happythatsme

Members
  • Posts

    21
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

happythatsme's Achievements

Newbie

Newbie (1/14)

2

Reputation

  1. Hi JorgeB, thank you so much for taking the time to review my logs i really appreicate it. This is 100% a classic case of dumb user error! I can confirm its all working well now, once i gave the sata contoller and the disks back to unraid..... thank you again!
  2. OMG! Have i seriously just been this stupid!🙄 This is next level dumb ! I moved my USB PCI card updated VM must have check the SATA controller too somehow. I shall remove that and hopefully my problems will go away
  3. Hi All, I shut down my server to add a Network Card, when I booted the server back up one of the disks was missing, I suspect I dislodged the SATA cable by mistake. The disk then became disabled in the array, I shut down, reset all the cables and the disk came back up in disabled mode. I restart in maintenance mode to run smart tests - everything seemed fine - I removed it from the array and added it back in. Then rebuilt the array, no errors were reported. However, now i seems to have some XFS errors across all disks: Jul 15 10:06:12 Tower kernel: XFS (md1): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x11a0df168 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md1): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x11a0df168 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md1): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x11a0df168 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md1): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x11a0df168 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md1): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x11a0df168 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md1): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x11a0df168 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md1): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x11a0df168 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md1): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x11a0df168 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md1): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x11a0df168 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md1): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x11a0df168 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md2): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x697e9f18 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md2): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x697e9f18 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md2): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x697e9f18 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md2): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x653bd0d8 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md2): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x653bd0d8 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md2): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x653bd0d8 len 32 error 5 Jul 15 10:06:12 Tower kernel: XFS (md2): metadata I/O error in "xfs_imap_to_bp+0x5c/0xa2 [xfs]" at daddr 0x653bd0d8 len 32 error 5 Jul 15 10:06:13 Tower dhcpcd[3442]: br1: using IPv4LL address 169.254.222.50 All drives appear to have errors now, i've attached the diagnostic files from before and after Jul 14 - While disk was disabled. Jul 15 - After array was rebuilt Any advice on what I should do here? Thanks! tower-diagnostics-20210715-1011.zip tower-diagnostics-20210714-1730.zip
