-
Posts
97 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Report Comments posted by DarkMan83
-
-
New report here:
Currently I'm on Unraid 6.9.3 and just added another drive.
Including cache I'm having 12 drives.
The problem is back for me, regardless if on mobile device or desktop pc and it's also regardless which browser i use (tested Edge which is chromium based, Chrome and firefox) and the problem is back.
Had to write the config file by hand.
-
Wonderful, fingers crossed, that it will fix the problems 😀
-
22 hours ago, jsiemon said:
Just a quick follow-up to my previous post. Its been about a week now since I changed my 2 Docker containers from br0 + static ip to Host and so far no crashes. All of my other Docker containers were already on Host or Bridge. I realize that a week isn't a long time, but prior to this change I had 3 KP in the span of a week so this change appears to have made a significant improvement and may point to the root cause of the issue. I'll report back again in another week good or bad.
UPDATE:
url_redirect.cgi.bmp 606.65 kB · 12 downloads
I spoke too soon. Just had a KP. Here is a screen shot. I know it's not the same as a log, but it is all that I have.
Same kernel panic as always
-
This should explain, why the panics doesn't occur after a crash/restart of the server, because setting the "Host Access" to yes does not persist a reboot for me. After reboot it shows still yes, but the host can't access the container.
So i have to disable and than enable host access in the settings again.
After that it works again but the kernel panic will occur at some time.
Mybe i'm alone with this setting persitant bug, but if more ppl on the same boat and it' unknown untill now, than there could possibly much more ppl with kernel panics upcoming
Could be easily verified, just ping the container from host after reboot.
P.S. Sometimes i'm running for weeks until a panic occurs.
-
15 hours ago, Linux said:
Alright on my main machine I tried IE, edge, Chrome, and firefox all the same results. It just gets reset after setting a second device. I switched to my Pixel 4XL chrome and was able to properly update all my drives.
okay, for me it only worked on my workstation. It's interesting, that it worked for you on pixel.
-
Okay, verified...
On my desktop pc with e.g. chrome all the settings working and nothing is overwritten. (verified 3 times)
On my Tablet (Galaxy Tab S6 OS: Android) with Chrome the problem occurs.
Holy shit, who could ever imagine thats the Client-Browser / OS combo...
-
i've tried in safe mode, but still the same behaviour.
this behaviour is randomized, sometimes it happens on third drive, sometimes i can configure 4-5 drives until it happens...
New screen recording in safe mode: https://gofile.io/d/rhfptu
As this is a Android Tablet with Chrome, i will retry on pc.
- 1
-
I've made a screen recording.... https://gofile.io/d/dIo5Fi
-
What's up @limetech are you guys still alive?
Any heartbeat? 😁
-
I was not able to get disgnostics, as the server gets unresponsive, because it doesn't finish and stays forever on collecting.(both, webgui + console)
I could only get the Systemprotocol with repeating Kernel Stacktrace...
Protocol < NoPaste
Any ideas?
Greetings
Dark
-
For me it's still relevant, as i don't have a VLAN active and it worked all fine brfore RC1...
-
The next time it happens I'll plug in a keyboard and monitor right away and try to get a diagnosis...
Hopefully the console would be responsive.
-
I thought it was solved, but it's back again in RC2.
-
Changed Status to Open
-
1 hour ago, craigr said:
Need to report
Need to report same issue. Spin all drives down and spin back up resolves.
-
-
13 minutes ago, limetech said:
Need diags
Added diags Tom 🙂
I also got a Stacktrace in logs now, dunno if anything is related.
https://nopaste.xyz/?5990e0c2fafd1ce7#6fi3fQWdQE5buGqCyfaHGsBnQzGMndknZrtqbemc7AAn
Don't get confused if any smartdata is in logs, the values are ok, i had a bad usb dock one time, but now all hdds used internally.
-
3 hours ago, SimonF said:
@DarkMan83Smart info only shows in GUI if disks are spinning now. Are your disks spun up?
Thanks for your reply, but please ppl stop asking those questions.
There's No reason using smart data with spun down disks and as you can see, console smartctl is showing smart data.
So guess what? Disks not spun down...
@SimonF Made my day 😂👍
-
-
This is solved for me in RC2...
-
14 hours ago, Marshalleq said:
I've just seen some strange behaviour in this space due to a ghost Nic in my network.cfg. If you've had multiple nics it might be worth checking that.
Only one nic configured...
-
@limetech Hey Tom, the Dashboard finallay shows the temps of the drives, if i once spin down the hdd's...
But now it seems i get no more SmartData shown in Disk -> Settings...
Reading Smartdata in console is still fine...
Dunno if this is related to the temp display fix for dashboard.
Can anyone confirm, that Smartdata is no more displayed on other controller type than default?
-
1 hour ago, limetech said:
If you click on the disk from Main, what are you selecting in "SMART Settings/SMART controller type"?
With my controller i can use "cciss" or "sat" ( where smartctl suggests "cciss" as you can see in the screen)...regardless which one i choose no temps in main. Smart data is working for me we with either of them.
In another topic i can't remember it was already confirmed, that selecting a specific controller type (regardless which one) is ignored for the command that reads the temps, seems that the controller type value isn't properly used to build the command with the needed params...
-
There's also an similar old bug report for this i think...
[6.10.0-RC2 & RC3] GPU Passthrough not working and causes eventual WebUI crash
-
-
-
-
-
in Prereleases
Posted
You should always bind your GPU, to circumvent any problems related to binding!