Schmeckles23

Members
  • Posts

    11
  • Joined

  • Last visited

Posts posted by Schmeckles23

  1. 11 hours ago, dlandon said:

    Be sure you use the new template from CA and set the shared memory as per the instructions in the template.

    Thank you, I will check later. Was there some additional settings added on the update which could have caused this?

    As it's worked flawlessly for months even after updating.

  2. Hello,

     

    Has anyone managed to get temperature sensors working with Ryzen 7's? I have read that a kernel upgrade can solve this but if I am honest I don't want to mess with anything outside of the UnraidOS build to avoid bugs and issues.

     


    root@Tower:~# sensors
    No sensors found!
    Make sure you loaded all the kernel drivers you need.
    Try sensors-detect to find out which these are.
    root@Tower:~# sensors-detect
    -bash: /usr/sbin/sensors-detect: /usr/bin/perl: bad interpreter: No such file or directory
     

  3. Hello,

     

    I am doing GPU Passthrough on my Nvidia card, if I pass the audio through I get audio but no video, if I pass the video without audio I get video.

    I checked the logs and seen this error Cannot reset device 0000:29:00.1, depends on group 22

     

    Any ideas?

     

    IOMMU group 21:[10de:1f02] 29:00.0 VGA compatible controller: NVIDIA Corporation TU106 [GeForce RTX 2070] (rev a1)

    IOMMU group 22:[10de:10f9] 29:00.1 Audio device: NVIDIA Corporation TU106 High Definition Audio Controller (rev a1)

    IOMMU group 23:[10de:1ada] 29:00.2 USB controller: NVIDIA Corporation TU106 USB 3.1 Host Controller (rev a1)

    IOMMU group 24:[10de:1adb] 29:00.3 Serial bus controller [0c80]: NVIDIA Corporation TU106 USB Type-C UCSI Controller (rev a1)

  4. On 7/19/2020 at 9:13 PM, flamegrilled said:

    @Schmeckles23 How did you fix it? Logs ?My Docker Image is doing the same thing.

    Sorry for the delay. I simply lowered the level of logs and only important ones are now logged.

     

      

    On 9/10/2020 at 12:59 PM, Squid said:

    I wasn't aware of this command, that's neat - Thanks! :D

    • Thanks 1
  5. Hello,

     

    I thought I would move my transcoding to my RX 550 which has been sat idle for almost 6 months, In the past I had no issues with GPU passthrough but right now my Windows 10 doesn't boot and locks all cores to 100%, no display on my TV either.

     

    I just rebooted with Hyper-V set to 'YES' and managed to RDP in for around 10 seconds and then it froze as soon as I turned the TV on and now it's back to 100% CPU cores and no response, any ideas?

     

    Config:

    CPU Mode - Host Passthrough

    Initial RAM: 8GB

    Max Memory: 8GB

    Machine: i440fx-4.2

    BIOS: OVMF

    Hyper-V: Yes

    Graphics Card: AMD Radeon 540/540x/550/550X / RX 540x/550

    Sound Card: AMD Baffin HDMI/DP Audio

    Network Bridge: br0

    PCIe ACS override: Both

     

    IOMMU group 30:[1002:699f] 29:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Lexa PRO [Radeon 540/540X/550/550X / RX 540X/550/550X] (rev c7)

    IOMMU group 31:[1002:aae0] 29:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X]

     

