Michelle Bausager

Members
  • Posts

    46
  • Joined

  • Last visited

Everything posted by Michelle Bausager

  1. Okay I shifted to 'NginxProxyManager' and now the url points to: But I still get a 'Error when trying to connect (Bad healthcheck status)✖'
  2. Hmm I get into, what I presume is SWAGs default page. Again I'm not sure if the config file is configured correct, but in my lack of wisedom, I have a hard time finding resources about how it should be configered. I don't know if that's your cup of tea, @Siwat2545 or if I should post somthing in the SWAG community? As I stated before #NoStress :) Thank you again for your work :)
  3. If I change it back to https in nextcloud, when it's back to the old error again. & the original config still ends in a forever loop :E
  4. It still enters a forever-loop with the log saying; "nginx: [emerg] "proxy_redirect" directive is duplicate in /config/nginx/proxy-confs/onlyoffice.subdomain.conf:19" over and over again. If I comment the line out again & change the https to http; and change the address to http; I get another error now: Error when trying to connect (Mixed Active Content is not allowed. HTTPS address for Document Server is required.)
  5. I've been here before, unfortunately I suddenly had to take some months out of the calendar & didn't get any closer to a sulotion But I'm back To start with, I don't have a great knowledge of network protocols & usually take baby steps Last time I was here, the question arised if my proxy was pointing to http or https of onlyoffice, as fair as I know, it's https. But I'll hust walk you through what I have done & how far I've come If anyone have the time to help, it would be awesome. I followed Spaceinvader One's video: https://www.youtube.com/watch?v=dEOfwKH2DHc&t=190s When I had to copy the credentials I substatuded the Let's Encrypt folder to Swag as: mkdir /mnt/user/appdata/onlyofficeds/Data/certs cp /mnt/user/appdata/Swag/keys/cert.crt /mnt/user/appdata/onlyofficeds/Data/certs/onlyoffice.crt cp /mnt/user/appdata/Swag/keys/cert.key /mnt/user/appdata/onlyofficeds/Data/certs/onlyoffice.key After that I used the .conf file he provided and changed 433 ports to 4330, since I ude that as my 'Host Port 2' When I then restarted the Swag Docker, an error appeared If I comment the ''include /config/nginx/proxy.conf;" out it doen't end in a forever loop and it acually starts up. When I use this .conf file, the error in nexcloud says: Otherwise it's just a "Server not found" or something like that. As far as my understanding goes, in the .conf file, it refers to it as a 'https', which means it point to it as a https? I think :s I hope someone can help me, it's not critical, but it would be nice to get it up & running. Thank you again for your great work
  6. Yes, but I would like to see the grayed-option before I buy. My question boils down to; is it greyed-out or not visible before the purchase? Edit: It's not visible. Now to figure out why the migration didn't work :E
  7. Quick and maybe a stupid question. I just migrated from Binhex-Plex to Linuxserver.io, because of hardware transcoding. I know Binhex has one for plexpass, for HW-transcoding, as far as I know. But that just confuses me & SpaceinvaderOne made a video using linuxservers docker, so for me, is was a good place to start. But my question is, does the hardware transcode option only visible if you have a PlexPass? I can se my options for transcoding is different from the one he(SpaceinvaderOne) has in his video, using the same docker. Or have I made a mistake when I migrated? Edit: Nvm, it all looks fine, except the settings. But when I press play nothing happens. It's seems a mistake have been made :E
  8. I use SWAG, since I'm far from knowledgeable on this topic! I usually follow SpaceInvader One and his videos, but I know it usually just a scratch on the surface. But I haven't gotten it to work. I still get a "Error when trying to connect (Bad healthcheck status)✖" when I try to get it to work. But when I access the Document Server from the docker (WebUI) or the website (that I use in the proxy), I go to the OnlyOffice docker server. So the docker works? Maybe SWAG also works? My question is; is this a SWAG problem? Maybe a Nextcloud problem? or is it something on the bug-fix-table? I really want it to work, but I also know there might be a lot of work in it. #NoStress Thank you again @Siwat2545 for making it possible (I use the OnlyOfficeDocumentServer, not the OnlyOffice Document Server. I don't really know what the difference is :E)
