Hi there,
First off, thanks for the development effort that went into putting these images together.
I am using openvpn-hyrosa using bridge network.
The image starts but the logs show that the no servers are reachable:
[info] Config file detected...
[info] Setting variables
[info] Set various ports to docker variables
[info] Determine openvpn port from config file
[info] Determine openvpn protocol from config file
[info] Will connect openvpn on port=1194 proto=udp
[info] Determine eth0 network for nftables
[info] eth0 IP is 172.17.0.4 in network 172.17.0.0/16
[info] All variables set
[info] Fixing configs
[info] language fixed.
[info] root folder fixed.
[info] launcher fixed.
[info] stubby fixed.
[info] danted fixed.
[info] tinyproxy fixed.
[info] sabnzbdplus fixed.
[info] rtorrent fixed.
[info] flood fixed.
[info] nzbhydra2 fixed.
[info] All configs fixed
[info] Run stubby in background on port 53
[15:45:31.659192] STUBBY: Read config from file /root/stubby/stubby.yml
[warn] Your ISP public IP is 71.202.93.211
[info] Set up nftables rules
[info] Editing base ruleset
[info] Flusing ruleset
[info] Added route 192.168.1.0/24 via 172.17.0.1 dev eth0
[info] Apply rules
[info] Quick block test. Expected result is time out. Actual result is ;; connection timed out; no servers could be reached
[info] All rules created
[info] Setting up OpenVPN tunnel
[info] Create tunnel device
[info] Allow DnS-over-TLS for openvpn to lookup VPN server
[info] Connecting to VPN on port 1194 with proto udp...
[info] Connection in progress, wait 10s...
[info] Connection in progress, wait 10s...
[info] Connection in progress, wait 10s...
[info] Connection in progress, wait 10s...
The Connection in progress... message keeps looping. What gives?