ChatNoir

And the required Array device requirement will probably disappear in the coming months/years.

I don't remember and I never used it myself. But it seems to use a ASM1061 that is on the recommended list, so that's probably what I said then. No problem, the PCIe 3.0 of your motherboard is backward compatible with the previous generations of PCI Express. One lane of PCIe gen2 is rated to 500MB/s, it should be fine for 2x HDDs It seem to use a JMB582 (2 ports PCIe 3.0 x1) and looks to be from the same product family than the JMB585 that is recommended. JorgeB might have an opinion on that, but it looks fine for me. Since your motherboard is PCIe gen3, why not go for a 4 ports controller instead ? That would leave you room to add more drives in the future. The ASM1064 is gen3 and only uses one lane. (1x gen3 = 985 MB/s) https://www.amazon.com.be/s?k=ASM1064&i=electronics&crid=1N22TYXDOEUOD&sprefix=asm1064%2Celectronics%2C56&ref=nb_sb_noss

The question is "how is ext4 handling errors, FS corruption, etc." ? As dada051 says, its one more option. Certainly people will choose it and might have problems if its less reliable or less capable of recovery.

It is unclear for me if you are using Unraid. Seems not. Not sure anyone can help you if you are on Ubuntu with different tools.

Difficult to provide much advice, you should provide your diagnostics.

Merci d'avoir partagé la solution si quelqu'un d'autre a le problème.

I don't know much about SAS drives. As for knowing in advance if the drive will have that, I can't say either. From what I read here, I think it is part of the SATA spec for some usecase, not sure the manufacturer indicate that on the specsheet.

That's a better option The JMB575 in the first proposal are port multipliers and are not recommended.

The goal is not to provide 3.3V to the drive, people tend to use one of those 3 options : use Molex to SATA adapters use Kapton tape on the 3.3V contact on the drive to prevent the issue (one example of tutorial : https://www.instructables.com/How-to-Fix-the-33V-Pin-Issue-in-White-Label-Disks-/ ) cut the 3.3V cable on the power SATA cable (not sure which one it is myself) I prefer #1 but already used #2 on some drives. I don't love #3 myself but some seem to chose that route.

@SpencerJ

Which can be fine as long as you double the number of PCIe lanes. Here, it is still 8 SATA ports on a x1. Unless I made a mistake on my (early morning) math, even HDDs will have their max bandwidth seriously limited.

Well, ArtofServer is generally considered a good choice for north america, so I would guess that people didn't had much to offer after your first post. On my part, I bought one HBA in Europe. It went well, but I can't say if that's because it was a great seller or some luck. So I don't think my opinion on the subject is super interesting. I think that in general, you don't buy an HBA very often and it's not super expensive. ==> limited experience + small cost = small overall engagement If you ask for something that is either more expensive, that you buy more often or have a bigger impact on the system, people will tend to have opinions (not always based on facts, but opinions nonetheless) Ask about hard drives and you will have all three and plenty of feedback. If you are lucky, some might even be good.

Just tried, it seems down indeed.

I would say to ask in general support : https://forums.unraid.net/forum/55-general-support/

Since the 14th series is a simple refresh of the 13th, I don't think there should be any issue. Any architectural change that I might be missing ?

Je viens d'essayer, mais en effet je n'arrive pas à sortir du container. Le dossier partagé ne peut se créer que dans le volume existant créé dans le template. Mais je n'ai pas trouvé comment créer un nouveau Volume dans 'Storage' qui pointerait sur /storage comme proposé dans le template. Il y a peut-être une subtilité que je rate ? 🤔

Je crois avoir vu passer des choses de ce type ailleurs sur le forum. Mais pas de souvenir dans la section francophone.

Wait what ? I was not aware of any uniform !

Hi, @Pindaroli, new users first post must be validated by a mod/admin. I validated one of your 4 posts and hid the others. Not sure that it is the most up to date. I'll let you edit if needed.

I don't think an Unraid licence can be sold. If you do, the buyer might not be able to receive support from the contact form. https://unraid.net/policies

It is already in the works. Should be available for 6.13 or 6.14.

Have you tried doing that using the network path instead ?

Looks like the Uncast episode is out : Didn't had time to watch it yet, so I cannot comment on the content. Just realized that I should have watched it before posting ... Not the right Uncast.

probably the log and what driver is loaded at startup.