  4. Hi All, I'm using a Unifying receiver passed through to a windows 10 VM. It randomly disconnects in windows, the only way I can get it back again is by rebooting the entire unraid system. The windows VM appears to work fine and Unraid is still running. I can plug in another USB mouse then reboot the system. I realized it only happenes when I was on a conference call, I have a pair of Plantronics Blackwire 5220 USB C headphones. After the unifying reciever disconnects the headphones remain fully funtional. I can finish my call and reboot. But its very frustrating. USB Devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 0d8c:0134 C-Media Electronics, Inc. USB PnP Audio Device Bus 005 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 005 Device 004: ID 0414:a002 Giga-Byte Technology Co., Ltd USB Audio Bus 005 Device 005: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 005 Device 006: ID 047f:c053 Plantronics, Inc. USB2.0 Hub Bus 005 Device 007: ID 048d:8297 Integrated Technology Express, Inc. ITE Device(8595) Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 002: ID 0461:4d17 Primax Electronics, Ltd Optical Mouse Bus 007 Device 003: ID 8087:0029 Intel Corp. Bus 007 Device 004: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 002: ID 0781:55a3 SanDisk Corp. Ultra Luxe Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 002: ID 2109:2812 VIA Labs, Inc. VL812 Hub Bus 009 Device 003: ID 046d:082c Logitech, Inc. HD Webcam C615 Bus 010 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 010 Device 002: ID 2109:0812 VIA Labs, Inc. VL812 Hub I've attached 3 recent crash logs below: tower-diagnostics-20201210-1831.zip 8th Dec: From the syslog i can see the following: Dec 8 19:04:37 Tower kernel: usb 5-4.2: reset full-speed USB device number 5 using xhci_hcd ### [PREVIOUS LINE REPEATED 1 TIMES] ### Dec 8 19:04:38 Tower kernel: logitech-djreceiver 0003:046D:C52B.000F: hiddev97,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:46:00.1-4.2/input2 Dec 8 19:04:38 Tower kernel: input: Logitech MX Master 2S as /devices/pci0000:40/0000:40:01.1/0000:41:00.0/0000:42:08.0/0000:46:00.1/usb5/5-4/5-4.2/5-4.2:1.2/0003:046D:C52B.000F/0003:046D:4069.0010/input/input18 Dec 8 19:04:38 Tower kernel: logitech-hidpp-device 0003:046D:4069.0010: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:46:00.1-4.2:1 Dec 8 19:04:38 Tower kernel: input: Logitech Craft as /devices/pci0000:40/0000:40:01.1/0000:41:00.0/0000:42:08.0/0000:46:00.1/usb5/5-4/5-4.2/5-4.2:1.2/0003:046D:C52B.000F/0003:046D:4066.0011/input/input19 Dec 8 19:04:38 Tower kernel: logitech-hidpp-device 0003:046D:4066.0011: input,hidraw6: USB HID v1.11 Keyboard [Logitech Craft] on usb-0000:46:00.1-4.2:2 Dec 8 19:04:38 Tower kernel: input: Logitech MX Master 3 as /devices/pci0000:40/0000:40:01.1/0000:41:00.0/0000:42:08.0/0000:46:00.1/usb5/5-4/5-4.2/5-4.2:1.2/0003:046D:C52B.000F/0003:046D:4082.0012/input/input20 Dec 8 19:04:38 Tower kernel: logitech-hidpp-device 0003:046D:4082.0012: input,hidraw7: USB HID v1.11 Keyboard [Logitech MX Master 3] on usb-0000:46:00.1-4.2:3 10th Dec: tower-diagnostics-20201210-1831.zip Dec 10 18:04:09 Tower kernel: usb 7-3: USB disconnect, device number 3 Dec 10 18:04:09 Tower kernel: usblp0: removed Dec 10 18:04:13 Tower kernel: usb 7-3: new high-speed USB device number 7 using xhci_hcd Dec 10 18:04:13 Tower kernel: usblp 7-3:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0424 Dec 10 18:27:18 Tower kernel: usb 5-4.2: reset full-speed USB device number 5 using xhci_hcd ### [PREVIOUS LINE REPEATED 1 TIMES] ### Dec 10 18:27:19 Tower kernel: logitech-djreceiver 0003:046D:C52B.000F: hiddev97,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:46:00.1-4.2/input2 Dec 10 18:27:19 Tower kernel: input: Logitech MX Master 3 as /devices/pci0000:40/0000:40:01.1/0000:41:00.0/0000:42:08.0/0000:46:00.1/usb5/5-4/5-4.2/5-4.2:1.2/0003:046D:C52B.000F/0003:046D:4082.0010/input/input30 Dec 10 18:27:19 Tower kernel: logitech-hidpp-device 0003:046D:4082.0010: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Master 3] on usb-0000:46:00.1-4.2:3 Dec 10 18:27:19 Tower kernel: input: Logitech MX Master 2S as /devices/pci0000:40/0000:40:01.1/0000:41:00.0/0000:42:08.0/0000:46:00.1/usb5/5-4/5-4.2/5-4.2:1.2/0003:046D:C52B.000F/0003:046D:4069.0011/input/input31 Dec 10 18:27:19 Tower kernel: logitech-hidpp-device 0003:046D:4069.0011: input,hidraw6: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:46:00.1-4.2:1 Dec 10 18:27:19 Tower kernel: input: Logitech Craft as /devices/pci0000:40/0000:40:01.1/0000:41:00.0/0000:42:08.0/0000:46:00.1/usb5/5-4/5-4.2/5-4.2:1.2/0003:046D:C52B.000F/0003:046D:4066.0012/input/input32 Dec 10 18:27:19 Tower kernel: logitech-hidpp-device 0003:046D:4066.0012: input,hidraw7: