icarus44_zer0

I have removed the S3 sleep plugin thanks for the tip.

It all started when I bought some new drives. They would not add to the array. After preclear failed... I was able to diagnose that I had a bad memory module on one of my dims. After weeks of Downtime (I'm very busy) and now I'm just looking to start from scratch. Bought 3 new drive. Pre cleared all of them. They all passed. However Failed to format. But show as XSF. However the amount used is kind of sketchy. However this may be an inaccurate reading. Now the fun stuff starts. The server shuts down after 30 mins. Here's the syslog... Searching online hasn't brought much luck so far. Again the server was up for two days clearing the drive... Added them to the array and now she shuts down after ~30 mins. I'm willing to start from scratch. I pulled the drive that had my data on them when things started getting really weird. Hopefully I can rebuild the server then migrate my data back onto the array. So much has gone wrong not sure what on earth to do next. Thanks in advance, The_Crimson_King_19 Mar 16 11:37:07 Kronos kernel: ACPI: EC: interrupt unblocked Mar 16 11:37:07 Kronos kernel: pcieport 0000:00:1c.0: Enabling MPC IRBNCE Mar 16 11:37:07 Kronos kernel: pcieport 0000:00:1c.3: Enabling MPC IRBNCE Mar 16 11:37:07 Kronos kernel: pcieport 0000:00:1c.0: Intel PCH root port ACS workaround enabled Mar 16 11:37:07 Kronos kernel: pcieport 0000:00:1c.4: Enabling MPC IRBNCE Mar 16 11:37:07 Kronos kernel: pcieport 0000:00:1c.3: Intel PCH root port ACS workaround enabled Mar 16 11:37:07 Kronos kernel: pcieport 0000:00:1c.4: Intel PCH root port ACS workaround enabled Mar 16 11:37:07 Kronos kernel: pci 0000:01:00.0: can't change power state from unknown to D0 (config space inaccessible) Mar 16 11:37:07 Kronos kernel: pcieport 0000:00:1c.7: Enabling MPC IRBNCE Mar 16 11:37:07 Kronos kernel: pcieport 0000:00:1c.7: Intel PCH root port ACS workaround enabled Mar 16 11:37:07 Kronos kernel: pci 0000:01:00.1: can't change power state from unknown to D0 (config space inaccessible) Mar 16 11:37:07 Kronos kernel: ACPI: EC: event unblocked Mar 16 11:37:07 Kronos kernel: sd 4:0:0:0: [sdb] Starting disk Mar 16 11:37:07 Kronos kernel: sd 9:0:0:0: [sdc] Starting disk Mar 16 11:37:07 Kronos kernel: sd 10:0:0:0: [sdd] Starting disk Mar 16 11:37:07 Kronos kernel: serial 00:06: activated Mar 16 11:37:07 Kronos kernel: r8169 0000:06:02.0 eth1: Link is Down Mar 16 11:37:07 Kronos kernel: ata8: SATA link down (SStatus 0 SControl 300) Mar 16 11:37:07 Kronos kernel: ata7: SATA link down (SStatus 0 SControl 300) Mar 16 11:37:07 Kronos kernel: ata6: SATA link down (SStatus 0 SControl 300) Mar 16 11:37:07 Kronos kernel: ata3: SATA link down (SStatus 0 SControl 300) Mar 16 11:37:07 Kronos kernel: ata1: SATA link down (SStatus 0 SControl 300) Mar 16 11:37:07 Kronos kernel: ata5: SATA link down (SStatus 0 SControl 300) Mar 16 11:37:07 Kronos kernel: ata2: SATA link down (SStatus 0 SControl 300) Mar 16 11:37:07 Kronos kernel: e1000e 0000:00:19.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Mar 16 11:37:07 Kronos kernel: ata4: link is slow to respond, please be patient (ready=0) Mar 16 11:37:07 Kronos kernel: ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Mar 16 11:37:07 Kronos kernel: ata10.00: configured for UDMA/133 Mar 16 11:37:07 Kronos kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 16 11:37:07 Kronos kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20200925/psargs-330) Mar 16 11:37:07 Kronos kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) Mar 16 11:37:07 Kronos kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20200925/psargs-330) Mar 16 11:37:07 Kronos kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) Mar 16 11:37:07 Kronos kernel: ata4.00: configured for UDMA/133 Mar 16 11:37:07 Kronos kernel: ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Mar 16 11:37:07 Kronos kernel: ata9.00: configured for UDMA/133 Mar 16 11:37:07 Kronos kernel: OOM killer enabled. Mar 16 11:37:07 Kronos kernel: Restarting tasks ... done. Mar 16 11:37:07 Kronos kernel: PM: suspend exit syslog.txt

SOLVED: From the terminal on the server - booted into UNRAID with GUI - USER -> ROOT -> PW UI login now functions as expected

The Facts. When to login one day. PW failed. I use a PW manager. Thought maybe my PW manager was corrupted. Checked backup. PW was correct. Followed the steps listed in Password Recovery. Issues persists. After following these above steps. Unraid login UI presents the following errors Warning: file(/etc/nginx/htpasswd): failed to open stream: No such file or directory in /usr/local/emhttp/login.php on line 23 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/login.php on line 23 SSH into the server with ROOT and null as PW. nano /usr/local/emhttp/login.php line 23 foreach (file('/etc/nginx/htpasswd') as $strCredentials) /etc/nginx/htpasswd - no such file or directory. ls -a - nope find: ‘htpasswd’: No such file or directory it looks like I lost/destroyed/corrupted this file somehow. Final attempt - from the console on the server login as ROOT - "passwd" - change root PW... PW accepted. Restart. Issue persists. Possible Solutions. Create a new install on a new USB.. My current usb is about 5 years old. I have not researched what the effects of this would be. Darsy Posted March 5, 2020 https://forums.unraid.net/topic/88712-i-cant-login/ (highly unrecommended by admin team... however does work). Create the htpasswd file directly on the USB. Not sure what this would entail Change line 23 to point to a different dir. Unsure of the ramifications Side Note - Did not solve problem https://forums.unraid.net/topic/88712-i-cant-login/ Thanks in advance... Open to all helpful suggestions, comments, and/or questions.

Not sure whats wrong here. Restarted docker and server. Only 2 of my 5 Libraries populate. I have an appdata backup. Should I restore?

Been at this issue here and there throughout the day. Sorry everyone else is down also.... Hopefully fixed soon.

Loving the setup of my new unRAID server and found this docker to be super useful for setting up my home cctv/security system... Thank you.... Really struggling to find information about how to set up ZM ninja properly for use when I'm not in my local network. From what i can find. I need to use duckdns and lets encrypt along with some port forwarding. Spaceinvader One's video covers the basic setup. But I have no clue how to make the custom subdomain.conf file for Zoneminder. Tested several variations with no success. Can someone please point me in the right direction. zmNinja has some documentation here but again I'm pretty noob to all of this. TIA.