BigMal

This is complete user error on my part. For those who may have similar issues, do the following: As instructions clearly state, select the folder with the "ab_" folders in them. Not the actual "ab_" folder as I was doing (that is what caused the initial error. I selected those folders because when I selected the backup folder and clicked "Next", I did not pay close enough attention to the fact that "Step 2" appeared below. Then, I just followed the instructions. Again, completely my fault. But, aopreciate the responsiveness and willingness to assist.

The one I am attemping to restore does not have "-failed" at the end.

Yes I am. Just re-ran a manual backup and get the same issues.

When attempting to restore appdata, I get an error: Invalide Sourec - The selected source seems invalid. I'm likely missing something obvious, but I cannot figure out what. Below is my log file number. Thank you for your help 2605837a-0e1d-4638-a6d5-7101d2336d12

Came back to update. Not related to Unraid at all. Just got a Mac and connected via a docking station (which is hardwired to network) and it's related to that. For whatever reason, it's causing issues when I disconnect it - it causes all hardwired connections to lose connectivity to the network. Plug it back in and everything is fine again. So, I need to work on that if I wish to operate via wired.

Thanks! Agree, I don’t think it’s the server either. I believe I’ve got another NIC a I can use to at least test. Appreciate the help.

Tried another cable already and that didn’t help. Another devices are getting IPs from the router without issue.

With explaination, my server stopped connecting to the network. All other devices o the network are connected fine, it's just unRaid. It does not appear to be getting an address from my router, which I already reset. Connecting via a monitor and keyboard with the GUI, I tried deleting the network-rules and network cfg files. For whatever reason, it will not get an address and setting a static IP address does not work either. I've attached my diagnotics file. Any support or pointers would be greatly appreciated. tower-diagnostics-20230523-2100.zip

Got this up and running and works great! Appreciate all the work that went into the development. My RTL-SDR Device seems to keep moving Port/Device. For example, it will be on Port 001 Device 025 and the move to Port 001 Device 023. When it does that, the docker will crash and stop. Is there anyway to fix this?

You helped me narrow it down to CF as the issue. Thanks.

It's got to be something related to CF as it works if I use port forwarding and a duckdns domain.

Yes, both 443 and 80 are open. I'm using Cloudflare to point to my public IP. I can access all other sites using NPM using the custom cert. I just cannot create a Let's Encrypt cert. I'm confident it's one setting I've got off...just don't know which one that "one" is.

At the risk of sounding completely ignorant, I'm having trouble establishing a Let's Encrypt certificate. I can create custom ones easily enough, but would like to have auto-renewing certs to simplify the process. When entering my domain into the "Add Let's Encrypt Certificate" box, select "I agree to the...", and click Save, the following error shows up. Any pointers on what I may be doing wrong. I'm using Cloudflare to manage all DNS.

Hoping someone can help. I am able to access my server remotely via Wireguard. However, I cannot access any other asset on the network (i.e., Home Assistant on a VM/another IP). Additionally, I cannot access the internet. Below is my configuration on VM Manager. Any insight would be greatly appreciated.

Thank you for this excellent docker. I've got it up and running locally, but when trying to run through NPM, having a bit of an issue. I can access the login screen, but once I enter the login information, nothing happens. If I refresh, it goes to the dashboard. Then, if click on anything else, nothing happens again until I refresh the browser. Any pointers? Thank you. Edited to add graphic: This also happens once I do refresh -

This is so clean and easy, I'm almost scared that it's not working. Any way to ensure that it is? Also, I've got everything up and running using cloudfare (not the docker, the website) to manage DNS. The only issue is that I cannot enter duckdns into the A record for my root or www entries. I have to enter my public IPS IP. This changes with every router reboot. So, that means I will need to update cloudfare whenever my router updates the IP address, which seems to be frequently. Any suggestions?

I'm having issues whenever I try to reboot my unRaid server in that on shutdown, the array gets hung on "Retry unmounting user share(s)...". Below are my current mount, unmount, and upload scripts. Do you see any issues. Anything else I can check to see why it's hanging? rclone_mount (runs at startup) rclone_unmount (runs at startup) rclone_upload (runs every 10 minutes) Appreciate any help!

Well, I figured it out. My issue was that I was failing to setup the additional port on privoxyvpn to allow nzbget's port 6789 to route through it

Thanks for the reply. I'm on 6.8.3 and just did a "New Config". Before doing so, it worked fine by going to the advanced settings, setting network type to "None" and using the extra parameter of --net=container:binhex-privoxyvpn. Could I have messed something up when doing the New Config. I thought that essentially erased everything.

I'm trying to run this docker through binhex-privoxyvpn. It will work fine when run directly, however, when I set Network Type to "None" and enter --net=container:binhex-privoxyvpn, it will not connect. Connects fine when run direct. Any thoughts on a step I might be missing? I seem to be connecting binhex-privoxyvpn just fine as I am getting a VPN IP address, but nzbget just will not connect through it. Appreciate any help.

Thank you. Tried it and still get connection refused. I must have something else wrong.

Totally new to this, so making sure I'm having the same issues as everyone else. I cannot even access the webUI. When I try, I get xx.xx.xx.xx refused to connect.

Thanks so much for the quick response. I'll give it a try.

Noob question for everyone. I've searched but cannot seem to find the answer, maybe because I'm using the wrong terminology. But, is it possible to move all the files from one G Drive account to another? I'm assuming I'd have to establish a new mount in addition to the existing one, but just not sure how to update the user script to do this.

Trying to get rclone setup and following this video. I can see the existing subfolders in rclone when running rclone lsd google: from the command prompt within unRaid. However, when I try to copy a file from unRaid over to the mounted folder under /mnt/disks/google/, none of the existing GDrive subfolders show up and I get a message "There is not enough space on the disk to write file:///XXXXXXX". Any insight in what I might be doing wrong?