alexandrubg

Should I run a preclear for my hdd ? I managed to change the cables.

Thank you for your replies. At the moment I have a second HDD in preclearing, but after that I will change the cables and I post again if I have issues or not.

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.8-Unraid] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST10000VN0008-2JJ101 Serial Number: ZHZ0E640 LU WWN Device Id: 5 000c50 0c4c9d6bb Firmware Version: SC60 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Sep 30 15:05:32 2020 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 567) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 976) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 083 066 044 Pre-fail Always - 181010104 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 2 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 073 060 045 Pre-fail Always - 17920743 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 45 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 2 18 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 067 049 040 Old_age Always - 33 (Min/Max 23/48) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 8 194 Temperature_Celsius 0x0022 033 048 000 Old_age Always - 33 (0 23 0 0 0) 195 Hardware_ECC_Recovered 0x001a 083 066 000 Old_age Always - 181010104 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 44 (73 169 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 19532873744 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 39066002256 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 44 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Hello everyone, I just preclear one of my HDD ( Seagate IronWolf 10TB ST10000VN0008 ) and I got some errors: Sep 28 18:05:26 Tower kernel: ata5: SATA max UDMA/133 abar m131072@0xfca80000 port 0xfca80300 irq 42 Sep 28 18:05:26 Tower kernel: ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Sep 28 18:05:26 Tower kernel: ata5.00: ATA-11: ST10000VN0008-2JJ101, ZHZ0E640, SC60, max UDMA/133 Sep 28 18:05:26 Tower kernel: ata5.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA Sep 28 18:05:26 Tower kernel: ata5.00: configured for UDMA/133 Sep 28 18:05:26 Tower kernel: sd 5:0:0:0: [sdd] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB) Sep 28 18:05:26 Tower kernel: sd 5:0:0:0: [sdd] 4096-byte physical blocks Sep 28 18:05:26 Tower kernel: sd 5:0:0:0: [sdd] Write Protect is off Sep 28 18:05:26 Tower kernel: sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Sep 28 18:05:26 Tower kernel: sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 28 18:05:26 Tower kernel: sd 5:0:0:0: [sdd] Attached SCSI disk Sep 28 18:06:00 Tower emhttpd: ST10000VN0008-2JJ101_ZHZ0E640 (sdd) 512 19532873728 Sep 28 18:06:03 Tower root: /usr/sbin/wsdd Sep 28 18:06:10 Tower root: /usr/sbin/wsdd Sep 28 18:07:37 Tower preclear_disk_ZHZ0E640[19104]: Command: /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh --cycles 1 --no-prompt /dev/sdd Sep 28 18:07:41 Tower preclear_disk_ZHZ0E640[19104]: Pre-Read: dd if=/dev/sdd of=/dev/null bs=2097152 skip=0 count=10000831348736 conv=notrunc,noerror iflag=nocache,count_bytes,skip_bytes Sep 29 08:58:24 Tower preclear_disk_ZHZ0E640[19104]: Zeroing: dd if=/dev/zero of=/dev/sdd bs=2097152 seek=2097152 count=10000829251584 conv=notrunc iflag=count_bytes,nocache,fullblock oflag=seek_bytes Sep 29 23:31:41 Tower preclear_disk_ZHZ0E640[19104]: Post-Read: cmp /tmp/.preclear/sdd/fifo /dev/zero Sep 29 23:31:41 Tower preclear_disk_ZHZ0E640[19104]: Post-Read: dd if=/dev/sdd of=/tmp/.preclear/sdd/fifo count=2096640 skip=512 conv=notrunc iflag=nocache,count_bytes,skip_bytes Sep 29 23:31:42 Tower preclear_disk_ZHZ0E640[19104]: Post-Read: cmp /tmp/.preclear/sdd/fifo /dev/zero Sep 29 23:31:42 Tower preclear_disk_ZHZ0E640[19104]: Post-Read: dd if=/dev/sdd of=/tmp/.preclear/sdd/fifo bs=2097152 skip=2097152 count=10000829251584 