USB HID v1.11 Keyboard [Logitech Craft] on usb-0000:46:00.1-4.2:2 Dec 10 18:27:21 Tower kernel: logitech-hidpp-device 0003:046D:4082.0010: HID++ 4.5 device connected. Dec 10 18:27:23 Tower kernel: logitech-hidpp-device 0003:046D:4066.0012: HID++ 4.5 device connected. This morning the entire VM crashed when i picked up a call, it seems the GPU has some issues too. tower-diagnostics-20201211-1032.zip Dec 11 10:24:52 Tower kernel: usb 7-3: USB disconnect, device number 3 Dec 11 10:24:52 Tower kernel: usblp0: removed Dec 11 10:31:31 Tower kernel: usb 5-4.2: reset full-speed USB device number 5 using xhci_hcd Dec 11 10:31:31 Tower kernel: usb 7-5: reset full-speed USB device number 4 using xhci_hcd Dec 11 10:31:32 Tower kernel: usb 5-1: reset full-speed USB device number 2 using xhci_hcd Dec 11 10:31:32 Tower kernel: vfio_bar_restore: 0000:05:00.1 reset recovery - restoring bars Dec 11 10:31:32 Tower kernel: vfio_bar_restore: 0000:05:00.0 reset recovery - restoring bars Im not sure whats causing this, could the USB hub get overloaded, maybe my headphones are drawing too much power im really not sure. Any help would be very much appreciated. Thanks!
  5. Did ever find a solution? my RX5700 has no randomly stopped working with my windows VM. It will just stop working while using it... Driving me mad.
  6. Hi grizzle, Do you have a single GPU in your system ? I had some issues getting Uraid to release the card to my VMs i bought a very cheap card to get around this. Also the AMD reset bug caused me major issues, once i rebooted the VM, i had to restart the entire system to release the resource and allow it to boot again. Do your logs show any error when you start the VM?
  7. Hi Grizzle, Did you get your RX5700 working ? I managed to get it working for me, however, i had to pass the rom file and enable multifunction, I didnt have to do this in windows. I also passedthrough an NVME drive for video editing. <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x05' slot='0x00' function='0x0'/> </source> <alias name='hostdev0'/> <rom file='/mnt/user/isos/Powercolor.RX5700XT.8176.190808.rom'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0' multifunction='on'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x05' slot='0x00' function='0x1'/> </source> <alias name='hostdev1'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x1'/> </hostdev> Full XML: <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='1' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <name>MacinaboxCatalina</name> <uuid>ae14c64c-03cc-4b73-a006-85958f10c075</uuid> <description>MacOS Catalina</description> <metadata> <vmtemplate xmlns="unraid" name="MacOS" icon="/mnt/user/domains/MacinaboxCatalina/icon/catalina.png" os="Catalina"/> </metadata> <memory unit='KiB'>8388608</memory> <currentMemory unit='KiB'>8388608</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>40</vcpu> <cputune> <vcpupin vcpu='0' cpuset='12'/> <vcpupin vcpu='1' cpuset='44'/> <vcpupin vcpu='2' cpuset='13'/> <vcpupin vcpu='3' cpuset='45'/> <vcpupin vcpu='4' cpuset='14'/> <vcpupin vcpu='5' cpuset='46'/> <vcpupin vcpu='6' cpuset='15'/> <vcpupin vcpu='7' cpuset='47'/> <vcpupin vcpu='8' cpuset='16'/> <vcpupin vcpu='9' cpuset='48'/> <vcpupin vcpu='10' cpuset='17'/> <vcpupin vcpu='11' cpuset='49'/> <vcpupin vcpu='12' cpuset='18'/> <vcpupin vcpu='13' cpuset='50'/> <vcpupin vcpu='14' cpuset='19'/> <vcpupin vcpu='15' cpuset='51'/> <vcpupin vcpu='16' cpuset='20'/> <vcpupin vcpu='17' cpuset='52'/> <vcpupin vcpu='18' cpuset='21'/> <vcpupin vcpu='19' cpuset='53'/> <vcpupin vcpu='20' cpuset='22'/> <vcpupin vcpu='21' cpuset='54'/> <vcpupin vcpu='22' cpuset='23'/> <vcpupin vcpu='23' cpuset='55'/> <vcpupin vcpu='24' cpuset='24'/> <vcpupin vcpu='25' cpuset='56'/> <vcpupin vcpu='26' cpuset='25'/> <vcpupin vcpu='27' cpuset='57'/> <vcpupin vcpu='28' cpuset='26'/> <vcpupin vcpu='29' cpuset='58'/> <vcpupin vcpu='30' cpuset='27'/> <vcpupin vcpu='31' cpuset='59'/> <vcpupin vcpu='32' cpuset='28'/> <vcpupin vcpu='33' cpuset='60'/> <vcpupin vcpu='34' cpuset='29'/> <vcpupin vcpu='35' cpuset='61'/> <vcpupin vcpu='36' cpuset='30'/> <vcpupin vcpu='37' cpuset='62'/> <vcpupin vcpu='38' cpuset='31'/> <vcpupin