mryanp

I'm attempting to install inventory-hunter from docker hub: https://github.com/EricJMarti/inventory-hunter I add a variable for alerter using alerter or plainly a and set it as discord, but I'm receiving this error when attempting to start the container: run.py: error: the following arguments are required: -a/--alerter Any suggestions?

To sort of put a bow on this I haven't removed the protection, but my server was randomly shutting down. I changed the PSU settings in my BIOS to performance and that corrected the shutdown issue, but it also somehow seems to have solved the read error issues. I'm not sure why, but seems like the protection was not causing the errors.

Additional thing to note, I’m getting tons of errors on the main page, but everything seems to be working fine.

Thanks, two questions, I’m curious why I never received the error prior to moving to the new hardware? New HBA? also, looking through and it appears all of my disks are formatted this way including parity 1 and 2. Curious how I get everything cleaned up without data loss?

Thanks for the reply, attached is the FCP errors and here is the diagnostic tower-diagnostics-20200613-1011.zip

Having disk errors in fix common problems after moving to new hardware. I went from an R710 to an R720xd. The SMART errors are the following (even though everything in the GUI says healthy Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 3710704742 3 0 3710704745 3 362980.544 0 write: 0 0 0 0 0 66755.906 0 verify: 64 0 0 64 0 0.000 0 Noticed they're all identical, don't know if that matters. I never had a problem before moving to the new hardware today. These are 6TB Seagate SAS drives FWIW.