keinooj

Is anyone else getting a "Invalid response received from SkyHook." when trying to search for a show? A Google search seems to suggest that its an SSL Cert error. I have Certificate Validation set to "Disabled for Local Addresses" in General > Security and it's worked up until this point. Disabling it completely doesn't yield any changes.

Thanks, @JorgeB! I thought it was already flashed to IT mode since it was working in the previous config. I know there is a more up-to-date FW available for it so I'll try and flash it.

Hello! I recently swapped my motherboard, CPU, and RAM from a Supermicro X8DT3 with Dual Xeons (E5620) and 48GB DDR3 to a MSI Z490 Gaming Plus with an i5 11600K and 16GB DDR4. The HBA (PERC H310) and the drives attached are known good and were working in the previous configuration. However, after swapping over to the new hardware and setting the BIOS to CSM, the HBA boots, and it is listed under PCI devices in unraid, but the drives aren't showing up (screen shots attached along with diagnostics). There are 8 devices missing - 7 in the array and 1 cache. I've tried physically changing the PCIe slot but no luck. Of note, I have to set the BIOS to boot as CSM and have a GPU installed for video otherwise the system doesn't even boot (a quirk of the Intel platform, apparently), otherwise the HBA wouldn't even show up. I've also re-seated all the cables (data and power) on the drives and on the card. I'm open to trying anything and everything! TIA tower-diagnostics-20221218-1957.zip

Just got Frankfurt working with port forwarding.