vcpu='39' cpuset='63'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-3.1'>hvm</type> <loader readonly='yes' type='pflash'>/mnt/user/domains/MacinaboxCatalina/ovmf/OVMF_CODE.fd</loader> <nvram>/mnt/user/domains/MacinaboxCatalina/ovmf/OVMF_VARS.fd</nvram> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-passthrough' check='none'> <cache mode='passthrough'/> <feature policy='require' name='topoext'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='writeback'/> <source file='/mnt/user/domains/MacinaboxCatalina/Clover.qcow2' index='3'/> <backingStore/> <target dev='hdc' bus='sata'/> <boot order='1'/> <alias name='sata0-0-2'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/MacinaboxCatalina/Catalina-install.img' index='2'/> <backingStore/> <target dev='hdd' bus='sata'/> <alias name='sata0-0-3'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/MacinaboxCatalina/macos_disk.img' index='1'/> <backingStore/> <target dev='hde' bus='sata'/> <alias name='sata0-0-4'/> <address type='drive' controller='0' bus='0' target='0' unit='4'/> </disk> <controller type='sata' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'> <alias name='pcie.0'/> </controller> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x10'/> <alias name='pci.1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x11'/> <alias name='pci.2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0x12'/> <alias name='pci.3'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0x13'/> <alias name='pci.4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/> </controller> <controller type='pci' index='5' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='5' port='0x8'/> <alias name='pci.5'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/user/Media/Wedding/'/> <target dir='Wedding'/> <alias name='fs0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </filesystem> <interface type='bridge'> <mac address='52:54:00:74:a0:97'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='e1000-82545em'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/0'/> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/0'> <source path='/dev/pts/0'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-1-MacinaboxCatalina/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='connected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <alias name='input0'/> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'> <alias name='input1'/> </input> <input type='keyboard' bus='ps2'> <alias name='input2'/> </input> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x05' slot='0x00' function='0x0'/> </source> <alias name='hostdev0'/> <rom file='/mnt/user/isos/Powercolor.RX5700XT.8176.190808.rom'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0' multifunction='on'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x05' slot='0x00' function='0x1'/> </source> <alias name='hostdev1'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x1'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x046d'/> <product id='0xc52b'/> <address bus='5' device='2'/> </source> <alias name='hostdev2'/> <address type='usb' bus='0' port='4'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x047f'/> <product id='0xc053'/> <address bus='5' device='6'/> </source> <alias name='hostdev3'/> <address type='usb' bus='0' port='5'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </source> <alias name='hostdev4'/> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </hostdev> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> <qemu:commandline> <qemu:arg value='-usb'/> <qemu:arg value='-device'/> <qemu:arg value='usb-kbd,bus=usb-bus.0'/> <qemu:arg value='-device'/> <qemu:arg value='************************'/> <qemu:arg value='-smbios'/> <qemu:arg value='type=2'/> <qemu:arg value='-cpu'/> <qemu:arg value='Penryn,kvm=on,vendor=GenuineIntel,+invtsc,vmware-cpuid-freq=on,+pcid,+ssse3,+sse4.2,+popcnt,+avx,+aes,+xsave,+xsaveopt,check'/> </qemu:commandline> </domain> I still suffer from the AMD reset bug, i need to restart if i want to switch from MAC to Windows, not ideal, but its working... Spaceinvader mentions it in this video, the script stopped working for me also.
