syntaxx

Hi, I am currently using IBM M1015 raid controller and I will be visiting the states this November. I am wondering what can you suggest a replacement for it? I am getting ready for a possible breakage as it has been with me for years now. Thanks!

So its probably my fan then.. Hmmm.. its not even a year since I bought my cpu.. probably need to change it to a high end cooling fan. Any recommended cpu cooler for LGA 1151? Liquid or Fan..

My bad.. here is my diagnostic.. unraid-diagnostics-20170604-1948.zip

Hi, can someone help me with mce errors? Attached is my diagnostic. syslog.txt

I upgraded to 6.2.4 and upgrade the docker image. But it won't start.

Here's mine. I am getting iommu_group are bound to their vfio bus driver. Also note that I have ACS override set to ON. Is there a way I can use 04:00.0 without affecting 03:00.0? Thanks lspci 03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 04:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03) IOOMU Groups /sys/kernel/iommu_groups/6/devices/0000:03:00.0 /sys/kernel/iommu_groups/6/devices/0000:04:00.0 XML Dump <device> <name>pci_0000_04_00_0</name> <path>/sys/devices/pci0000:00/0000:00:1b.3/0000:04:00.0</path> <parent>pci_0000_00_1b_3</parent> <driver> <name>xhci_hcd</name> </driver> <capability type='pci'> <domain>0</domain> <bus>4</bus> <slot>0</slot> <function>0</function> <product id='0x0014'>uPD720201 USB 3.0 Host Controller</product> <vendor id='0x1912'>Renesas Technology Corp.</vendor> <iommuGroup number='6'> <address domain='0x0000' bus='0x00' slot='0x1b' function='0x0'/> <address domain='0x0000' bus='0x00' slot='0x1b' function='0x2'/> <address domain='0x0000' bus='0x00' slot='0x1b' function='0x3'/> <address domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> <address domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </iommuGroup> <pci-express> <link validity='cap' port='0' speed='5' width='1'/> <link validity='sta' speed='5' width='1'/> </pci-express> </capability> </device> XML Code <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </source> </hostdev>

Thanks, I hope you'll add it in the future

Limit in what way. Speed? Size? Dropbox syncs all contents of the client folder by design. limit the bandwidth. https://www.dropbox.com/en/help/9192 this one shows that you can throttle it.

Hi, I am not sure if this has been asked. But anyone of you know how can I limit the dropbox docker upload? What Environment variables should I put? Thanks

I am planning to pass-through my usb pci card and put a powered USB Hub. Any powered USB Hub recommendation? Thanks

^

up! is this a good pcie usb controller? Sedna - PCIE 7 Port USB 3.0 Adapter Card ( 7 External Ports ) with SATA Power Connector , ( NEC Host controller )

Hi, I have changed my motherboard and realized that it only have 1 USB controller so I need to add 1 more USB PCIe for passthrough. Any suggestions which one to use? I prefer 4-6 usb ports. Thanks

Hi, I have an unraid with windows vm (all purpose including gaming) at the moment and I am planning to upgrade since my wife already gave me the go signal to do so. Current: Unraid 6 Pro (Latest) Motherboard: ASUSTeK - P8H77-M CPU: Intel® Core™ i5-3570 Processor 3.80Ghz Memory: 16 GB Hard Disk: 4x2TB Cache Drive: 1x750GB Controller: 1xM1015 Network: 2xIntel Nic 1Gbps UPS: Back-UPS CS 650 PSU: Antec Modular Platinum 1000w Graphics: HD7850 To Future: Unraid 6 Pro (Latest) Motherboard: GA-Q170M-D3H (Choosing this for vPro) or ASRock Q170M vPro CPU: Intel® Core™ i7-6700 Processor Memory: 2 1x16GB (DDR4) ? (I am not sure if I can still use my DDR3 on my previous?) Controller: 1xM1015 Network: 2xIntel Nic 1Gbps UPS: Back-UPS CS 650 PSU: Antec Modular Platinum 1000w Graphics: HD7850 Or any suggestion? Will it work?

I think I have experience it. If you passthrough just the usb device it will work only on startup of the VM. However, if you pull it and you plugged it in again it will not work. You need to passthrough the entire usb controller to make it work.

ok cool! I bought it just for the sake of future upgrades. Thanks a lot!

is Antec 80+ Platinum HCP 1000w good enough for 9 hard disk, a GPU radeon hd 7850, i5?

+1

I have all the virtualization set to on. I will try to fiddle with the bios this only happened when i switched to unraid 6. Also I see in the web about intel_iommu=pt instead of on. not sure if it works on unraid.

What is this? I am getting this in my syslog and dmesg. 00:1d.0 is my usb passthrough. I also noticed that this one will slow down my transfer rate. 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) Thanks

Everything is okay now. Thanks CHBMB

Here's my log https://www.dropbox.com/s/90lxd9e0jquvykk/unraid.png?dl=0

Where did you find that? In what directory?

gfjardims.

Is this already fixed? I am having the same problem. Also getting those DMAR Oct 26 15:11:50 unRaid kernel: dmar: DRHD: handling fault status reg 3 Oct 26 15:11:50 unRaid kernel: dmar: DMAR:[DMA Read] Request device [00:1d.0] fault addr ef000 Oct 26 15:11:50 unRaid kernel: DMAR:[fault reason 06] PTE Read access is not set This time its my passthrough usb controller. 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) Thanks