[[Support] buanet - ioBroker]

@amiga4ever Wenn du den zweite Container erstellst, hat er dann zufällig die gleiche IP Adresse wie der vorherige und läuft parallel? Normalerweise sollte es funktionieren. Hab damals mit Andre das Verfahren zum direkten einspielen eines Backups unter Unraid entwickelt.

[Run Raspberrymatic as docker]

Funny thing, I think about the same solution at the moment and the prerequisites are the problem I have too

[Preclear.sh results - Questions about your results? Post them here.]

Hi Joe L.

 

thanks for the response. I use unRAID version 5.0.5 32bit

The disk didn't respond to any smartctl command after the preclear ended with this message, it's completely un-responsive. I tried a dd to clear the mbr, that worked. After that I tried it with more then 1024 bytes and it crashed so I'll return that drive because I think it's bad. Testing in 2 other systems reproduced that error so the disk controller of my unRAID Server cannot be the problem.

 

Duff

[Preclear.sh results - Questions about your results? Post them here.]

Hi togehter, I have new 4TB disk and tried to preclear it in two different servers. I alwas get the following message at the end:

 

=                unRAID server Pre-Clear disk /dev/sdg

=              cycle 1 of 1, partition start on sector 1

= Disk Pre-Clear-Read completed                                                  DONE

= Step 1 of 10 - Copying zeros to first 2048k bytes                      DONE

= Step 2 of 10 - Copying zeros to remainder of disk to clear it      DONE

= Step 3 of 10 - Disk is now cleared from MBR onward.                  DONE

= Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4              DONE

= Step 5 of 10 - Clearing MBR code area                                        DONE

= Step 6 of 10 - Setting MBR signature bytes                                DONE

= Step 7 of 10 - Setting partition 1 to precleared state                DONE

= Step 8 of 10 - Notifying kernel we changed the partitioning      DONE

= Step 9 of 10 - Creating the /dev/disk/by* entries                      DONE

= Step 10 of 10 - Verifying if the MBR is cleared.                            DONE

=

Elapsed Time:  11:48:47

========================================================================1.15

==

== SORRY: Disk /dev/sdg MBR could NOT be precleared

==

== out4= 00000

== out5= 00000

============================================================================

0+0 records in

0+0 records out

0 bytes (0 B) copied, 7.1247e-05 s, 0.0 kB/s

0000000

 

After that I have to reboot that preclear recognizes that drive again and if i run a preclear_disk.sh -t /dev/sdg it says:

 

################################################################## 1.15

Device Model:    WDC WD40EFRX-68WT0N0

Serial Number:    WD-WCC4E1714880

LU WWN Device Id: 5 0014ee 2b4d4275f

Firmware Version: 80.00A80

User Capacity:    4,000,787,030,016 bytes [4.00 TB]

 

Disk /dev/sdg: 4000.8 GB, 4000787030016 bytes

255 heads, 63 sectors/track, 486401 cylinders, total 7814037168 sectors

Units = sectors of 1 * 512 = 512 bytes

Sector size (logical/physical): 512 bytes / 4096 bytes

I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Disk identifier: 0xf3034ac4

 

  Device Boot      Start        End      Blocks  Id  System

########################################################################

failed test 1

failed test 2 00000 00000 00000 00000

failed test 3 00000 00000 00000 00000

failed test 5

failed test 6

========================================================================1.15

==

== Disk /dev/sdg is NOT precleared

== 0 0 4294967295

============================================================================

[Preclear.sh results - Questions about your results? Post them here.]

Hi I had to format one of my 2TB HDDs with NTFS. Now I want to preclear this disk again before I assign it to the arry. Is it possible to preclear the disk without the pre-read(-W Option) because I know the Disk is Ok and I want to save Time?