Mattti1912

Hello I tried to change the network to ipvlan and that didnt work.. anyone who has an idea how to speedup the docker?? Thank you

Hello good people:) I have a problem getting the right speed in some of my docker containers.. I' ve tried to check almost everything, and now i have found that my docker network is running macvlan. I have seen somewhere that the best method is to change it to ipvlan. So my question is, is there a benefit for changeing it to ipvlan?? And if i change it, could there be any problems doing that?? Maybe some docker errors?? Hope you can help Thank you and regards

Hello people I have a problem with speed in my qbittorrentvpn container. i have a 2.5 gbps connection, and the problem is that im only able to reach about half. I tried to set another internal ip than the bridge, and that helped a little, but now i went back to bridge (because of other issues), which took a little of the speed. I use protonvpn.. I tried to test the Hdds and ISP connection so i tested using sabnzbd and im getting full speed there.. So where is the problem.?? Thank you

Hey good people I have an issue, i installed binhex-jellyfin with a nightly build to get the new jellyfin 12 version.. Now i tried to get it back to a stable version, but how do i do that?? Tried to set the repos to jellyfin/jellyfin:latest. From lscr.io/linuxserver/jellyfin:nightly But thats a no go:( That will not work.. Anyone with an idea?? Thank you!

Hello good people Im using this docker, but my speed is slower than my internet connection.. i have an 2.5gbps, and with vpn enabled i get about 1300 mbps.. I have changed so many things and nothing has made it faster.. I have tried to change to nvme, i have changed to ram, and i have disabled unpak and so forth.. I also tried with few and more connections.. i have tried protonvpn and mullvad.. Now my question is. If im using ssl enabled, is that as safe as using a vpn?? Thank you, regards!

Hello again. My server some times drop the nvme cache drive, while its running thank you

Thank you.. Ohh i didnt know that... I'll be updating, after next crash.. thank you, regards

Hello again.. Thank you! Here is my new diagnostic: tower-diagnostics-20260810-1533.zip

Hello again, thank you. Since i have had problems with my old nvme drive. now changed to a new one, i moved my docker and appdata folder back to my array.. just so you know.. regards

Hello again thank you!! I now enabled syslog server.. But whats next?? How do i send the logs, without my personal info will get public?? you know ip addresses and so on?? Thank you and regards:)

Hello again.. Thank you. I made it, here sit is. tower-diagnostics-20260810-1344.zip

Hello good people I have some problems with my server, and i dont know what it is:( at first the nvme kept disabling, i changed the nvme, and it worked until now.. Is there a way to check my hardware for errors? For now i cant get to the the diagnostic button.. Hoping someone can help.. Thank you

Thank you.. Can you tell me how to do that??

Hello again, and sorry for clicking on the solution button that was a mistake here is the iperf Connecting to host 192.168.0.233, port 5201 [ 5] local 192.168.0.233 port 60302 connected to 192.168.0.233 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 3.11 GBytes 26.7 Gbits/sec 0 895 KBytes [ 5] 1.00-2.00 sec 3.15 GBytes 27.1 Gbits/sec 0 895 KBytes [ 5] 2.00-3.00 sec 2.89 GBytes 24.9 Gbits/sec 0 895 KBytes [ 5] 3.00-4.00 sec 3.09 GBytes 26.6 Gbits/sec 0 895 KBytes [ 5] 4.00-5.00 sec 3.08 GBytes 26.5 Gbits/sec 0 895 KBytes [ 5] 5.00-6.00 sec 3.12 GBytes 26.8 Gbits/sec 0 895 KBytes [ 5] 6.00-7.00 sec 3.18 GBytes 27.3 Gbits/sec 0 895 KBytes [ 5] 7.00-8.00 sec 3.18 GBytes 27.3 Gbits/sec 0 1023 KBytes [ 5] 8.00-9.00 sec 3.21 GBytes 27.5 Gbits/sec 0 895 KBytes [ 5] 9.00-10.00 sec 3.13 GBytes 26.9 Gbits/sec 0 256 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 31.8 GBytes 27.3 Gbits/sec 0 sender [ 5] 0.00-10.00 sec 31.8 GBytes 27.3 Gbits/sec receiver iperf Done.

Hello again I just installed chrome as a docker and it hits 2300mbit, without vpn, so i think that it must have something to do with my vpn: On my desktop still no problem, i will try to see if i can use iperf My cpu is an amd 3700x Thank you

Hello again Thank you My router supports the speed, and i've installed speedtest, which says 2500 mbit from my pc to my server.. My interface is also saying 2,5gbps..and my vpn is also not caped:(.. And i get full speed on my desktop:.. Anyone with an idea??

Hello good people I've just upgraded my internet speed to 2500mbit, but i still have a download about 1000mbit.. Anyone who has an idea, on how to fix that?? I have 3 hdds and a nvme drive.. my primary array, is set so that all new downloads will go through nvme cache drive.. But is still slow I have a 2500 mbit intel nic in my server Anyone who have an idea?? Thank you regards

Hello again:) Thank you.. I have appdata and other shares on the nvme, but it keeps crashing. Is there a way to search for errors?? thank you regards

Do i have to add any other informations regarding specs?? Thanks

Hello People.. My server just crashed on me:(( After a restart the docker is not working.. Anyone who can help?? Thank you! regards tower-diagnostics-20260621-1523.zip

Hello good people:) With this update 7.3 is a new feature TPM.. Do i have to change anything in my setup before updating?? like a bios change?? or is it just like every other update?? I am still going to keep using my usb-stick as primary key.. Is there any other settings that has to be changed, before updating?? Thank you! regards

Hello good people Im trying to route prowlarr and flaresolverr through my binhex-delugevpn.. But i have hit a wall. Is there anyone who knows how to do this?? Thank you.!

Hello again.. Thank you If i have to change motherboard or cpu. Then what an i have to do in regards to unraid?? will there be a driver issue?? Thank you!

Hello again.. Happened again tower-diagnostics-20260506-2019.zip

Hello again, happened again Here is the new file... Hope it helps Thank you tower-diagnostics-20260501-0932.zip