [2024/03/31 22:28:23.488693, 0] ../../lib/param/loadparm.c:1959(lpcfg_do_service_parameter) Mar 31 22:28:23 Lucifer smbd[18713]: Global parameter interfaces found in service section! Mar 31 22:32:28 Lucifer smbd[30672]: [2024/03/31 22:32:28.185601, 0] ../../lib/param/loadparm.c:1959(lpcfg_do_service_parameter) Mar 31 22:32:28 Lucifer smbd[30672]: Global parameter server multi channel support found in service section! Mar 31 22:32:28 Lucifer smbd[30672]: [2024/03/31 22:32:28.185625, 0] ../../lib/param/loadparm.c:1959(lpcfg_do_service_parameter) Mar 31 22:32:28 Lucifer smbd[30672]: Global parameter interfaces found in service section! Mar 31 22:34:27 Lucifer smbd[4476]: [2024/03/31 22:34:27.956301, 0] ../../lib/param/loadparm.c:1959(lpcfg_do_service_parameter) Mar 31 22:34:27 Lucifer smbd[4476]: Global parameter server multi channel support found in service section! Mar 31 22:34:27 Lucifer smbd[4476]: [2024/03/31 22:34:27.956324, 0] ../../lib/param/loadparm.c:1959(lpcfg_do_service_parameter) Mar 31 22:34:27 Lucifer smbd[4476]: Global parameter interfaces found in service section! The old post: https://forums.unraid.net/topic/121797-syslog-being-filled/ My post about the problem: https://forums.unraid.net/topic/160025-ram-problem-after-os-update/ EDIT: Did resolve it! Was something in my SMB Extra. https://forums.unraid.net/topic/160025-ram-problem-after-os-update/?do=findComment&comment=1397328

GOT SOMETHING, thanks to the EnchancedSysLog: Mar 31 22:28:23 Lucifer smbd[18713]: [2024/03/31 22:28:23.488637, 0] ../../lib/param/loadparm.c:1959(lpcfg_do_service_parameter) Mar 31 22:28:23 Lucifer smbd[18713]: Global parameter server multi channel support found in service section! Mar 31 22:28:23 Lucifer smbd[18713]: [2024/03/31 22:28:23.488693, 0] ../../lib/param/loadparm.c:1959(lpcfg_do_service_parameter) Mar 31 22:28:23 Lucifer smbd[18713]: Global parameter interfaces found in service section! Mar 31 22:32:28 Lucifer smbd[30672]: [2024/03/31 22:32:28.185601, 0] ../../lib/param/loadparm.c:1959(lpcfg_do_service_parameter) Mar 31 22:32:28 Lucifer smbd[30672]: Global parameter server multi channel support found in service section! Mar 31 22:32:28 Lucifer smbd[30672]: [2024/03/31 22:32:28.185625, 0] ../../lib/param/loadparm.c:1959(lpcfg_do_service_parameter) Mar 31 22:32:28 Lucifer smbd[30672]: Global parameter interfaces found in service section! Mar 31 22:34:27 Lucifer smbd[4476]: [2024/03/31 22:34:27.956301, 0] ../../lib/param/loadparm.c:1959(lpcfg_do_service_parameter) Mar 31 22:34:27 Lucifer smbd[4476]: Global parameter server multi channel support found in service section! Mar 31 22:34:27 Lucifer smbd[4476]: [2024/03/31 22:34:27.956324, 0] ../../lib/param/loadparm.c:1959(lpcfg_do_service_parameter) Mar 31 22:34:27 Lucifer smbd[4476]: Global parameter interfaces found in service section! This started when the CPU did hit 100% and the RAM started to grow!

New update: Its runs all fine in safe mode. Did update to 6.12.9 again since it even happon in 6.12.8. Now I did NOT even start the array. plugged all disks out of the server cabinet. Its still the same, after 20min after booting, its locks up a single core, and RAM keep building up intil its full.. Everything works fine before it fills up, but it cant shutdown normal, even I click shutdown. It does not shut down.. Just locks up all when it hit 100% ram.. So it must be a plugin ?? What plugin can have a delay 20min to do something? PLUGINLIST: Added a fresh diag lucifer-diagnostics-20240331-2153.zip

Okey, 40 min in and no problem. So must be a plugin that makes the problem then. How to I disable them, or do I need to unintall them all and install them one by one? Is it that you mean by services?