    Log:

    smp 12,sockets=1,cores=6,threads=2 \
    -uuid a3e8e286-8108-56ba-699b-541781cd7f1c \
    -display none \
    -no-user-config \
    -nodefaults \
    -chardev socket,id=charmonitor,fd=35,server,nowait \
    -mon chardev=charmonitor,id=monitor,mode=control \
    -rtc base=localtime,driftfix=slew \
    -global kvm-pit.lost_tick_policy=delay \
    -no-hpet \
    -no-shutdown \
    -boot strict=on \
    -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x7.0x7 \
    -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x7 \
    -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x7.0x1 \
    -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x7.0x2 \
    -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x3 \
    -blockdev '{"driver":"file","filename":"/mnt/disk1/domains/Win10/Windows 10/vdisk1.img","node-name":"libvirt-3-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
    -blockdev '{"node-name":"libvirt-3-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-3-storage"}' \
    -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=libvirt-3-format,id=virtio-disk2,bootindex=1,write-cache=on \
    -blockdev '{"driver":"file","filename":"/mnt/user/isos/Windows.iso","node-name":"libvirt-2-storage","auto-read-only":true,"discard":"unmap"}' \
    -blockdev '{"node-name":"libvirt-2-format","read-only":true,"driver":"raw","file":"libvirt-2-storage"}' \
    -device ide-cd,bus=ide.0,unit=0,drive=libvirt-2-format,id=ide0-0-0,bootindex=2 \
    -blockdev '{"driver":"file","filename":"/mnt/user/isos/virtio-win-0.1.173-2.iso","node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}' \
    -blockdev '{"node-name":"libvirt-1-format","read-only":true,"driver":"raw","file":"libvirt-1-storage"}' \
    -device ide-cd,bus=ide.0,unit=1,drive=libvirt-1-format,id=ide0-0-1 \
    -netdev tap,fd=37,id=hostnet0,vhost=on,vhostfd=38 \
    -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:02:28:25,bus=pci.0,addr=0x2 \
    -chardev pty,id=charserial0 \
    -device isa-serial,chardev=charserial0,id=serial0 \
    -chardev socket,id=charchannel0,fd=40,server,nowait \
    -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 \
    -device usb-tablet,id=input0,bus=usb.0,port=1 \
    -device vfio-pci,host=0000:29:00.0,id=hostdev0,bus=pci.0,addr=0x5 \
    -device vfio-pci,host=0000:29:00.1,id=hostdev1,bus=pci.0,addr=0x6 \
    -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
    -msg timestamp=on
    2020-10-04 19:09:08.505+0000: Domain id=27 is tainted: high-privileges
    2020-10-04 19:09:08.505+0000: Domain id=27 is tainted: host-cpu
    char device redirected to /dev/pts/1 (label charserial0)

     

  6. EDIT: FOUND THE ISSUE! Logs.... 

     

    Hello,

     

    I have installed ZoneMinder using the image on the community app store, My app config path (/config) is set to my SSD and data path is set to my HDD shares and everything seems to save in the right location.

     

    But my Docker image file seems to be growing 5-10% a day to a point where I have to reinstall the docker container and cannot get my head around what is causing it? Is anyone familiar with ZoneMinder or know why the docker image would keep growing so quickly.

     

    Before having zoneminder it would be on 22% all the time

  7. 1 hour ago, trurl said:

    20G docker image should be more than enough, and making it larger won't fix anything, it will just make it take longer to fill.

     

    Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post.

     

    Also, post the docker run command as explained at this very first link in the Docker FAQ:

     

    https://forums.unraid.net/topic/57181-docker-faq/?do=findComment&comment=564345

     

    Cheers, figured it's Zoneminder using the storage - I will move to their forums and troubleshoot it

  8. Hello,

     

    I got my warning yesterday that Docker is exceeding the storage space so I increased it, I am now seeing it slowly creep up throughout the day.

    At the start of the day it was at 37% full and now it's at 41%

     

    The only container that I have added that is new is Zoneminder, the config is set to be stored on my SSD drive and the camera footage is on my NAS drives.

    Is there an easier way to determine which Docker is using this storage space?

  9. Hello,

     

    I need to upgrade my USB drive and my unraidOS runs pfSense. Is there an offline registration option available? 

    When I put the new USB drive in and it boots, my pfSense will never come online meaning I have no Internet (Array cannot be started) - To reconfigure my network equipment will be a nightmare, I was just wondering if there is a way I can register my new USB without the Internet enabled on the server.