Liwanu

Yes sir, i saw that corruption. Running a scrub right now to verify all the other data is good and will restore those files from backup. Thanks for your assistance!

Yes they are encrypted, that did indeed get them back online! For the zpool, i ran zpool import zfs_array. It looks like it mounted it correctly. The Main GUI page still shows the zfs_array as unmountable. However, when looking at the rootshare it appears all the files are there. When looking at the server over SMB, there are quite a few shares missing. Is there a command to reload/refresh the shares? Edit: I ran /etc/rc.d/rc.samba restart and the shares are now present. New diags attached and thank you!

I updated to 6.12.0-rc2, created a zpool called "zfs_array". Then i configured most of the shares to cache prefer: zfs_array and ran the mover. Mover ran without any issues and moved about ~9.5TB of data. Sometime after that the UI because unresponsive, I restarted the server and now all the disks except for one are getting "Unmountable: Unsupported or no file system". I ran xfs_repair -v on one of the main Array disks that had all the data moved off to the zfs_array. It went through and said came back with "could not find valid secondary superblock". I was able to get all the disks in the main array to show up once, but all of the BTRFS cache pools and the zfs_array still showed unmountable. I restarted again and we are back to all the disks showing unmountable. Something else is also weird, when restarting, sometimes i'll lose all network connectivity. Restarting again will bring it back.

Thanks i believe that was the issue. I reverted the update, then removed some ZFS plugins that were installed. Updated again and the issue went away. Only one issue left that i can tell. The top of the Web GUI looks a little strange, there are side to side scroll arrows. I tried opening in incognito to make sure it wasn't a cache issue and it's still there.

Updated to 6.12.0 RC1, rebooted, All came up good. Restarted again, no Web GUI. - I couldn't even Ping the IP. Rebooted into console mode with Web GUI, Web GUI doesn't work there either. - Ping starts working. Ran these commands: /etc/rc.d/rc.nginx restart - Errored out and said the service isn't started. /etc/rc.d/rc.nginx start - The service started /etc/rc.d/rc.nginx reload - reloaded successfully. Now i'm getting 502 bad gateway. Any suggestions? tower-diagnostics-20230316-0647.zip

Every 30-45 Days my Unraid box becomes unresponsive. When this happens, i notice a few things. *The single Ubuntu VM i have has the console message "hung_task_timeout_secs database:898 blocked for more than 120 seconds" *Dockers become unresponsive (Unable to stop them) *Sometimes i have to force a power off as the system will not perform a clean restart on it's own *Menus in the Unraid GUI stop working The past 3 times this has happened i was unable to collect diagnostics. Thankfully this time i was able to download the bundle. I run monthly parity checks and have never had an error. One thing i just noticed is that the mover is still running, it's scheduled to kick off at 2AM, it's odd for it to still be running 7 hours later. Unraid 6.8.3 Hardware Info: SuperMicro SuperStorage 6047R-E1R24N Chassis SuperMicro X9DRi-LN4+ Motherboard 2x Xeon E5-2650v2 CPU 128GB DDR3 ECC RAM 1x Mellanox 10Gb NIC 1x LSI SAS 9201-16I HBA Array: Parity - 2x Seagate ST8000VN004 Data- 1x Seagate ST8000VN004 , 2x Seagate ST8000DM004 , 1x WD80EMAZ , 4X WD40EFRX Cache: 2x WD Red WDS200T1R0A (BTFRS Mirror) Plugins: CA Backup/Restore Appdata Unassigned Devices CA Auto Turbo Write Mode CA Auto Update Applications Community Applications Disable Mitigation Settings (Intel mitigation disabled) Dynamix Cache Directories Dynamix SSD TRIM Fix Common Problems Nerd Tools Preclear Disks Speedtest Command Line Tool Tips and Tweaks Unassigned Devices Plus unBALANCE User Scripts Dockers (Only listed the ones i have on 24/7) CrashPlanPRO emby lancache-bundle unifi-controller cablefs-diagnostics-20200710-0842.zip

Does anyone know how to assign additional IPs to this docker? According to the Lancache.net Tuning Guide, you can add multiple IP addresses to the docker to increase download speeds, then you need to Inform lancache-dns of the extra IP’s.