elmetal
-
Posts
84 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by elmetal
-
-
Just now, itimpi said:
In which case the container does not need to access the gateway itself (it is just accepting inbound requests FROM the gateway) as long as you can access the container via the wg3 network remotely then that should be enough.
that's a great point I didn't think about the fact that it just needs to accept inbounds and not outbounds...
Guess I have some testing to do -
sorry, forgot to mention: The docker does need access to the internet. and since it'll need to be accessed from the internet (for gameplay)
-
So I am having an issue I need help with.
I currently run all my dockers on the default bridge. Everything works great.
What I want to do is one specific docker I want to open to the world (it's a MC server) and I want to use this as a "testing the waters" point for a new idea I had.
I want my new docker to be connected to the internet. I want to be able to manage said docker. But I do not want that docker to access my LAN or my server.
Some assumptions:
Gateway/Router = 192.168.1.1
unRAID = 192.168.1.10
What I was thinking was the docker could live in maybe its own wg network, call it wg3 (wg0-2 already in use for other things). then somehow wg3 needs access to the gateway, but only the gateway.
then when I Need to manage the docker I could also join wg3 by connecting to the VPN as a client.
1: does this sound like a good idea?
2: I tried putting it on wg3 and while I can get on wg3 with my computer, the docker cannot see the outside world...
-
Works here now. updated 7:15am eastern on 3/12
-
1
-
-
Just realized everyone is having htis issue
-
Been using this tool forever! Love it.
Recently I removed the image (because I'm an idiot and didn't read the prompt when it asked if I had chosen the right docker to remove.
Anyway. I re-added via CA appstore and here's the error I get on startup...
-
On 6/20/2018 at 2:28 PM, jbartlett said:
The others were reporting that error while scanning their hardware. This is the first I've seen it while doing a benchmark. Can you post a screen shot? You do not need to include the Java Stacktrace.
It just started working after a reboot... wtf?
-
On 5/21/2018 at 4:53 PM, fiore00713 said:
I have since updated to 6.5.2 and seem to be having some issues still
It doesn't seem to be on all dockers but when attempting to stop/start/restart it gets stuck at [s6-finish] syncing disks.
It does appear to finally stop/restart however it takes FAR longer than it should (took several hours over the weekend)
Wondering at this point if it may be an issue with my docker image, if it would be worth re-creating? Unless there's something else I should try
was it your image? I am having the same issue
-
I too am getting the Array index [2] out of range, array size is [1] when trying to benchmark
-
Hey guys. Been running unRAID for about 7 years now, and I just got ahold of a "new" to me server that is running a Phenom 2 x6.
I am wondering if the newest build of unraid supports CnQ and C1e and all the power saving functions so I am not wasting needless moneyAlso, how do I check that?
-
dead links in main post. anybody have final version vmdk for 5.0?
-
I have the exact same issue. Is there a way to tell unraid to ignore the redball and continue as if it were green?
and then rebuild the truly missing drive?
I am certain my redball happened from an unsafe shutdown, the drive is 100% ok.
-
Hey guys
running 5.x
I have 10 drives in my array. 9 drives and a parity.
Here's what happened.
I had a drive redball, and within a couple of hours I was ready to replace it since I keep some warm spares in my server. Took the array offline, Drive # 8 was redballed so I planned on replacing it with a precleared drive that I had ready to swap.
As soon as I took the array offline, drive #3 disappeared. It didn't go red, it just disappeared. I've experimented with moving it to a different slot in my case (since I have NORCO 5x3 enclosures) and no matter what I do, when I boot up unraid, I cannot see that drive to place it back in slot #3.
Now here's the fun part. Drive #8 shows fine in long SMART test. I assume it redballed due to a hard shutdown when my power surged enough to kill the battery on my UPS.
And then somewhere along the way drive 3 disappeared. I saw the drive there on the array everything fine. As soon as I unmounted the array, drive 3 was never again seen by the OS.
My question is: Is there a way I can tell unraid: Drive 8 is fine, just use it, and then rebuild drive 3 on a clean drive? because as of right now I have a dual drive failure.
