mc_866

Thanks for the help!!

I want all the data on the nvme and to revert back to a single cache drive. it only shows a single drive in the gui, is there a way to change it back to a single drive?

I messed up and rather than starting a new cache pool as I had meant to do with my 2 512 SSD's I incorrectly added them to a pool with my 2TB nvme cache drive. I stopped the array and removed the drives and the slots. So now I'm down to a single cache drive First it was incorrectly showing 1.5TB capacity so I ran the balance and it didn't change things. I did some research and found the post below: So I ran the command below to try and convert back to single vs raid1. Single: requires 1 device only, it's also the only way of using all space from different size devices, btrfs's way of doing a JBOD spanned volume, no performance gains vs single disk or RAID1 btrfs balance start -dconvert=single -mconvert=raid1 /mnt/cache I actually ran that twice but am left with 3TB showing above. Here is a view of the balance status and it appears it's still in Raid1 I was of the impression the convert command was supposed to change this. Also I don't see the drop down next to the balance button shown in the post above. Any other ideas on how to get this corrected back to a single drive with 2TB of capacity?

Appreciate that thanks! Can I just copy the info from config/plugins/dockerMan/templates-user over to my new USB drive? Is that safe? Alternatively if I just re-install is there any chance my settings stay? When I look at some of the dockers it appears my settings are there. Or can my backup from appdatabackup, can I pull out the templates from that backup that I created a couple weeks ago?

I had a complete fail on my usb while away on vacation, always nice to come home to a catastrophic failure. Good news was I did have a USB backup, bad news was that it was 4 months old and before I had added a few new drives. I've been able to get the array back and running because I knew which drives were parity. I opted for a new config and my data all seems intact which is great. Trouble now is that my dockers seem to be giving errors and aren't running correctly. I have a recent appdata backup I tried to restore but that didn't seem to work. Is there a way to restore my dockers without completely reconfiguring them?

I'm having difficulty getting the backup to start from my Android device. I've installed and configured the container on my unraid server. I've created a user and can see the Lomorage instance from the Android app. I've successfully logged in and connected to the Lomarage instance from the Android app. On my phone it says x assests needed to backup. Drag down to start. I pull down and the circle spins but it doesn't look like any data has been sent or any photos backed up.

I set both plex containers to not auto start. Rebooted Started binhexplex and started streaming a title that would require transcode. Still nothing hitting the GPU.

Ver Version 1.20.0.3181 for binhex plexpass

Turned linuxserver.io container off. Double checked my settings in this container and tried turning it on and streaming the same content and no GPU kicks in.

Plex ver 1.19.5.3112

Nvidia driver version 440.59 Nvidia unraid version 6.8.3 Where do you see your plex version?

I used the watch nvidia-smi in console. No activity with this container. Linuxserver.io container shows the GPU doing the work

Yes, this is what my setup looks like

I followed these instructions and watched the spaceinvader one video but it didn't work with this container. I installed the linuxserver.io separately and the hardware transcode worked right away. I'd like to get that working on this binhex container.

Is Nvidia HW transcoding working with this docker? It's been my go to and has been great but I just got a quardo P400 card to help with some transcode and I can't seem to get it to work with this docker. For reference I was able to try out the Linuxio docker and it worked straight away. I'd prefer to stay with this docker if I can.