LoyalScotsman

found how to do it please see results and fresh logs, hope to here from you soon UUID: 95913f78-fc8f-491e-b13a-789a9383ef8a Scrub started: Sat Sep 2 21:19:17 2023 Status: aborted Duration: 0:29:00 Total to scrub: 127.51GiB Rate: 70.81MiB/s Error summary: csum=34 Corrected: 33 Uncorrectable: 1vault101-diagnostics-20230902-2131.zip Unverified: 0

can you please confirm the progress to do this ? doing a google found the following command to get cache stats and i think that dont look good. think one of my cache disks has dropped off but not sure root@Vault101:~# btrfs dev stats /mnt/cache [devid:1].write_io_errs 37728126 [devid:1].read_io_errs 25990032 [devid:1].flush_io_errs 0 [devid:1].corruption_errs 232473 [devid:1].generation_errs 0 [/dev/sdg1].write_io_errs 1763 [/dev/sdg1].read_io_errs 1996297 [/dev/sdg1].flush_io_errs 0 [/dev/sdg1].corruption_errs 2 [/dev/sdg1].generation_errs 0 [/dev/sde1].write_io_errs 243721484 [/dev/sde1].read_io_errs 231592189 [/dev/sde1].flush_io_errs 0 [/dev/sde1].corruption_errs 335203 [/dev/sde1].generation_errs 0

logs attached, daigs attached Sep 2 19:12:58 Vault101 kernel: BTRFS warning (device sdg1): checksum verify failed on logical 158164238336 mirror 2 wanted 0x2a076ccd found 0x69294921 level 1 ran this to locate file when i go to the location its empty root@Vault101:~# find /mnt/cache -inum 158164238336 find: ‘/mnt/cache/appdata/plex/Library/Application Support/Plex Media Server/Metadata/TV Shows/3/495d21813339e6542d1713ccc0ed51d7c636e14.bundle/Contents/_stored/seasons/3/episodes/11’: Input/output error did a scrub check currently still running i think, first time so no sure if correct command for cache as found another forum on similar issue - root@Vault101:~# /usr/local/emhttp/plugins/dynamix/scripts/btrfs_scrub 'start' '/mnt/cache' '-r' but i have nothing to delete could i please have assistance and input on this please? his issue caused docker to crash and then had to force a re boot on my server so currently it is doing a parity check. vault101-diagnostics-20230902-1922.zip vault101-syslog-20230902-1829.zip Edit this appears to be spamming my syslogs now Sep 2 19:49:08 Vault101 kernel: BTRFS error (device sdg1: state EA): bdev /dev/sdg1 errs: wr 1763, rd 1994530, flush 0, corrupt 2, gen 0 Sep 2 19:49:08 Vault101 kernel: BTRFS error (device sdg1: state EA): bdev /dev/sdg1 errs: wr 1763, rd 1994531, flush 0, corrupt 2, gen 0 Sep 2 19:49:08 Vault101 kernel: BTRFS error (device sdg1: state EA): bdev /dev/sdg1 errs: wr 1763, rd 1994532, flush 0, corrupt 2, gen 0

So when i first set up this it was failing so i now have a selection of failed backups that i cannot delete, i have tried to delete them via kurseder but it refuses to delete any advice on how to delete the failed one because taking up unnessaray space

I have an other q

yes the oen from Squids i still have it installed but finally got around to updating to your one as per his notes when accessed his one

just seen this so i have excluded this from the next backup what contents is this excluding ? i suspect this will exclude users watched data ? which if i am correct the metadata only reason i question it is cause the old appdata backup ran fine and i don't want to completely remove the old one until i know this is working correctly

please can i get some assistance with this

Hello looking to see if can get assistance on this error please just set this up can see that the backup has failed on it within the DIR 18.07.2023 11:26:56][Main][info] Done! [18.07.2023 11:26:56][Main][warning] An error occurred during backup! RETENTION WILL NOT BE CHECKED! Please review the log. If you need further assistance, ask in the support forum. [18.07.2023 11:26:56][Main][info] DONE! Thanks for using this plugin and have a safe day [18.07.2023 11:26:56][Main][info] ❤️ ab.debug.log ab.log

thank you very much issue now resolved

Hello can i please have some assistance my delugevpn has been working perfect with nordvpn for years, but recently getting the below within the deluge logs and delugevpn wont launch with VPN enabled, but if disabled it allows me to access the web interface. i have tried several OVPN files, have rebooted unraid itself no change you can see the current OVPN files i am using and the credentials.conf file within the OVPN path recently updated to unraid 6.12.1 - originally was working rolled back to 6.11.5 and restore appdata from a backup on same day i upgraded and still doing this can someone please advice on how to fix this if you need anything else let me know

Hello so the working one is not on a custom network it runs through the basic bt home hub the none working one which was working prior to this issue occurring is on a customer network with Ubiquiti hardware i suspect the issue is with virgin because cannot access the sites required for prowlarr to work. so wonder if anyone is having this issue with virgin and how did they get around it ? does anyone know how to set up a indexer proxie to work with VPN ?