  9. Seems to have worked. A surprise was I needed to create a network "proxynet" again. But hey, seems to work. Thank you so much :)
  10. I'll be out of town for a couple of days and can see there's a new update(6.9.1). I'm going to update it and as soon as i return, I'll try the previous solutions, otherwise I'll try the your new sugestion. But I really don't like deleting things :E Feels like there's a high probability of error from my side, but hey, gotta learn somehow
  11. Unfortunately I get the same error as before. (It is my bedtime, but I'll surely be back tomorrow! Thank again for the help so far!)
  12. The plot thickens! The "docker rm nextcloud" got an error:
  13. I'm in a funny situtation, ontop of the new update (6.9.0) I got some new gear.; X570 Motherboard with an 3700x AMD. And my nexcloud suddenly stoped working. It says it's dead and the logs just repeat: e":"can not get logs from container which is dead or marked for removal"} When I try to start it, it says: But I don't really know what caused it, or what happened? I hope someone is wiser then me and know where to start troubleshooting or know the root cause. (Well, chances are most of you are smarter and wiser then me )
  14. This didn't work for me ether :( If you need any logs or anything, just say the word :)
  15. Hello After I just reinstalled OnlyOffice on Nextcloud (with SWAG), it doens't work. I've follow SpaceInverder One's video on the subject but I get a "Error when trying to connect (Bad healthcheck status)". Does anyone know how to fix this problem?
  16. Wtf.. It worked.. Thank you guys. Guess it got corropted while copying over? Maybe? I don't know. But thank you so much! You just saved my day! You're amazing for helping! Edit: Maybe I talk to soon. But the pictures are back :i Edit no.2: When one restart isn't enough, you do it again. It works Thanks again guys
  17. Wait... inside the .zip file, there's a "my-swag.xml" I might try to transfer it over and see what happens. I'm so cunfused.
  18. Okay :9 Just to clarify: Downloading the docker and pointing it to the same folders doesn't overwrite the data. Which means I can 'download' the docker again. The downside to all of this, is the tamplete for the configuration, is gone, and I have to do it from scratch. Which means; pointing to the fodlers, have the right 'Network Type' and so on. Quick question, does it overwrite the tamplete? Or should I delete the 'my-nextcloud.xml' I have? Yea, I went into a panic since there was a power outage which grilled my USB/Flash-drive real good. So I actually pulled the Flash-drive backup from the CA Backup folder and tried flashing it to the USB/Falsh-drive and it didn't work. But I actual did exactly how you disrabed it and here I am So I don't really know what wnet wrong. I use OneDrive for offloading stuff like that, maybe that was the error :E
  19. Thank you. That means I'm missing the 'my-swag.xml' & there's probably something wrong with the 'my-nexcloud.xml'. Since it's just an "entrie", is there a easy way to import it again? I'm a little afraid to just download it again, from the Apps, since I don't want my data overwritten
  20. my-swag.xml is missing. my-nextcloud.xml is there. You're probably right, something is corrupted :E my-nextcloud.xml Edit: I can see there's a 'my-letsencrypt.xml', I don't know much, but that's what it used to be called. I don't know if it still usese that file for configuration?
  21. Useing 'krusader' there's no plugins in /config. Only: /config/.dbus /config/log /config/xdg If that's where you're refering?
  22. Community Applications (Apps), following Spaceinvader one video on it :s
  23. I reasonly had to backup my appdata using 'CA Backup', but atherwards it seems that two or my dockers doesn't seem to work. 'Nextcloud' & 'Swag'. As the pictures illustrates, 'Fix Common Problems' doesn't seem to know how to fix it. The data & files of nextcloud and swag is still under the folder 'Appdata'. Does anyone know of this problem? Should I just "download" the docker again, and then the tempale marges with the data/files i allready have?