  8. Hi All, I have a set of Platronis Blackwire 5220 usb-c headphones. They work 100% in my windows 10 VM with no issues, however, when i use them in Macinabox Catalina the audio breaks up and sounds horrible, they are unusable. Has anyone else had any issues with USB headsets in mac ? Thanks tower-diagnostics-20200620-1904.zip
  9. Hi Everyone, Thanks for your help so far, I wanted to document what I’ve learned over the weekend just in case anyone else comes across this thread and also so i can remember what i did.. I tried the following: Removed all drives and 3rd Party NIC - fans continue to ramp up Changed many settings in bios Cooling Performance etc... Reset to defaults I copied the settings exactly from the 12Core to the 20Core I created a fresh install of Unraid just in case my version had messed up. Made no difference. Stopped Docker and VM manager. Made no difference. Stopped Array. Made no difference 20Core has 750w PDU - 12Core has 460Watt Removed the spare PDU from 12 Core and tried in 20Core. Made no difference. Plugged in both 460watts with Power to 20Core. Made no difference. Updated ILo - Trial License – Free until the end of 2020 Free iLO Advanced 2020 I have not attempted to update any other firmware yet. Note 20Core and 12Core seem to have the same setup. Viewing the fans staus via iLo became tiresome, I also had no way to view historical performace. I decided to pull stats from the server (CPU, fan speed, temps, etc...) then plot them on a time series DB, that way I could compare temps v fan or CPU usage v fan. I came across this post: https://www.homelabrat.com/ipmi-dashboard/ Enable IPMI over LAN Access Loggin to iLO: Administration Access Settings Enable IPMI/DCMI over LAN Access I installed Community Applications Then installed the following Docker containers: influxdb granfana telegraf Influxdb: default - no changes Telegraf: Ensure you create a file at the following location: /mnt/user/appdata/telegraf/telegraf.conf - Note the docker install created a folder telegraf.conf - i deleted it and replaced it with the contents of this file: https://github.com/influxdata/telegraf/blob/master/etc/telegraf.conf Open the console to the telegraf docker install ipmitool by running the following commands: apk update apk add ipmitool Now you can use ipmitool to pull stats from iLO, verify the following command works, replacing your IP/USER/PASS Note -I can be either lan or lanplus - lanplus worked for me ipmitool -H 192.168.1.142 -U admin -P password -I lanplus sdr You should see something like so: ipmitool -H 192.168.1.142 -U admin -P password -I lanplus sdr UID Light | 0x00 | ok Sys. Health LED | no reading | ns 01-Inlet Ambient | 32 degrees C | ok 02-CPU 1 | 40 degrees C | ok 03-CPU 2 | 40 degrees C | ok 04-P1 DIMM 1-6 | disabled | ns 05-P1 DIMM 7-12 | 39 degrees C | ok 06-P2 DIMM 1-6 | disabled | ns 07-P2 DIMM 7-12 | 37 degrees C | ok 08-P1 Mem Zone | 39 degrees C | ok Now edit the following file: /mnt/user/appdata/telegraf/telegraf.conf Search in the file for IPMI, then remove # at the following lines, or paste the text below (replacing you IP/USER/PASS ) Im pulling stats from iLo every 10seconds [[inputs.ipmi_sensor]] servers = ["admin:password@lanplus(192.168.1.142)","admin:password@lanplus(192.168.1.110)"] interval = "10s" timeout = "20s" path = "/usr/sbin/ipmitool" metric_version = 2 Save and close the file then restart telegraf Check the logs to ensure there are no errors by clicking the log icon on the right of the telgraf docker container: telegraf should be pulling information from both my servers and sending it to the telgraf db in influxdb every 10 seconds Grafana Now we need to visualize the data, note