aether

DONE!

Last night I upgraded unraid from 6.9.2 to 6.11.1 in the WebUI. After the upgrade was completed, I rebooted the system. Then I have not been able to connect to the WebUI. I tried to log in to unraid via command line, and it turns out that all the disks cannot be mounted. This annoys me a lot. Has anyone else had the same experience? I would like to know what the possible causes are. There is some relevant information below. root@Tower:/mnt# ls -al total 0 drwxr-xr-x 4 root root 80 Oct 29 10:30 ./ drwxr-xr-x 19 root root 400 Oct 29 10:30 ../ drwxr-xr-x 6 nobody users 140 Oct 29 10:30 RecycleBin/ drwxrwxrwt 2 nobody users 40 Oct 29 10:30 disks/ root@Tower:/mnt# df -lh Filesystem Size Used Avail Use% Mounted on rootfs 16G 873M 15G 6% / tmpfs 32M 340K 32M 2% /run /dev/sda1 15G 684M 14G 5% /boot overlay 16G 873M 15G 6% /lib/firmware overlay 16G 873M 15G 6% /lib/modules devtmpfs 8.0M 0 8.0M 0% /dev tmpfs 16G 0 16G 0% /dev/shm cgroup_root 8.0M 0 8.0M 0% /sys/fs/cgroup tmpfs 128M 276K 128M 1% /var/log tmpfs 1.0M 0 1.0M 0% /mnt/disks tmpfs 3.2G 0 3.2G 0% /run/user/0 root@Tower:/mnt# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS loop0 7:0 0 116.8M 1 loop /lib/firmware loop1 7:1 0 19.5M 1 loop /lib/modules sda 8:0 1 14.3G 0 disk └─sda1 8:1 1 14.3G 0 part /boot sdb 8:16 0 3.6T 0 disk └─sdb1 8:17 0 3.6T 0 part sdc 8:32 0 3.6T 0 disk └─sdc1 8:33 0 3.6T 0 part sdd 8:48 1 3.6T 0 disk └─sdd1 8:49 1 3.6T 0 part sde 8:64 1 3.6T 0 disk └─sde1 8:65 1 3.6T 0 part sdf 8:80 0 931.5G 0 disk └─sdf1 8:81 0 931.5G 0 part sdg 8:96 0 3.6T 0 disk └─sdg1 8:97 0 3.6T 0 part nvme1n1 259:0 0 238.5G 0 disk └─nvme1n1p1 259:1 0 238.5G 0 part nvme0n1 259:2 0 238.5G 0 disk └─nvme0n1p1 259:3 0 238.5G 0 part root@Tower:/mnt# cat /etc/fstab /dev/sda1 /boot vfat rw,flush,noatime,nodiratime,dmask=77,fmask=177,shortname=mixed /boot/bzmodules /lib/modules squashfs ro,defaults /boot/bzfirmware /lib/firmware squashfs ro,defaults tmpfs /dev/shm tmpfs defaults hugetlbfs /hugetlbfs hugetlbfs defaults