Seven7527

Members
  • Posts

    28
  • Joined

  • Last visited

Everything posted by Seven7527

  1. So basic question but I want to make sure I am getting it right. I have my Media filling up 1 of my disks. In the share settings for the drive. If I want to set the minimum level of free space say 10 gigs. it is set to 0KB by default. Would I just put 10G in the space or 1.25e+6KB?
  2. So i noticed that I now have this problem after going from 6.8.3 and umping to 6.11.3. Mine will go from 110F to 122F 3 or 4 times a day. And i feel like is not doing anything? I have plex, Sonarr ,Radar and Homa Assistant VM running. I thought it was Tdarr that was doing but I only have Tdarr run for 3 hours each night at midnight to 3am. Any ideas what else I would do? Running 2 in a pool for cache Samsung SSD 970 EVO Plus 2TB on a Asus TUF GAMING X570-PLUS motherboard AMD Ryzen 5 3600 6-Core @ 3600 MHz
  3. Is there anyone running the offical Plex Docker? So this morning I made the jump from 6.8.3 to 6.11.1. and the only container not working was Plex. I thought I had the official container with Nvidia plugin for transcoding and after the second reboot of my server the container was just gone. but when I tried to download a new container the parameters where not the same. I feel like I have to rebiuld my plex server? I did not lose any of my movies.
  4. I can't figure it out. I whipped everything clean and tried to start over but once I get the container up and running it keeps telling me "Unable to connect to Unmanic backend. Please check that it is running". in the WEBUI I don't know what I am doing wrong ?
  5. Thank You for the help with rolling back to 2021.08.31 because I am still on OS 6.8.3. My only question is nothing comes up for updates now. Is there something I can do to apply updates? Docker apps.pdf
  6. So I am very self taught and am on 6.8.3 ( I am not ready to update to 6.9.2) and my community app auto updated. How can I roll back the Community app to the last update?
  7. So I just wanted to see if anyone could help me with Handbrake to do GPU transcoding? I can't figure out why its not working. I am running 1.3.3 jlesage/handbrake.
  8. So I can't figure it out Krusader just stopped and will not stat up " Execution error Server error" I deleted the container and image. redownloaded and still got errors? Pulling image: binhex/arch-krusader:latest IMAGE ID [1584543365]: Pulling from binhex/arch-krusader. IMAGE ID [ae8bad35e085]: Pulling fs layer. Downloading 100% of 263 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [6bc503260a9b]: Pulling fs layer. Downloading 100% of 3 KB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [ff3d0022ca4c]: Pulling fs layer. Downloading 100% of 656 KB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [85aa5e1255ae]: Pulling fs layer. Downloading 100% of 5 KB. Download complete. Extracting. Pull complete. IMAGE ID [8bacc57869e2]: Pulling fs layer. Downloading 100% of 200 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [ec6f6c69a3f8]: Pulling fs layer. Downloading 100% of 257 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [1500e8724f76]: Pulling fs layer. Downloading 100% of 3 KB. Download complete. Extracting. Pull complete. IMAGE ID [126e5351561a]: Pulling fs layer. Downloading 100% of 2 KB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [6d3a32195c50]: Pulling fs layer. Downloading 100% of 7 KB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [d063dd4313f2]: Pulling fs layer. Downloading 100% of 223 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [e7056b8d6ffa]: Pulling fs layer. Downloading 100% of 3 KB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [142d66edd625]: Pulling fs layer. Downloading 100% of 1 KB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [b418ca599391]: Pulling fs layer. Downloading 100% of 170 MB. Verifying Checksum. Download complete. Extracting. Pull complete. Status: Downloaded newer image for binhex/arch-krusader:latest TOTAL DATA PULLED: 593 MB Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='Krusader' --net='bridge' --privileged=true -e TZ="America/Chicago" -e HOST_OS="Unraid" -e 'TEMP_FOLDER'='/config/krusader/tmp' -e 'WEBPAGE_TITLE'='Server Vader' -e 'VNC_PASSWORD'='' -e 'UMASK'='000' -e 'PUID'='0' -e 'PGID'='0' -p '5900:6080/tcp' -v '/mnt/':'/Unraid':'rw,slave' -v '/mnt/user/appdata/kde/':'/nobody/.kde':'rw' -v '/mnt/disks':'/Unassigned':'rw' -v '/boot/':'/Flash':'rw' -v '/mnt/user/appdata/binhex-krusader':'/config':'rw' 'binhex/arch-krusader' 52ae088c434497cd886102e6518333e6be685d0e586580330773da08a9b149c9 /usr/bin/docker: Error response from daemon: driver failed programming external connectivity on endpoint Krusader (54ad302b760c34afb4011205dcc5deabbb2f367d5b560213d38c6ba6e7af312c): Error starting userland proxy: listen tcp 0.0.0.0:5900: bind: address already in use. The command failed.
