PlasmaEye

Yep, resolved.

I got it to work. I went into the "nvme" pool config at /boot/config/pools and noticed that the "diskFsProfile" was set to "single". I changed that to "multiple" which was incorrect but that got Unraid to update that profile with the correct value of "raid1". After that it took "nvme0n1" and started a btrfs balance operation and everything came back up. The "nvme" pool still had a missing device on it so I did have to run "btrfs dev del missing /mnt/nvme" once the array was back up. I've attached the diagnostics as well. atlas-diagnostics-20250413-0741.zip

I've made a big mistake and I need some help undoing it. I had two 1TB NVME drives ("nvme0n1" and "nvme1n1") in a BTRFS pool ("nvme"). I wanted to separate those two drives into their own individual pools and did it without consulting the docs (big mistake). The steps I took: 1. Stop array 2. Create new pool called "nvmecache" 3. Unassign "nvmen0n1" from "nvme" 4. Assign "nvme0n1" to "nvmecache" 5. Start array After starting the array I started getting warnings about the "nvme" pool missing a device "nvme0n1" and realized I had done this all wrong. So then I took the following steps: 1. Stop array 2. Unassign "nvme0n1" from "nvmecache" 3. Delete "nvmecache" pool 4. Reassign "nvme0n1" to "nvme" pool But now I'm not able to start the array due to the warning in the title: Wrong Pool State - "nvme" - too many wrong or missing devices. How do I get "nvme0n1" back into the "nvme" pool? Output of "btrfs fi show": warning, device 2 is missing Label: none uuid: 22c8d4c7-5b45-4a53-935c-4a3de560b69d Total devices 1 FS bytes used 180.03MiB devid 1 size 232.89GiB used 4.03GiB path /dev/sdf1 Label: none uuid: 65338527-9b1d-46b4-bede-49416cdc67c5 Total devices 2 FS bytes used 477.48GiB devid 1 size 931.51GiB used 521.03GiB path /dev/nvme1n1p1 *** Some devices missing Label: none uuid: 651ae8a2-a9c4-4d74-a2f1-b6813c030b32 Total devices 1 FS bytes used 144.00KiB devid 1 size 931.51GiB used 2.02GiB path /dev/nvme0n1p1