Nexus

Hi all, I am hoping you can help. I installed the latest "binhex-minecraftbedrockserver" - and I can start it up and join it from my Windows PC BUT: I can NOT make myself an OP. I am using 'op (mygamertag)' and get an error. I looked at all the documentation and watched some videos, and can't see what I am missing. Can someone help? Also: Is there a recommended GUI front end for server management for bedrock? I'd prefer that vs editing a file on the server.

Following up: I did what you did @Todo88 - and it still did not work. I even left the docker service off to ensure nothing was happening there. @EDACerton should I see entries for your plug in the Unraid network routing table? I see one for Tailscale, but not sure if that's from my docker install (that is completely removed now) Update: Ok, did a complete reboot of my laptop as well, fired up Tailscale and then I saw the option to reauth. Thank you @Todo88 for the pointer and @EDACerton for your help and the plugin.

I think you are right...as I was staring to think that the Tailscale docker I had running for so many months (it's off now) did something to my network settings on the Unraid side that may be blocking the Plugin from working.

I am not even getting to step 3. See below. What are the CLI commands to enable exit note and access to my local network?

Thanks @EDACerton - I reauthenticated on my laptop, and still no joy. I tried Safari, Edge and FF (on my Mac) - I can't get past VIEWING. I am completely stumped.

Hey gang - how do I set my unraid server up as an exit node AND allow access over tailscale to my network? I installed the latest version of the plugin, and want to deprecate my Tailscale Docker container. Edit: I read earlier in this thread to click on VIEWIING in the settings and re-auth - but I don't have that option Edit 2: To troubleshoot, I sent to settings, Advanced view and reset tailscale. Signed in again, and nope. Still no way to re-auth. I can only view Not sure if I just turn on "Use Tailscale Subnets" or not. But I want to be careful, I hosed my server on an early version of this plugin - but making another run at it since it's looks way more mature now (Great job) Thanks

Hi friends, I am trying to set up NPM, and I have it running with br0, and can login etc...but when I try to request an SSL cert I get an error: warning Command failed: certbot certonly --config "/etc/letsencrypt.ini" --work-dir "/tmp/letsencrypt-lib" --logs-dir "/tmp/letsencrypt-log" --cert-name "npm-4" --agree-tos --authenticator webroot --email When I test server reachability, I see this in the logs: ❯ Starting backend ... [12/31/2023] [9:04:07 PM] [Global ] › ℹ info Using Sqlite: /data/database.sqlite [12/31/2023] [9:04:08 PM] [Migrate ] › ℹ info Current database version: none [12/31/2023] [9:04:08 PM] [Setup ] › ℹ info Logrotate Timer initialized [12/31/2023] [9:04:08 PM] [Setup ] › ℹ info Logrotate completed. [12/31/2023] [9:04:08 PM] [IP Ranges] › ℹ info Fetching IP Ranges from online services... [12/31/2023] [9:04:08 PM] [IP Ranges] › ℹ info Fetching https://ip-ranges.amazonaws.com/ip-ranges.json [12/31/2023] [9:04:08 PM] [IP Ranges] › ℹ info Fetching https://www.cloudflare.com/ips-v4 [12/31/2023] [9:04:08 PM] [IP Ranges] › ℹ info Fetching https://www.cloudflare.com/ips-v6 [12/31/2023] [9:04:08 PM] [SSL ] › ℹ info Let's Encrypt Renewal Timer initialized [12/31/2023] [9:04:08 PM] [SSL ] › ℹ info Renewing SSL certs close to expiry... [12/31/2023] [9:04:08 PM] [IP Ranges] › ℹ info IP Ranges Renewal Timer initialized [12/31/2023] [9:04:08 PM] [Global ] › ℹ info Backend PID 515 listening on port 3000 ... [12/31/2023] [9:04:09 PM] [Nginx ] › ℹ info Reloading Nginx [12/31/2023] [9:04:09 PM] [SSL ] › ℹ info Renew Complete But no obvious (to me) errors. I don't know how to get past it. I have forwarded the proper ports (81,443,80) to the NGINX container IP - so I don't know where else to look. Thanks for any help/pointers. Edit: Well I tried this morning, and it worked. Must have been some issues on the LE API side. Carry on.

Same issue. Thanks to @cloudyb and the instructions I was able to get back to a working state.