i am not an expert in grafana, i followed a few tutorials online. login to your docker by connecting to port http://UNRAIDIP:3000 default username/password is admin/admin We need to connect grafana to influxdb, on the left select the settings icon and select data sources Change the following: name: influxdb URL: http://UNRAIDIP:8086 Database: telegraf Hit save and test, if everything worked you should see the following: We could create a dashboard from scratch, but that will take too long, so lets import one. Click the plus icon and select import: Pre-made dashboards here, i tried both, neither worked straight away. https://grafana.com/grafana/dashboards/10192 (DL380 Gen8 ) https://grafana.com/grafana/dashboards/10191 (DL360 Gen7) Paste the id and hit the tab key, either 10191 or 10192 You should then see the following: Name: whatever you want Folder: general will make it easier to find in the future uid: hit change if you see an error you should now see a screen like so, note the server address is wrong Click the settings icon on the top right and select varibles Double click on the server varible, change the values to match your server and hit the update button then go back to the dashboard. You can now select your ip from the top left, select it and hit save You should then see something like so: Note the fans didn't work by default for me but mess around until you get it working as you like. HP Serv-1588565699801.json you can also import this my dashboard from this json file I can now see the temperature over time and the fan speed: Notice the three red circles where the fans dopped down to 30ish % I realized I had reset the ilo at those points, it had also reset the fans... By running the following command, i could reset the ilo and thus reset the fans. ipmitool -H 192.168.1.110 -U admin -P password -I lanplus mc reset warm As the fans were still ramping up to 95% after 17mins or so - I then decided to reset the ilo every 5mins... I installed the plugin CA User Scripts, then created a new script called resetIlo Script: #!/bin/bash ipmitool -H 192.168.1.110 -U admin -P password -I lanplus mc reset warm Set the a custom schedule to run every 5mins */5 * * * * The average over a 5mins period is now 45% much better than 95% While I clearly have not found the cause of the issue, I've least found a "workaround" for now... 45% average is much better than 95%. Last 6 hours: Thanks
  10. Thanks, i checked they are all HP
  11. Servers are both HPDL360 Gen 8 I copied the temps into a table to compare, not much difference, mostly the same on each sever, if anything the 20Cores seems to be cooler than the 12Core.
  12. Hi All, Wondering if anyone can help or at least point me in the right direction, i understand this is not an HP support forum, but i know mamy of your have experience. I bought 2x used HPDL360 ( no warrenty of support from HP) 2x 10Core Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz 2x 6Core Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz Both of them are running fine, however, the 2x10Core fans are running at 94% most of the time, even with the VM and dockers stopped. The 2x 6 Core is fine running at 26% 2x10Core: 2x 6Core I cant really see any major difference between them. I have installed a Solarflare card in each of them. dl360-20core-diagnostics-20200430-1356.zip ( Licensed ) tower-diagnostics-20200430-1357.zip ( trial ) Anything else i should be looking for? Thanks
  13. Passed through successfully using version 6.8.0 - thanks again!
  14. I created a new VM - As i thought the XML from 6.8.3 may not be compatible with 6.8.0 I passed the card to the new VM and it booting right now... I will report back