xxnumbxx

Finallly got around to taking care of this. This fixed my problem. Just swapped out the cache drive and formatted xfs. All good now. Thank you.

Just the cache pool or do I need to convert all pools? Planning on building a new server in a couple months so don’t want to redo everything right now.

I have been having some problems with docker images lately. The dockers seem to randomly freeze and I am unable to reboot from the unraid GUI. GUI becomes almost unresponsive. I have had some luck restarting the computer, things seems to work for a little bit. The other day however my docker.img seemed to be corrupted. I ended up recreating the image. Things seem to work ok for a few days however now I am getting the following errors. 1. Drive mounted read-only or completely full, 2. Docker Image either full or corrupted I read the FAQ from common problems thread and my problem seems different. My drives are definitely not full and my Dockers seem to have the correct paths associated to them. This has been working just fine for a long time and problems started happening recently. Any help would be appreciated. Diagnostic attached. europa-diagnostics-20231118-0822.zip

I have been running unraid for about 10 years now. Currently on v6.11.5. Unraid is running on the below specs. Anytime Sabnzbd begins to unpack or move a download my server is crippled. CPU's are running approx max 50% of total usage. Some cores are maxed at 100% others have nothing. I tried pinning CPU's to help with load and no change. When this is happening Emby won't play any other videos and even the unraid GUI is very slow and difficult to access. I would think my server is more than capable of running multiple operations without issues. Maybe I am wrong here? Wondering if anyone else has this issue or not? Any suggestions to fix this. I would hate to setup another server just to run emby. Any help would be greatly appreciated. Server Specs Dell R730xd Dual E5-2640 v3 @ 2.6ghz 192gb DDR4 Ecc Ram Dell Dual 10Gbps NIC Nvidia Quadro p2000 GPU - for transcoding emby and tdarr files 4 Dell 10k server HDD @ 6TB 4 WD Nas Pro HDD @ 6tb (2 as parity) 2 Samsung 1tb 870 Evo SSD (2 as parity cache drives) Dockers Running bazarr binhex-radarr binhex-sonarr binhex-prowler binhex-sabnzbd emby ombi unifi-controller borgmatic heimdall speedtest-tracker VM's Home Assistant

This is it. Set to strict all good now. Thank you.

Is anyone else having this problem? I checked on my backup server at another site and same problem.

I am attempting to access my server via https://tower.local and https://<serverip>. On previous versions it would redirect to provisioned cert https://xxxxxxxx.myunraid.net/Main. Now I am prompted with an ssl not secure prompt. I attempted to turn off ssl/tls and turn back on. Re-provisioned the cert still no go. If I go directly to the https://xxxxxxxx.myunraid.net/Main link it works correctly. Not sure if anyone has a fix for this or ran into this problem?

Ya mine is very slow then. It took about 12hours to do 880GB. I am creating an initial backup not sure if it takes longer the first time. What could I do to increase backup speed?

Curious what time of speeds people are getting with their backups? I am using borgmatic to backup to a remote server via ssh. Speeds are approx 20Mb/s. I have tested both with iperf and copying files to the remote server and reach speeds of 110+Mb/s. Are there any tips to increase the speeds? I was considering running an additional instance of borgmatic to backup seperate repos but this just seems redundant.

Any ideas?

I have two servers one running 6.9.2 and my backup server is on 6.10-rc7. When attempting to connect from the backup server to my primary, I get the below error. When doing the inverse everything works correctly and no errors reported. I have tried deleting the .ssh folder from the flash/configs and recreating the connection but the problem persists. Also tried resetting permissions, still a no go. Any idea what causes this? It does seem to allow the connection I just don't like errors. Thanks in advance for any help. root@XXXXXX:~# ssh 10.10.1.2 Enter passphrase for key '/root/.ssh/id_ed25519': hostfile_replace_entries: link /root/.ssh/known_hosts to /root/.ssh/known_hosts.old: Operation not permitted update_known_hosts: hostfile_replace_entries failed for /root/.ssh/known_hosts: Operation not permitted

Does anyone know how Borg works in regard to deduplication, specific to files of the same name. I am curious of photo backups specifically. Will it determine files of the same name and check if the are different files. My camera repeats the names of files and I want to make sure all photos are retained regardless of file names.

I tried this thinking the same thing. I created a new repo and it still backs up the recycle bin folder. SOLVED: for anyone else with this problem I was able to exclude using **/.Recycle.Bin

How do I get exclude patterns to work? I have the recycle bin plugin installed it adds /.Recycle.Bin to each folder. I have tried every combination I can think of and it still backs it up. exclude_patterns: - '- [Tt]rash' - '- [Cc]ache' - '- */.Recycle.Bin' - '- /.Recycle.Bin'

This worked although not sure the cause. I never moved the repo. Only difference is omitting the user prior to the ip. Thanks for your help.

Wondering if someone can give me a hand. I am trying to backup to a remote server also on unraid. I successfully created my ssh keys and init the repo. However the backup fails to run via 'borgmatic create -v 2 --files --stats'. I also tried to just manually create a test backup via 'borg create --stats [email protected]:/mnt/user/borg_backups::Test ~/mnt/user/music' and it fails with similar errors. Not sure what I am doing wrong. I can get borg to work fine via the nerdpack plugin but would like to use this docker. I have attached the errors below. TIA Borgmatic Response: Manual borg create: My Config.yaml

1. Cache drive is not required to boot into Unraid GUI. Sounds like you may have overheated m.2 drive, causing possible failure. It is also possible your board is triggering thermal protection or will not boot do to a bad fan. It is unlikely the USB failed as well. 2. If cache is dead and you do not have a backup of appdata folder you will need to install any dockers and there respective configs from scratch. As long as your cache drive is not encrypted (provided it is not bad) the data would be accessible. How you access this would depend on its file system. I would try removing the m.2 from the system and see if you can get things to boot.

Did you try loading a fresh unraid USB without your config. Just leave everything default. If that won’t load you have a hardware issue? Maybe RAM? Also try resetting Bios to defaults.

Can’t believe I missed this. Thank you.

I run a 10Gbe card as the Unraid Primary and Dockers. I use the second 10Gbe card for Vm's. I wouldn't waste my time with bonding. I had nothing but trouble. Others may have other experience but bonding just didn't work great for me.

Pull all your drives and cards and see if you can get to boot into GUI.

When I access the web gui viamy server ip, it resolves to ********************.unraid.net/dashboard. Not sure what changed for this to happen? Guessing something with the MyServers plugin? How do I change this back to just resolve from the servers ip. Pretty sure its connecting via SSL, where is the setting to turn this off? Thanks

You need to change the adapter setting for eth2 to eth0 so unraid uses it. If you go to setting->network setting you should see the below settings. Change the NIC Mac for eth2 to eth0 and reboot. Unraid will then use your 10Gb connection.

I thought iperf3 caches to memory so the hdd is irrelevant. But I am pulling from an SSD.

Yes you are bonding your connections. Change bonding mode to no, and change bonding members to eth0.