Thanks. I opted to boot with no plugins loaded and delete the plugin and plugins directory and reboot. I'll wait a bit until wiser ones than me can play around with this

I installed this plugin then ran tailscale up --advertise-exit-node --accept-routes --advertise-routes=192.168.1.0/24 Now, my system is unresponsive and I had to do a hard reboot and it's not coming back I need to go hookup a keyboard and display to try and recover. Any ideas where to start?

Thanks - using open trackers. I tested a few from TPB (TESTING ONLY!) and they fell victim to the same issue. Downloads never starts. I will look again for anyone w/ Windscribe issues. In the config- I did enter my windscribe credentials. Do I need do that since they are contained in the .CONF file I dropped in the /wireguard/ directory ?

Here is my run command and download settings in the attached screenshot.

Hey all, I installed DelugeVPN today, and was able to add my Wireguard credentials. I can open up the UI and add torrents, but the torrents never seem to start. I tried a few torrents, and even the official Ubuntu torrent - and nothing ever starts. Note: I am using Windscribe VPN. Any idea where to look? I took at peel at the logs and nothing jumped out at me.

Thanks. I made that change. Thank you

I looked in the log, and all I see is the machine event error. I turned on mcelog and I don't see anything specific being logged.

I’ll pull the 16 G out. Re the machine error - where can I find the logged? I enabled mce - but don’t know where to get details

Curious. Thanks. Where can I see that error in the logs I submitted? They are showing the same speed in the BIOS but clearly they are not?

Damn it. It did it again. I was streaming a movie from my plex container, checked the UI to see if it was using hardware encoding and went to the UI and it was unstable. My system crashed - AGAIN. I can't SSH into the box and now I have to do ANOTHER power cycle. This is supremely frustrating. Is there another way I can direct & timely support from Limetech? While I appreciate the peer to peer model, I'd prefer a more direct line to the company Attached are logs after this crash More logs.zip

Following up: Today the Scrypted container siezed up. I had to stop the Docker services and then they would not restart. So I took the array offline and did a clean reboot. Attached are logs from the USB boot drive and two system diagnostics: One before reboot and one after Archive 2.zip

Thanks Jorge. I have done that, and I will share that when the inevitable crash happens

I have been running an Unraid server for about 3 years, and recently completed a build that was built around lower energy consumption, lower temps and more energy efficient parts. Prior to this build, I was running Unraid on an old gaming pc that was loud, sucked down energy and huge. So my new server footprint is much better (smaller) and all around happy with the hardware side of things. BUT: Something is tremendously wrong with my current set up. Specifically, my docker set up seems tremendously unstable and frankly quite fragile. I am running the following: AdGuard-Home binhex-krusader Cloudflare-DDNS HomeBridge NginxProxyManager Plex-Media-Server Portainer scrypted And I *THINK* it's either scrypted or Plex that is causing problems. For the past few weeks, each morning I wake up and 25% of the time - the UNRAID webui is not responding and I can't SSH in to the box. I need to do a hard power reset. Of course after the system comes back it wants to do a parity check. During one of these resets it corrupted my Plex DB (that I migrated from my v1 server without issue) - while the media files are fine, I lost all the additional metadata (lists, closed captions, cover art) So I don't know how to recover that part of the equation. I thought the way Docker was designed is that it's not supposed to bring down the host. Why does this keep happening? Any idea where to start trying to get things back to a stable place? I am stumped. Thanks.

Glad this thread was able to help you. I'd love if some of the big brains around here could explain WHY fast boot causes some MoBo's to be unable to boot from the USB.

I have spent some time tonight trying to get it to work, and I am NOT having success. In Bridge mode, Adguard complains it can't reach the internet. I don't know what to do - is it something in my Unraid network config? I did nothing to the network settings or the routing table specifically. This is a new install of Unraid (about 2 weeks old)

I am not using any filtering on my network at all. I have zero issues connecting to any servers from my network. My network is all Ubiquiti with a pretty vanilla set up (no vlans) What I did notice was that if I create the container using bridging - then it appears to work fine (can update the list) but I really want to run it as a custom network so I don't port issues sharing my Unraid's IP

I am using the official adguard docker container and when I use a custom network type (so that the container gets a unique IP from my router) - I can't get Adguard to update it's list and am unable to add any new blocklists. No idea why, as I did not change any variables - I just installed it as is. Any idea what I can do here? I am not that new to UNRAID, but this has me vexxed. Logs