I thought the TRUST MY ARRAY feature would work (I haven't tried it) but I want unraid to accept my current drive 8 as if it had never failed. is there somewhere I can change a setting to let unraid ever forget that it redballed? I'm willing to accept the risk.
-
Esxi is on a thumb drive.
Drives plugge d in to all ports. I'm not near the server I can't check the ID unless I can use the vsphere to do it
Have you double checked to make sure IOMMU and the other Virtual setting are turned on in the bios?
I honestly have not tried to passthrough all the sata ports being filled and the drive on Port 5 not being used by ESXi / Xen. Perhaps that might be an issue, I do not know.
There are countless people who have no problems with the ASRock Extreme 3/4 on ESXi / Xen and passingt hrough the onboard sata ports (at least the first 4). Go look in the virtualization section in Hard Forum and post there as well. There are A LOT of Virtual Server Experts on there who have our motherboard and use ESXi (I do not) in all kinds of various ways.
Thanks
-
Bios was updated 2 weeks ago, and using ESXi
On my motherboard the onboard sata port PCI ID is 11.0. Is it the same on yours?
Do you have a drives hooked up to it? Is the OS on any of them? If so, is it on sata port 5?
Esxi is on a thumb drive.
Drives plugged in to all ports. I'm not near the server I can't check the ID unless I can use the vsphere to do it
-
I know how to do passthroughs...... I just can't do the onboard, it just doesn't show up for me. I can passthrough all my M1015s on ESXi but onboard I get nothing. I have to check it out later I can't do it atm
If you haven't, upgrade your BIOS.
It would also help us out if we knew what you are using. ESXI or Xen.
Bios was updated 2 weeks ago, and using ESXi
-
Both ESXi and Xen
How? You do it in the software on ESXi or Xen. Tons of documentation and users to help you when you are ready.
I know how to do passthroughs...... I just can't do the onboard, it just doesn't show up for me. I can passthrough all my M1015s on ESXi but onboard I get nothing. I have to check it out later I can't do it atm
-
grumpybutfun, what MB did you go with?
I am wanting to move into VM and have been trying to decide on a MB/CPU combo as yell. I am AMD currently and always like them plus saving money.
ASRock 970 EXTREME4 AM3+
With the above motherboard, you can passthrough sata ports 1 - 4 and leave port 5 for a OS / datastore drive. Onboard NIC works in both too. This motherboard can also handle 64GB of memory and you don't have to install memory in pairs.
There is a thread somewhere here on the EXTREME6... I wouldn't get that one if I was you. Get the EXTREME3 or EXTREME4.
Can you pass them through in ESXi or only on Xenserver?
if so, how???
-
So I can't really be going the way I'mgoing with a phenom II X4 965?
I mean it'll work. I would just like the added benefit of ecc ram... damn!
...if you *want* to stick to the CPU, go for an ASUS AM3+ board.
Almost al of them support ECC ...and still support AM2+ AM3 socket CPUs as well.
Like with the M5A99FX PRO R.2.0: http://www.asus.com/Motherboards/M5A99FX_PRO_R20/#specifications ..ECC and support for your CPU...the 990FX chipset will support IOMMU...no idea if this is enabled in BIOS though.
Would this board support registered ECC ram or ony unbuffered
-
so a 1015 in IR mode can be used as a Datastore RAID 1. right?
-
Newegg had a pretty good promo on this controller the other day, I think I got it for $138.
http://www.newegg.com/Product/Product.aspx?Item=N82E16816118114
I've not set it up yet, but but my plan is also to put my datastore on a mirrored RAID array.
I verified this was on the VMware HCL so I don't have many concerns.
It's pretty basic, no additional memory or battery backup etc... on this card.
at that price I can just get another m1015 and flash ir in IR mode and do that for <90 bucks.... right?
-
The link doesn't work. Zip and attach the syslog.
I deleted the log off my dropbox. I'll have to get a new log soon
-
Reboot the server.
I've rebooted it a million times. problem persists.
-
Second docker network? Or just WG?
in General Support
Posted
I can access the container remotely but the container has access to the server via the wg3 address 10.253.3.1.... how can I make sure the container cannot see the server. is it possible when the server itself is its route back to the internet?