anyone able to assist ?

setting up prowlarr and flaresolverr the reason for setting up this is because Jackett was failing and looking up this i found prowlarr to be a better solution set this up on 2 systems one works one does not copied all settings from working unriad box to the one none working unraid box working box is on BT full fibre 1gb none working is on virgin 500mbs when adding an indexer i am getting the below error "Unable to connect to indexer, please check your DNS settings and ensure IPv6 is working or disabled. The SSL connection could not be established, see inner exception." the virgin box does not support ipv6 i have pulled the log files and event logs from prowlarr and also the logs from unraid can someone review and assist me please logs from unriad prolarr.txt event logs.txt log files.txt

@ljm42 i am getting the same can you let me know when sorted

thank you i will take this notes on but managed to resolved it by binning my current config file and DB and inputted the backup config file and DB and its now resolved

I have tried reverting back a backup on my server but when i go back 7 or 14 days the issue still persists. When i mean reverting a backup i am referring to the Radarr and appdata only. If possible what is the best steps on how to revert the Radarr version back its self and then i will test and if no go i will then move the backup DB over to see if this helps. I have had a google on how to revert the radarr version back but not having much luck do you have the steps on how to do it ?

Hello did you get a solution for this because mines has done the same i did revert back a week from backups to make no difference

Hello Can someone please assist I will provide the full story So recently I noticed my binhex-delugevpn was for some strange reason binning ever download at night time even if uncompleted. So I started an investigation but no luck so I completely removed it and reinstalled it which resolved the issue but has now brought up a new issue. So the downloads are working fine but within windows file explorer i couldn't see the completed downloads, so I then went onto binhex-krusader and the new downloads are visible and also visible on the thermal for Unraid. next step i checked the permissions for my download folders and subfolder to find they were set to the below the download folder its self - drwxrwxr-x 1 nobody users 66 Aug 6 03:25 Downloads/ but the subfolders were set to drwxrwxrwx 1 nobody users 6 Aug 6 08:52 completed/ drwxrwxrwx 1 nobody users 10 Aug 6 03:25 torrents/ so i then changed the permissions to match the Downloads folder which then presented all the completed downloads so i therefore thought the issue was resolved but then i find that the next download was also invisible in windows so i checked the above again to find that the completed folder permission have stayed visible on "drwxrwxr-x 1 nobody users" but the completed download itself is as follows drwxrwxrwx 1 nobody users 218 Aug 6 09:33 Star.Wars So i never had this issue with my pervious binhex-delugevpn install but for some reason this one is not playing ball so how do i stop delugevpn putting my files into the following permissions "drwxrwxrwx" cause this is preventing sonarr and radarr from working correctly "EDIT SONARR AND RADARR ARE WORKING FINE" so my main question is how do i prevent deluge from making the files invisible for windows ? daigs logs uploaded server-diagnostics-20210806-0934.zip

I would like to advice after restoring to a new USB drive it has aloud me to upgrade to 6.9.2 not sure why my old USB failed to do so

just an update new USB purchased and unraid has now been restored to new USB as well as the license key being applied to the new key just awaiting the parity check to complete due to a restore being done once the parity check has completed i will try and push the upgrade to 6.9.2 again, fingers crossed this time

yeah its a strange one. So i will try this again at the end of the month and i shall also pick up another usb, i will update here once i try it again. thanks for your input

so i tried again and the following happens, i stop the array and push the update through so on the update screen it will display that the update has been successful, image below just for reference to where i am referring to, but ever time on reboot it seems to not upgrade and stays on version 6.8.3 I also followed the below forum page to manually upgrade but again it doesn't upgrade when it goes to the boot screen it still says 6.8.3 but after i pushed the update and reboot, the server then becomes unresponsive to pings and the GUI cannot be loaded also tried to load gui in safe mode I have the 2 logs that you suggested me to get below - "tower-diagnostics-20210414-0957" is the terminal logs without safemode "tower-diagnostics-20210414-1015" is the terminal logs while in safemode and no plugins also another note i have disklocation plugin i removed this as well and tried to upgrade with no change "this cant be updated because the new update is only for 6.9.0 another note, after the first update i did the reboot and i left the server around 15/20 mins before doing another restoring any help would be appreciate because i really want to upgrade to 6.9.0, also another side note after restore and starting the array it has started another parity check tower-diagnostics-20210414-0957.zip tower-diagnostics-20210414-1015.zip

thank you for the response I had already set the array to not auto start so not sure why it decided to run a parity check. yeah i am up for trying again i shall do that this morning and update on here with how it goes.

decided just to restore from a backup and all is running again So i shall have a look more into what could have caused the problem i suspect maybe a plugin i should have removed but didnt doing a parity check now so shall need to wait 10/12 hours for that to complete before i try again