wickedathletes

Guess I don't have that installed? plugin: updating: unassigned.devices.plg plugin: unassigned.devices.plg not installed

I can boot into unraid, but GUI mode or via the network the GUI won't come up. Trying to figure out how to debug this. This is a rebuilt server (same array, same flash, new cache drive). All drives appear to show and I can SSH into it, I just can't view the UI at all. Any thoughts or tips or how to even get logs via ssh would be much appreciated

thanks, the EFI folder did the trick. Unfortunately now the GUI wont boot, but I can boot not into GUI mode. Could this have anything to do with having a GPU before and not having one now? I switched to an i7-11700K, so I don't need my 1660Ti anymore. Trying to figure out what would cause this.

So I am rebuilding my server and today was the day! Machine build went fine, but I can't get it to boot from my USB. All parts were replaced except pool drives and flash drive. Cache became an NVMe drive. Motherboard is a z590. I have, as far as I can tell disabled Secure Boot. Legacy mode is on. It just does the standard _ in the corner when trying to boot then returns to the boot menu. I assume its trying to boot another drive but I have no idea how to solve that, since the only drive listed in boot is the flash. I do have a PCie LSI card (this is a new type of hardware for me) and I do have an NVMe drive (this is a new type of hardware for me). For the life of me I am stuck and have no idea how to solve it.

Thank you for the full response, it is appreciated. When I stopped using CrashPlan I was uploading about 25TB. For awhile, I maintained the original CrashPlan plugin here (long before docker) haha. They never cared or complained but the RAM usage was stupid and the service was trash. Sounds like that hasn't changed much. Anything of "value" to me is backed up offsite to my parents house on portable drives (photography/music). Everything else is just parity at this point. So although I don't need a backup, it would be nice if catastrophe happened. Probably not nice enough to pay backblaze $400 a month or to spend about $3K in a backup system either though. I might look at google drive as well, as they are unlimited for a small enough business fee.

ok, so effectively a clean docker would have that folder empty? Meaning I can stop docker and delete those folders?

I believe back in the original release of docker you could add a list of paths to repos, which is what I assume the screen shot is showing for me (like the user-template list). I was just wondering what are their by default if you setup a clean unraid server today? I don't have anything installed from any of the above folders so to clean up the UI drop down I wanted to know what is in the list by default.

popping in to see if crashplan is worth trying out again? I haven't used them in about 6 years, and would have 80TB to slowly move to the cloud. Do they still have major RAM issues? Any other options?

I am just doing some cleanup and was wondering what are the default templates installed with a fresh docker? Under templates I have the following and I assume these are from back in the day when the app store wasn't around.

Mainly because its bent. Its taken some abuse in the last 12 years, I'd rather just replace it with something new.

I am in the process of a major system overhaul and wanted to get some best practices. My array will be moved over to the new hardware as it stands, so beyond potentially seeing some v3.3 issues with the shucked drives, I don't have any questions surrounding that (plan to have array off on first boot to make sure drives all load). CACHE Question: My cache is moving from an SSD to a new NVMe drive. Can I just backup my SSD to the array to bring that online or should i bring everything online with the old SSD first? USB Stick: Should I bring everything online with the old USB stick, or can I do the transfer to a new stick at the same time? My old server doesn't support USB3.0 so I can't do it first unfortunately, but my old stick is 12 years old, so its time haha. Any other gotcha's I should know about? I have done a mobo/cpu swap before without issue, but this is the first time I am changing my SATA cards out to HBA cards and doing a lot more, so I am just trying to cover all my bases and not wipe my array haha.

I believe my case can hold 18 drives total, I need to double check that as it will determine if I buy 2 internal only HBA cards or one with some externals for future growth. My storage is full, so unfortunately removing drives isn't really an option as when I replace one I only gain 10TB - 6TB each time. Data hoarding is a serious issue.

i didnt think unraid was planning to support it for awhile (12th)?