conv=notrunc iflag=nocache,count_bytes,skip_bytes Sep 30 02:22:27 Tower kernel: ata5.00: exception Emask 0x0 SAct 0x427842 SErr 0x0 action 0x6 frozen Sep 30 02:22:27 Tower kernel: ata5.00: failed command: READ FPDMA QUEUED Sep 30 02:22:27 Tower kernel: ata5.00: cmd 60/00:08:00:e4:ac/06:00:15:01:00/40 tag 1 ncq dma 786432 in Sep 30 02:22:27 Tower kernel: ata5.00: status: { DRDY } Sep 30 02:22:27 Tower kernel: ata5.00: failed command: READ FPDMA QUEUED Sep 30 02:22:27 Tower kernel: ata5.00: cmd 60/01:30:00:00:00/00:00:00:00:00/40 tag 6 ncq dma 512 in Sep 30 02:22:27 Tower kernel: ata5.00: status: { DRDY } Sep 30 02:22:27 Tower kernel: ata5.00: failed command: READ FPDMA QUEUED Sep 30 02:22:27 Tower kernel: ata5.00: cmd 60/c0:58:00:ea:ac/06:00:15:01:00/40 tag 11 ncq dma 884736 in Sep 30 02:22:27 Tower kernel: ata5.00: status: { DRDY } Sep 30 02:22:27 Tower kernel: ata5.00: failed command: READ FPDMA QUEUED Sep 30 02:22:27 Tower kernel: ata5.00: cmd 60/40:60:c0:f0:ac/03:00:15:01:00/40 tag 12 ncq dma 425984 in Sep 30 02:22:27 Tower kernel: ata5.00: status: { DRDY } Sep 30 02:22:27 Tower kernel: ata5.00: failed command: READ FPDMA QUEUED Sep 30 02:22:27 Tower kernel: ata5.00: cmd 60/01:68:ff:ff:3f/00:00:8c:04:00/40 tag 13 ncq dma 512 in Sep 30 02:22:27 Tower kernel: ata5.00: status: { DRDY } Sep 30 02:22:27 Tower kernel: ata5.00: failed command: READ FPDMA QUEUED Sep 30 02:22:27 Tower kernel: ata5.00: cmd 60/01:70:bb:06:0a/00:00:b9:00:00/40 tag 14 ncq dma 512 in Sep 30 02:22:27 Tower kernel: ata5.00: status: { DRDY } Sep 30 02:22:27 Tower kernel: ata5.00: failed command: READ FPDMA QUEUED Sep 30 02:22:27 Tower kernel: ata5.00: cmd 60/01:88:ae:d6:d1/00:00:f3:00:00/40 tag 17 ncq dma 512 in Sep 30 02:22:27 Tower kernel: ata5.00: status: { DRDY } Sep 30 02:22:27 Tower kernel: ata5.00: failed command: READ FPDMA QUEUED Sep 30 02:22:27 Tower kernel: ata5.00: cmd 60/01:b0:44:ac:b6/00:00:b2:00:00/40 tag 22 ncq dma 512 in Sep 30 02:22:27 Tower kernel: ata5.00: status: { DRDY } Sep 30 02:22:27 Tower kernel: ata5: hard resetting link Sep 30 02:22:27 Tower kernel: ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Sep 30 02:22:27 Tower kernel: ata5.00: configured for UDMA/133 Sep 30 02:22:27 Tower kernel: sd 5:0:0:0: [sdd] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=31s Sep 30 02:22:27 Tower kernel: sd 5:0:0:0: [sdd] tag#1 Sense Key : 0x5 [current] Sep 30 02:22:27 Tower kernel: sd 5:0:0:0: [sdd] tag#1 ASC=0x21 ASCQ=0x4 Sep 30 02:22:27 Tower kernel: sd 5:0:0:0: [sdd] tag#1 CDB: opcode=0x88 88 00 00 00 00 01 15 ac e4 00 00 00 06 00 00 00 Sep 30 02:22:27 Tower kernel: blk_update_request: I/O error, dev sdd, sector 4658619392 op 0x0:(READ) flags 0x80700 phys_seg 71 prio class 0 Sep 30 02:22:27 Tower kernel: sd 5:0:0:0: [sdd] tag#11 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=31s Sep 30 02:22:27 Tower kernel: sd 5:0:0:0: [sdd] tag#11 Sense Key : 0x5 [current] Sep 30 02:22:27 Tower kernel: sd 5:0:0:0: [sdd] tag#11 ASC=0x21 ASCQ=0x4 Sep 30 02:22:27 Tower kernel: sd 5:0:0:0: [sdd] tag#11 CDB: opcode=0x88 88 00 00 00 00 01 15 ac ea 00 00 00 06 c0 00 00 Sep 30 02:22:27 Tower kernel: blk_update_request: I/O error, dev sdd, sector 4658620928 op 0x0:(READ) flags 0x84700 phys_seg 168 prio class 0 Sep 30 02:22:27 Tower kernel: sd 5:0:0:0: [sdd] tag#12 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=31s Sep 30 02:22:27 Tower kernel: sd 5:0:0:0: [sdd] tag#12 Sense Key : 0x5 [current] Sep 30 02:22:27 Tower kernel: sd 5:0:0:0: [sdd] tag#12 ASC=0x21 ASCQ=0x4 Sep 30 02:22:27 Tower kernel: sd 5:0:0:0: [sdd] tag#12 CDB: opcode=0x88 88 00 00 00 00 01 15 ac f0 c0 00 00 03 40 00 00 Sep 30 02:22:27 Tower kernel: blk_update_request: I/O error, dev sdd, sector 4658622656 op 0x0:(READ) flags 0x80700 phys_seg 98 prio class 0 Sep 30 02:22:27 Tower kernel: ata5: EH complete But the SMART is telling me that there are no errors: This HDD is good or not ?