  9. So my question is I am on 6.8.3 and watched Spaceinvaderone youtube about creating a windows VM. It works fine but if I try to add my graphics card the VM crashes. I thought about it and I am using the old and now depracated Unraid Nvidia plug-in for plex transcoding when I need it. ( I plan to move to 6.9 one day just to scared it will mess everything I have worked to build). Is using the Nvidia plug-in for plex not allowing me to add my graphics card to the windows VM? Do I need to buy a second graphics card for my VM"s if I want to use one?
  10. Just would like to be able to listen on Downcast or anything but Spotify
  11. So I just wanted to check. I still am on 6.8.3 I don’t want mess up my VM (the took for ever to build correctly, self taught). Wanted to see if anyone has had problems going from 6.8.3 to 6.9.2. I asked on a facebook group and had 2 people tell me If you are using host network and/or static ips for docker, that could cause the repeated kernel panics. I do have port forwarding on my router for a few docker apps and Home Assistant VM and they do use the same IP address as the Unraid server. So I did not know if that was going to be a problem for me? I was going to follow SpaceInvaderOne’s recommendation to upgrade.
  12. ?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>Gaming rig</name> <uuid>9388ad92-c504-0780-3e59-e31bc10b1613</uuid> <description>Gaming rig</description> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>2</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='6'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-4.2'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/9388ad92-c504-0780-3e59-e31bc10b1613_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='1' threads='2'/> <cache mode='passthrough'/> <feature policy='require' name='topoext'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Gaming rig/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Win10_20H2_v2_English_x64.iso'/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.173-2.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:4b:65:01'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </memballoon> </devices> </domain> W10 Gaming
  13. So I am trying to create a gaming VM. I have a Windows VM up and running after following Space Invader One. except I Can not use my graphics card. If I try to add it the VM crashes when I try to start it up. its a Gigabyte GTX 1650 Super. So I am trying to create a 2nd VM ( and have not added a graphics card to it yet )of windows 10 but when I go to create it I just get this (in the pic below). I should also mention I am very self taught. I have leaned this all reading and watching videos. Thanks
  14. So When I use Fix common Problems I get "Share appdata set to cache-only, but files / folders exist on the array" You should change the share's settings appropriately or use the dolphin / krusader docker applications to move the offending files accordingly. So what is the appropriate setting for the appdata? Am I missing something else?
  15. 1. I get the warning below. And not quite sure how to fix it? if I set appdata to Use cache (for new files/directories): to Only Cache If the appdata share is not set to be cache-only, then the mover program will cause your docker applications to become inoperable when it runs (6.1.x). Under 6.2+, this setting should not affect the operation of the application, but it will definitely impact significantly the performance of the application. Fix it via 2. After seeing to appdata to Cache only I get this Share appdata set to cache-only, but files / folders exist on the arrayYou should change the share's settings appropriately or use the dolphin / krusader docker applications to move the offending files accordingly. Note that there are some valid use cases for a set up like this. In particular I am bit confused as how to proceed
