D'n'S137

I Backedup my data from the System(in SafeMode with GUI) to another Drive, to do so i had to take one of the CacheDrives out of my System, because otherwise i ran into an licence issue. I noticed since the hole copying process my system runs fine. So i gave it a try put the CacheDrive back in and rebooted the system. After like 1 and a half hour the system crashed again. I removed the CacheDrive again and rebooted into SafeMode with GUI started the array an let the system run. After 17 Hours the system crashed again right next to me. So it beeps twice and then reboots without warning or any singn of shutdown script. The screen goes black, it beeps twice and reboots. maybe a hardware error or an stability issue from the Mainboard config. I will do some further Testing: Run some Memtests Play with CPU voltage an clock in an attempt to stabilise it Play with MemoryClocks(maybe slowing it down?) Open Questions to me: Is it even possible that this is an GPU error? If yes how to test the GPU? Is there an benchmark software/OS to use for hardware tests? Maybe someone can help me with one of those questions. Kindly Greetings

Dec 4 22:22:52 MPS kernel: mce: [Hardware Error]: Machine check events logged Dec 4 22:22:52 MPS kernel: mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 5: bea0000000000108 Dec 4 22:22:52 MPS kernel: mce: [Hardware Error]: TSC 0 ADDR 1ffff8114fef2 MISC d012000100000000 SYND 4d000000 IPID 500b000000000 Dec 4 22:22:52 MPS kernel: mce: [Hardware Error]: PROCESSOR 2:800f11 TIME 1607116951 SOCKET 0 APIC 2 microcode 8001138 Dec 4 22:22:52 MPS kernel: #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15

Hello everyone, Im Runnig Unraid 6.8.3 on an AMD RYZEN 7 1700 with 4x2TB HARD Drives(1Parity) and 2xSSDs(for Cache) 1SSD is 128GB and the other one is 256GB. For Memory i have 32GB of DDR3 2144MHz RAM non ECC. The Mainboard is a Gigabity B450 AORUS ELITE. (works like a charm) For the GPU i got an old EVGA GTX 980TI Hybrid and an MSI GTX 710. Plugins: Nerdpack ZFS(not in use) NVIDIA UNRAID(not in use) DenyHosts userScripts upnp-monitor fix-common-problems parity-check-tuning gui-links(not in use) dynamixsystemtemp dynamixCacheDirs dynamixActiveStreams community applications disableSecurityAMD turboCache moverTuning dynamixSSDtrim I had some problems in the past few day and checked many different ways. Now i am at some point where i have to talk to you. So my System was runnig great now for 85days. Some Weeks ago it started to randomly crash and become unresponsive. No WebGUI, no CLI, no reaction when using the keyboard and no reaction when pressing the Boot/Start button on the Chassis. So i did my research and figured out AMD processors have to be set in BIOS to "typical current idle", changed it and it ran for some days. Since these changes, the server randomly reboots. So i changed the CPU freqency tuning settings from "Auto" to a normal fixed Value. Then ist did work for some days and now it randomly reboots again. Since i had no other Idea and it is getting a little bit anoying. I hope someone can help me out at this point. Please see my Diagnostics attached. In the Syslogfile you will notice there is some Hardware Error with the CPU but i am not quite sure what the this means in detail. Greetings and stay healthy. mps-diagnostics-20200524-1440.zip

So i found this Solution: Now testing this, maybe this was the issue.

Hey klingherit, i am faceing the same Problem so did you find any solution?

Just looked into it seems crazy what is needed to run a farming simulator server.

What about a Farming Simulator Server? Like to see this one and should not be to complicated.

Hello Unraid Members, As Squids Common issues plugin showed. I have the CPU Scaling features not implemented and I'm curious, because some days before, i did an BIOS upgrade which set my BIOS settings back. Before my system was working at 25-35W per Hour now I am at 70-110W. I had made some other changes so this doesn't have to be the issue but it could help in some ways. Greetings and stay healthy.

Nice job. I will have look on this. Maybe set another name because Hernanditos CA App looks exactly the same way. Stay healthy.

Hey, Go to docker page. Make sure there is the docker hub page in the Repository list: https://hub.docker.com/ Click on add Container give the Container a Name. As repository set "google/cloud-sdk"(without "" and it is case sensitive) Set the variables, path and everything else as described in docker hub and hit apply. https://hub.docker.com/r/google/cloud-sdk/ Greetings, stay healthy

Why not use PhotoPrisms docker? Compose https://hub.docker.com/r/photoprism/photoprism/ Manual from Documentation https://docs.photoprism.org/getting-started/docker/ Greetings stay healthy.

Exactly. Just remove one of the Cables, if possible, and try again. Or stop all containers go into the docker settings and remove one of them by deselect them.

Thank you for posting your answer. It's always a good step, to look into the logs most services know what they need [emoji16][emoji106]

Do they only use 172.17.0.2? Or is it set like: 172.17.0.2:80 192.168.1.2:80 You can have a look in the Docker Tab. But as I mentioned before please have a look at the advanced docker settings if there are more than one network set within the same Subnet, there is your Problem.

Sounds good, and what networks did you configure? Did you run at some point 'docker network create'? As I mentioned before this will setup a network using the 172 as the first octet for the Network Subnet.

