NotHere

Thanks so much for the information. Sucks that I just couldn't figure it out :(. Is there a way to change the port from 8080 to anything else? No matter that i do I just cant change the port. Could be a me problem of course, I just have changed ports to containers before without issues, but this one wont do it.

Hello there. I just installed your "LocalAI". It seemed quick and easy. My issue is that I cant change the port from 8080 to anything else. I have tried to change it at the "WebUI HTTP Port:" variable you added to the templet and that did not do it. I know it works cause I was able to go into the WebUI from the docker and it shows the installed modules. However, I have no clue how to use them :/. Any more information on how to use the modules? I looked at the documentation, "https://localai.io/" but that was no much help for someone like me who does not understand anything from there. Any help on how I can use the modules I would be greatly appreciated.

So now that I know I have a bad stick, I tested each of the 4 sticks alone, and found the bad seed. I can change that and I should not have any more weekly crashes?

Understood. I am going to try tested each stick 1 by 1 and see what comes out of it. I guess this is the reason for all my crashes

I was not able to get memtest running from USB. I downloaded it, used their flashing program and followed the instructions. However, it did not work, nothing would happen when I tried to boot from the USB. However, Unraid has memtest built in, so I used that. I assume my memory is dead? I was told to reseat the sticks and try again. I am going to do that. This is what I got at almost 50% done.

I did NOT. I don't think I know how. However, I can always Google, and after a quick Google, I would assume I need to load a separate SSD with windows installed on it to run a program like MemTest86?

HI HI. Its been a while, just wanted to capture as much as I could. From the time I figured out how to get the logs to actually populate, I have had like 3 crashes. I consider a crash when I cant access the GUI or when I cant access a docker instance. Let me know if you see anything. I will keep it going as I just keep having issues over and over that I never had before the last major update. It could always be user error, I am a noob, I know, but its just insane how I never had issues before the last major update. Yes, I have added more HDD, more DATA, and more dockers, that might have a lot to do with it, but I honestly have no clue syslog-192.168.1.10.log

Honestly, I have not. I am not sure how to get that done, but I will Google it for sure. THanks for the advice.

Good day all. Looking for some help please. I have noticed that recently, my Unraid becomes unresponsive. The GUI does not load. 25% of the time I can access the server via SSH and a reboot commend fixes it. However, 75% of the time, like it just happened now, nothing work, not even SSH, so I have to power cycle it myself by holding down the power button. Can someone please tell me if you can see why this keeps happening? I have uploaded the diagnostics see if anyone can see something in there. haberworld-diagnostics-20240111-1534.zip

Sadly I never did :(. I just changed my docker to folders and never looked back.

This thread was useful to me as well. I never turned on SSH as I thought it was automatically ON. Thanks for the information.

That was insanly easy.. WOW, thanks so much for this information that worked perfectly!

Good day all. I have installed Ghost CMS with the help of https://technicalramblings.com/blog/how-to-setup-a-ghost-site-with-letsencrypt-and-mariadb-on-unraid/#ghost So now that I have it installed, I dont know how to login. I do not know what the admin login info is. On top of that, when I try to create an account, it says "Failed to send magic link email". Any idea how I can 1. login to the admin account? 2. create new accounts? Thanks so much

Is there any way to add the drivers this plugin needs for your motherboard? It is something a lot of people like and really want to have working but of course, we know it cant support all motherboards. Is there no way to update it yourself to add your own drivers?

I dont have Exclusive Shares on, its OFF. Seems like a feature for people who know a bit more than I do. What I want to talk about is your crashes. I never mentioned it before in my main thread, but my server crashes all the time. At least 3 times a week :/. I am going to assume its because of this issue since you have the issue as well and mentioned about the crashing. I just hope it gets fixed soon.

Interesting. I am going to do a new clean install and I will not install deluge vpn anymore. I will see if that works at all. Yes, I have done several clean installs and then restored all my dockers images and the issue still happens. It may have to do with deluge. Ill be back when its all done and see if that works.

Ahh, so I am not alone. Thats kinda good news LOL. I would go back to xfs cache drive but ill keep giving this zfs a try. I never had this issue when the format was xfs though...

Understood. Ill just wait for the next update and see if I still have the same issue thanks for your time.