  16. i hope i am posting this in the correct spot. Forgive me if I am not. So I have been trying to learn to add H.A to homekit. last night I made some things to exclude from H.A to homekit in the .yaml file. I do not have no experance with changing the .yaml file but i checked it before doing it and rebooted with no problems. then this morning I went to try to get to home assistant on my main computer and just got a blank screen. reloaded the VM and now it will not start. Execution error. Internal error: did not fing USB device 1cf1:0030. I am not even sure if this is related to me messing with the .yaml for homekit tried to create a new VM with the same.qcow2 file but could not get it to load. unable to load. I did have it set to Duckdns when I first set it up. I have no experance in this just watched a lot of youtube videos
  17. OK fixed my own problem. using Krusader and deleteing the music file in the Media: share. then I could change the name of the Media: to Just Media and delete it and that fixed everthing
  18. I am newbie but I was messing around and creating some docker containers for Headphones. I created a Media share (Media:). and now I can not take take the arrey offline or shut down properly. also I can not go into the unraid machine threw the network to delete the Media: share. I get " This file server will not allow any additional users to log on. try to connect later". I can only get threw using GUI on safari web browser. also on the bottome left of the screen where it says "Array started" IT keeps flashing " Starting Services". I ran Fix common problems and this is what I got 'Share Media: contains the : character which is an illegal character on Windows / MAC systems." I pull up the log and this keeps repeating .I hope some could please help 07072020_1613PM_MacinaboxCatalina.xml
  19. *** moderator - split from Docker FAQ, where it was obviously off-topic *** I need help with Lidarr. Have everything set up but. I get the (Error Failed to import track, Permissions error). I can't figure out what I am doing wrong? here are my logs [Info] AppFolderInfo: Data directory is being overridden to [/config] [Info] Router: Application mode: Interactive [Info] MigrationLogger: *** Migrating data source=/config/lidarr.db;cache size=-10000;datetimekind=Utc;journal mode=Wal;pooling=True;version=3 *** [Info] MigrationLogger: *** Migrating data source=/config/logs.db;cache size=-10000;datetimekind=Utc;journal mode=Wal;pooling=True;version=3 *** [Info] OwinHostController: Listening on the following URLs: [Info] OwinHostController: http://*:8686/ [Info] LidarrBootstrapper: Starting Web Server [Warn] MonoDebugCheck: Mono is not running with --debug switch [Info] RssSyncService: Starting RSS Sync [Info] DownloadDecisionMaker: Processing 498 releases [Info] RssSyncService: RSS Sync Completed. Reports found: 498, Reports grabbed: 0
  20. So I can't get anyone to answer my question involving LIdarr docker conatiner. I have no problem setting and it downloads the tracks. But it will not import any of the tracks. I get this error. does anyone know how I could fix this? I have radarr and Sonarr running with no issues Failed to import track, Permissions error 08-fiona_-ladies.mp3
  21. I could really use some help. I am new to this. Have everything set up but. I get the (Error Failed to import track, Permissions error). I can't figure out what I am doing wrong?
  22. I have a download folder in my shares and somethings I can not delete some of the files from my iMac. What is the best way to fix the perssions so I dont have to always load Krusader to delete things from a folder? I just want to be able to delete from my Mac by loading my server threw the network
  23. I am trying to get plex preRolls to work but I discovered I do not have the file of my prerolls set to Nobody. I am having the hardiest time trying to understand how I can change that? any help please
  24. So I watched SpaceInvaderOne video on creating Mac OS VM. and wanted to add my Gpu to it. but everytime I do it crashes. I see in the coments below the video on how people fixed it with ajusting XML file. but it will not even boot when I try after adding the GPU. I am afraid to try to add my GPU to my Windows VM for fear of the work to get it setup and then I would have start all over agin. Am I mssing something? On my mother board I did emable IOMMU in the BIOS. here is what I am working with. any help thanks ASUSTeK COMPUTER INC. TUF GAMING X570-PLUS (WI-FI) Version Rev X.0x AMD Ryzen 5 3600 GeForce GTX 1660 Super