Im booting up in safe mode now. Services you meen, plugins right? Strange it locks up a core after 20 min every time. Hate to hear I need to cut power on the disks every time it locks up, Do you know a command that is better then htop to chech ram usage?

Did test again, It starts around 20 min after booting, every time. Its locks 100% on a core and ram keep building up. I did this time, stop all dockers, and even stop the docker itself. It did keep using more and more ram. So it must be something else.. HTOP does not show anything that idicate the cpu or ram usage... I cant find anything..

Hello, After I did the update to 6.12.9, my system did just stop responing after few min after complete. I needed to shut it down via holding down the power button to power it down. The same did happen the second time, but this time, I did see the RAM did rapitly build up, and hitting 98%, it got not responiding again. The third time I did downgrade to 6,12,8, I did sit and wait , after 24 min, the same did happon, but this time, I tries to power down the system before it did hit the top and I did download diag. Can anyone see something wrong? Everything was fine before upgrading in the first place... lucifer-diagnostics-20240330-1816.zip

Did change my PSU and now it been 7days stable! Thanks alot. It did not even strife my mind that the PSU can be the problem!

And disk problems.... HELP!!! 2 disabled disks. 5 disks with errors... more disks have been dismounted... All was working fine before turbo write did kick in... Cant be that all disks just ...... Added fresh diag, lucifer-diagnostics-20240102-2320.zip lucifer-diagnostics-20240103-0006.zip

Hello, I have been away from my server, and it has been offline for 11 months, updated to lasted OS, and updated all my dockers, but I cant get sonarr and radarr to start? get error 403. any help? Thanks! lucifer-diagnostics-20240102-2244.zip

Needed to shut the server down, and when I did start it backup. So was disk 3 and 4 deactiveded. So I did to activate them by stopping the array, remove them, start the array in maintence mode, shut it down, and add the disks back in. Then the array wanted to rebuild the array, so let it just do that. But then disks did keep pooping out and moved to unasigned disks, and was unmounted.. So now I did shut it down cleanly and hoping for some help. Did a diag before shuting down.... All my disks cant just be bad. All was good before I did shut it down.. See image of dashbord disks: lucifer-diagnostics-20230119-1729.zip

Hello, I can't find what is filling up my logs, can someone take a look and point me the right direction? Thanks! lucifer-diagnostics-20220914-1602.zip

Thank you, I didnt see that. Tried looking before asking. I didnt know that about the FS22 server, that's just a stupid concept..

@ich777: Did setup a V rising server, but how to set a password? And will a Farming Simulator 22 server come?

I see that now, I'm sorry. But thanks for helping, even I didnt do what I needed to try.

I did try a new flash, but with the same config, never a fresh unraid. That's why I did get the same problem.

THANK YOU SO MUCH!! I did delete the files and the webGUI come back after reboot. So easy fix, thank you!!

Yes, even tried installing new ram sticks..

Thanks for helping. Bios is default. The server boot up as normal, I can see that with a screen connected. I can do SSH to the server too. So cant be the hardware. This is what I get:

Also have testet that, only. MB, CPU and GPU with the flash drive is connected.. I dont understand..

If I try anything else then the normal boot at startup, the boot freeze. New flash drive, old config with ssl diabled. I have a screen connected and I cant do commands, I can even SSH to the server. So anyway to chech with commands? Can you help me if you get access over Teamviewer, with a browser and a putty ssh access?

As I did write before your first post: "I have tried download the flash stick backup from myserver, and created a new flashdrive, but do get the same problem.. Please healp anyone, over 2 weeks with the server down and I miss it alot.. EDIT: Even tryied disable SSL, bit still, no webGUI.. Just getting "ERR_CONNECTION_REFUSED"" So I dont know anymore..

If I try that, the bbot just freeze.