I see. I mean, as of right now I don't think its going to bother me so much. I can just restart the server and then ill be able to do whatever I need to the disks. However, is this an issue that is just for me? I haven't seen any other thread like this since 6.12.2, so I assume its just me.

Good day. Any chance there is a fix for this? Am I doing something wrong? I noticed that NOW that there is nothing shown when running `losetup` as it did on my previous posts, I am able to REBOOT or SHUTDOWN but I am still unable to stop the array. I downloaded another diagnostics while it was stuck in case it helps. haberworld-diagnostics-20231015-1110.zip

I mean, after I clicked on STOP the array, ran all the commands I could find on the previous thread mentioned, even navigated away from the server and went back, it still showed "Array Stopping•Retry unmounting disk share(s)..." and none of the disks showed like they usually do when the array is not mounted. This time I did notice that when I ran "losetup", only 2 options came up and not 3 like every other time. I clicked on the SHUTDOWN button to see if it would shut down the system this time, and it did. Facts are that I cant seem to get to stop the array, but if the system is shutting down, I guess thats a win for now. I will keep testing this every day twice a day see if anything changes. haberworld-diagnostics-20231010-0811.zip

Shows "not mounted" while I am trying to STOP the array. (I did the steps before just dont have a SS of it, bit if you need it I can do another STOP the array to test it out).

It does not work either I cant at all stop the array. I just dont know what I can do about it. Uploaded another diagnostics file while the array is just stuck on, "RETRY UNMOUNTING DISK SHARE(S)" haberworld-diagnostics-20231009-0806.zip

Thanks for the info. I had tried that before. I should have posted it. This is what I got, it seems that libvirt might still be running? I tried some commands but still nothing.

Good day all. I started my Unraid from scratch the other day due to some user error issues. All good, I got new disks for ZFS pools so I was not that disappointed. Luckily Unraid is smart and I can use the same disks so I didn't lose any data, just time setting up. I also used some backups from app Backup/Restore appdata. Worked well from what I can see. Oct 7 07:21:03 haberworld emhttpd: shcmd (819806): /usr/sbin/zpool export cache Oct 7 07:21:03 haberworld root: cannot unmount '/mnt/cache/system': pool or dataset is busy Oct 7 07:21:03 haberworld emhttpd: shcmd (819806): exit status: 1 Oct 7 07:21:03 haberworld emhttpd: shcmd (819807): /usr/sbin/zpool export fast Oct 7 07:21:03 haberworld root: cannot unmount '/mnt/fast/appdata': pool or dataset is busy Oct 7 07:21:03 haberworld emhttpd: shcmd (819807): exit status: 1 Oct 7 07:21:03 haberworld emhttpd: Retry unmounting disk share(s)... Oct 7 07:21:08 haberworld emhttpd: Unmounting disks... Oct 7 07:21:08 haberworld emhttpd: shcmd (819808): /usr/sbin/zpool export cache Oct 7 07:21:08 haberworld root: cannot unmount '/mnt/cache/system': pool or dataset is busy Oct 7 07:21:08 haberworld emhttpd: shcmd (819808): exit status: 1 Oct 7 07:21:08 haberworld emhttpd: shcmd (819809): /usr/sbin/zpool export fast Oct 7 07:21:08 haberworld root: cannot unmount '/mnt/fast/appdata': pool or dataset is busy Oct 7 07:21:08 haberworld emhttpd: shcmd (819809): exit status: 1 Oct 7 07:21:08 haberworld emhttpd: Retry unmounting disk share(s)... My issue is that i cant ever STOP the array now. It is always stuck on "RETRY UNMOUNTING DISK SHARE(S)". After a Google search, I found this thread: https://forums.unraid.net/topic/141479-6122-array-stop-stuck-on-retry-unmounting-disk-shares/#comment-1283203 I read it and did try some of the things based on the info provided by `ljm42` , I should be able to run a command like `umount /var/lib/docker` and as he said "The array should then stop and prevent an unclean shutdown." So looking at my logs, I did ` umount /usr/sbin/zpool ` but output was ` umount: /usr/sbin/zpool: not mounted. ` so then i tried ` umount /mnt/cache/system ` but output was ` umount: /mnt/cache/system: target is busy. ` Does this mean I have to HOLD the power button on my system every time I want to stop the array? I have uploaded my diagnostics file, hopefully this is enough to understand whats going on. Thanks for your time. haberworld-diagnostics-20231007-0721.zip