Just look into YouTube Spaceinvader One did a great video of the hole Story Gesendet von meinem Pixel 3a XL mit Tapatalk

Sorry for the late answer you can check your log just after starting the docker from the Unraid Docker Tab at the right by pressing the symbol that looks like a written pice of paper these logs are live when your docker is running. By looking into the logs it seems like RocketChat cannot find your mongoDB, you have to have a installed mongoDB docker/server running if you want to run a RocketChat docker/server, if you already have one installed check the Network connection both docker/servers have to be on the same Subnet. Gesendet von meinem Pixel 3a XL mit Tapatalk

Check at Settings -> Docker -> upper right switch to advanced view What Networks are set? Seems like one is overlapping maybe a Subnet typo or using a Subnet like the standard 172 Network. Gesendet von meinem Pixel 3a XL mit Tapatalk

1 I do it manual 2 check the container logs, any crash information? Any warnings? 3 I would suggest a problem with your Firefox container maybe try it from a real PC with the newest Firefox version. Gesendet von meinem Pixel 3a XL mit Tapatalk

Hello Guys, Rocket.Chat up and running everything is fine. Are you planning to Update the Docker Container to the newest Version? If so when are you planning to release these Update?

Okay so Thanks for your advise. I disabled C-States and SMT features, since i had no Problems at all. But i was wondering why can i run the Server for some days bevor and now i get these errors, because C-States were active all the time.

Thanks for your experience report. It leads me to search for my Problem at AMD, some other people had similar issues with the same CPU it seems to be a Problem with the C-States and the SMT feature so I disabled C-States in my BIOS. Now I am testing if this solved my Problem. But I will reach out for the AMD support because it seems like they know the issue, with these Ryzen 7 1700(x) CPUs. Gesendet von meinem Pixel 3a XL mit Tapatalk

At last boot i got no errors after two hours the system crashed again i had to reset the system(hard shutdown). Today i booted the system an got some errors in the LOG see below: May 24 17:36:58 MPS kernel: Warning: PCIe ACS overrides enabled; This may allow non-IOMMU protected peer-to-peer DMA May 24 17:36:58 MPS kernel: tsc: Fast TSC calibration failed May 24 17:36:58 MPS kernel: ACPI: Early table checksum verification disabled May 24 17:36:58 MPS kernel: mce: [Hardware Error]: Machine check events logged May 24 17:36:58 MPS kernel: mce: [Hardware Error]: CPU 4: Machine Check: 0 Bank 5: bea0000000000108 May 24 17:36:58 MPS kernel: mce: [Hardware Error]: TSC 0 ADDR 1ffff8168b28a MISC d012000100000000 SYND 4d000000 IPID 500b000000000 May 24 17:36:58 MPS kernel: mce: [Hardware Error]: PROCESSOR 2:800f11 TIME 1590334600 SOCKET 0 APIC 8 microcode 8001138 May 24 17:36:58 MPS kernel: mce: [Hardware Error]: Machine check events logged May 24 17:36:58 MPS kernel: mce: [Hardware Error]: CPU 8: Machine Check: 0 Bank 5: bea0000000000108 May 24 17:36:58 MPS kernel: mce: [Hardware Error]: TSC 0 ADDR 1ffff8168b28a MISC d012000100000000 SYND 4d000000 IPID 500b000000000 May 24 17:36:58 MPS kernel: mce: [Hardware Error]: PROCESSOR 2:800f11 TIME 1590334600 SOCKET 0 APIC 1 microcode 8001138 May 24 17:36:58 MPS kernel: floppy0: no floppy controllers found May 24 17:36:58 MPS kernel: ccp 0000:07:00.2: psp initialization failed May 24 17:36:58 MPS kernel: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20180810/utaddress-204) May 24 17:36:58 MPS kernel: ata5.00: failed to enable Sense Data Reporting, Emask 0x1 May 24 17:36:58 MPS kernel: ata5.00: failed to enable Sense Data Reporting, Emask 0x1 May 24 17:36:58 MPS kernel: ata6.00: failed to enable Sense Data Reporting, Emask 0x1 May 24 17:36:58 MPS kernel: ata6.00: failed to enable Sense Data Reporting, Emask 0x1 May 24 17:37:11 MPS rpc.statd[1972]: Failed to read /var/lib/nfs/state: Success Do i have a bad CPU? Are there any reliable hardware test? I bought the CPU *used* to save a bug, maybe this was a scam/mistake.

Hello all, My Situation: fresh System installed since 3 Month with new UNRAID V6, works fine for weeks, used Docker(lancache, folding@home, jdownloader[query downloads with slow internet]) also used VMs Windows and Linux and i had have some SMB and APF shares. Problem: My system crashes randomly after some time, even with no docker and no VMs started. When the system crashes it needs to be shutdown manually, i can´t login to the webUI and also the console is not responding but i still get my hourly Array Status and can ping the systems IP-Address. I have inserted an USB-Networkcard, i will make a test without it. - No change! - In the logs Folder there are no logs. Greetings mps-diagnostics-20200524-1440.zip

"more parity" = "more parity drives"