unr41dus3r

No sadly not, but i think with latest unraid and netdata version, i dont see the error anymore.

Yeah, i got it now and i also experience the 20W It should be going lower with ASPM but i couldnt achieve it at the moment with Core Kernel. ASPM is enabled in Bios.

Habe Testweise mal einen 30W Verbraucher (3 Netzwerkdevices) dran gehabt und am Eingang wurden dann ca 45W verbraucht. Also in der Region würds schon ungefähr passen. Müsste nurmal testen mit einen Verbraucher der viel Leistung zieht. Habe 4 Shellys an der USV und 1 Shelly beim Eingang. Die 4 Zusammengerechnet ergeben meist 200W und der beim Eingang steht dann oft bei 290W Habe aber auch schon ein altes "dummes" Strommessgerät am Eingang angehängt und kam da soweit ich mich erinnere zum gleichen Ergebnis. Ich werde die Tage nochmal testen. Edit: Grade die History Files angesehen (hatte nen tasmota plug und shelly) einige Zeit paralell am Input laufen. Die haben die gleichen werte. Sprich was die USV zieht und der Shelly anzeigt ist korrekt. Kann es sein dass die USB solch eine Verlusstleistung hat?

Hey Leute, habe die Eaton USV Ellipse ECO 1200 USB DIN im Einsatz. Braucht ca 14W im IDLE ohne Verbraucher. Was mir aber aufgefalleen ist und befürchte das ist normal? Wenn meine Verbraucher drauf ca 200W brauchen, steht an meinen Powermeter (Shelly) ein Verbrauch von ca 290W am USV Hauptanschluss

I hope, but still then this should also documented. Sorry if i overreacted a bit, but while debugging such things makes it much harder to resolve

Hi, today my USB Drive died and i had to replace it. I had an backup and after booting up, Unraid told me that it is a different USB drive then before and my key is not working. Ok i thought, i heard about it that it is possible to replace a USB Drive and reuse the old key. It was not for me clear how i can fix this really fast and searched the net. I found the documentation, but had still a problem. Replacing the key never showed up after login, as i was told in the documentation. https://docs.unraid.net/unraid-os/manual/changing-the-flash-device/ At the end i needed more searching and found out, i need the "Unraid Connect" plugin installed. PLEASE, many people are extremely stressed in case of a crisis and this needs to be documented anywhere. Maybe i couldn't find it but this could be really easy overlooked. Best regards

Maybe someone has an idea, i got an Intel Arc 380 and ASPM in Bios is enabled and i also seewit lapci ASPM is enabled. I try now to get them to lowest state and in Powertop i see it is in RC6 state but not going to RC6p or RC6pp. Any idea what i could try? I am also using custom Thor Kernel for the use of ARC, but as i know the RC6 states are normal for intel? My C states are only from 1-3 but as i read its normal in powertop for AMD CPUs

Sorry, if i missed it in the thread, but has anybody information about the IDLE Power Draw of an A310/A380 or A750 ? I am thinking to get an ARC but the most important thing would be the IDLE Power draw and maybe some power in reserve with the A750, but i dont know if there is any difference in the IDLE Power draw handling?

Yeah thats true, but it still would be nice for example a global setting, when to run a daily job or for minimum to show (documentation) when the job will be executed as daily job. An idea as another feature request, show in the GUI when the script was the last time executed, that would clarify the above problem. So the user can check when was the last time the script ran and you also know when a daily/monthly script will be executed.

Hi, i wanted to ask about an ETA for the new release? It would be really nice if i dont need to use the command every time per CLI. Thanks

Thanks for checking Output: zfs list -H -o name,mountpoint backup-ssd /mnt/disks/backup-ssd backup-ssd/backup /mnt/disks/backup-ssd/backup zfs mount backup-ssd /mnt/disks/backup-ssd

I updated to the latest plugin version and today i stopped the array and started it again (without reboot) It was again necessary to run zfs mount -a

Created a bug report in UD Thread and it is fixed in latest version.

Hey i want to limit the max Memory / Resource Usage for the Docker Engine. I have enough RAM in general but had an Memory leak in a Docker which nearly killed my System/Host I dont want to configure a memory limit for every container, so it would be best to set it for the complete engine. I found this for other systems and i thought it would be nice if this would be possible in a easy way for unraid https://unix.stackexchange.com/a/550954 Regards

Thanks for your Answer, i think i will put an feature request in the forum Dont like to moify to much and have problems later after updates for example. Edit:

The Disk was partitioned with Unassigned Devices with an Single encrypted ZFS Partition. I created afterwards a ZFS Dataset with CLI and with ZFS Master Plugin. zfs list: NAME USED AVAIL REFER MOUNTPOINT external-ssd 935G 864G 112K /mnt/disks/external-ssd external-ssd/dataset1 935G 864G 932G /mnt/disks/external-ssd/dataset1 external-ssd/dataset2 935G 864G 932G /mnt/disks/external-ssd/dataset2 The disk would stay as Unassigned Disk Device, i dont want to move it into an array

Short question, i have an encrypted ZFS Partition on which i have a dataset. The partition is mounted correctly but the dataset is not mounted and i need to run "zfs mount -a" to mount it after every reboot. What would be the recommended way to automate this?

The datasets on my Array Cache Drive is mounting correctly, but on my unassigned Devices Disk where i created some datasets are not mounting. I created the ZFS Disk with the unassigned devices and configured the datasets with ZFS Master

Maybe a Noob ZFS question, but i have to run "zfs mount -a" after every reboot to mount my zfs datasets again. Is this by design or an configuration mistake by me?

Feature Request: Show the Time and Date when a default time frame is chosen. "Daily" Every Day @ 00:01 "Weekly" Every Sunday @ 00:00 and so on. At the moment i dont know which time frame is set. Show the information where you would put the custom cron for example.

Hi, i dont know if this normal behavior but i use ZFS on an unassigned devices Drive. On the drive zfs partition are 2 Datasets, which are mounted fine. But after an reboot both datasets are not mounted (the unassigned devices parittion is mounted) After an "zfs mount -a" both datasets get mounted as before the reboot. Is this a normal behavior? Should i set an usercript for the unassigned device to run the "zfs mount -a" command or is this something else?

Hey i wanted to ask what would be the best way to limit the max Memory / Resource Usage for the Docker Engine. I have enough RAM in general but had an Memory leak in a Docker which nearly killed my System/Host I dont want to configure a memory limit for every container, so it would be best to set it for the complete engine. I found now this guide for ubuntu, would this also possible on unraid or would there be a better way? https://unix.stackexchange.com/a/550954 Regards

I dont know if this is possible but i have a feature request. Is it possible to add an button to the folder to ONLY start containers that are set to "Autostart" ? This would be extremely helpful when i have to do maintanance.

Hi, sometimes need to change some mandatory settings for my containers and before i want to go back into productive state i would like to test the settings (for example changing network settings) I have for many containers Autostart enabled and i would like to have the same settings after my testing. Other Situation, if, for example, a crash happens and i dont want to start all containers again before testing something. Would be great if there would be a setting in Docker Settings next to enable/disable service, a Autostart Settings or save the Current State of all Autostart Containers. Procedure at the moment when i want to change something mandatory. At the moment i need to disable all Autostarts for my containers (before disabling Docker Service), then i can Disable the Docker Service -> do the Config Changes -> Start Docker -> Test single Container -> when everything works, enable again Autostart for specific containers and boot them manually or again disable and enable the Docker Service to start all Containers Regards

Ok thanks for testing this. I will try it again with your ruleset