Link to build: https://pcpartpicker.com/list/NwdcdD I am looking to upgrade my build for sadly the first time in about 8 years haha (maybe thats a good thing). Anyways, below is the run down, was wondering people's thoughts. I am hoping to hear overkill, since it's a first time in a while and I have a comfortable budget. The server is strictly a Plex/NZBGet/Sonarr/Radarr/Lidarr/various plex plugins machine. At any given time, I have 5-10 connections open to it from family members/friends. Strike thru's are the replaced parts green are parts being purchased CASE: Cooler Master COSMOS II 25th Anniversary Edition XL-ATX Full-Tower CASE MOD: SUPERMICRO CSE-M35T-1B 3 x 5.25" to 5 x 3.5" Hot-swap SATA HDD Trays CPU: Intel i7-2600K Intel i7-11700K CPU COOLING: Cooler Master Hyper 212 Black Edition 42 CFM CPU Cooler MOBO: ASRock Z68 Extreme4 Gen3 Gigabyte Z590 AORUS PRO AX ATX LGA1200 Motherboard MEMORY: 16GB DDR3 G.Skill Ripjaws V 64 GB (2 x 32 GB) DDR4-3600 CL18 Memory PSU: Corsair RM850x W 80+ Gold Certified Fully Modular ATX Power Supply PCIE Cards: SYBA SI-PEX40071 8 Internal SATA III Ports PCI-Express Card, PCI-e x2 Slot I/O Crest 4 Port SATA III PCI-e 2.0 x1 Supermicro AOC-S2308L-L8i PCIe 3.0 (8 internal SATA drives) Genuine LSI 9207-4i4e SAS HBA 6Gbps PCI-E 3.0 (4 internal, 4 external SATA drives) CACHE POOL: WD Black SN850 NVMe 1TB Crucial MX300 750GB PARITY: WD White WD140EDFZ-11A0VA0 14TB 5400rpm ARRAY: Disk 1: WD Red 4TB 5400rpm Disk 2: WD Red 4TB 5400rpm Disk 3: WD Ultrastar 8TB 5400rpm Disk 4: WD Red 8TB 5400rpm Disk 5: WD Blue 4TB 5400rpm Disk 6: WD Ultrastar 8TB 5400rpm Disk 7: WD Ultrastar 8TB 5400rpm Disk 8: WD Ultrastar 8TB 5400rpm Disk 9: HGST Deskstar 5K4000 4TB 5700rpm Disk 10: WD Red 4TB 5400rpm Disk 11: HGST Deskstar 5K4000 4TB 5700rpm Disk 12: TOSHIBA MD04ACA400 4TB 7200rpm Disk 13: WD White WD140EDGZ-11B1PA0 14TB 7200rpm Also, regarding the cache pool... is it recommended? Can I have my appdata on the NVMe drive while my downloads go to my old SSD? Or should I just do the one MVMe drive? EDIT: Changed Motherboard and RAM out to something a bit better.

@shawnngtq, end up liking the build? I am looking to build out nearly the same specs, and noticed this when I was trying to find a motherboard. https://pcpartpicker.com/user/wickedathletes/saved/tKBDZL

For the past few years I have been using unBALANCE to handle this whenever I replace a drive with a larger drive and want to distribute the wealth across the array. Are their better ways to do this, more specifically a more automated way? For example, I just replaced a 4TB drive with a 14TB drive. My array consists of 4, 8 and 14TB drives. Now that I have 15TB free on my server of 82TB total, I would love the ability to click a button and distribute that evenly among my 13 drives in the array, basically giving each drive 1TB+ free.

sorry, what I meant was, for example: 3 libraries, Kid Shows, TV Shows and Movies. I only want to send updates for Movies and TV Shows. Can I specify specific libraries rather than all or nothing?

thanks! can you specify which libraries get updated?

im just gonna buck up and ask the embarrassing question... https://app.plex.tv/desktop#!/server/SERVERID How do I find this, cause I have NO IDEA lol.

EDIT: I am a dolt, I was adding the NVIDIA_VISIBLE field, not using the one provided.... ugh. sorry all. Any thoughts? root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='unmanic' --net='bridge' -e TZ="America/New_York" -e HOST_OS="Unraid" -e 'NVIDIA_VISIBLE_DEVICES'='GPU-BLAHBLAH' -e 'PUID'='99' -e 'PGID'='100' -e 'NVIDIA_VISIBLE_DEVICES'='false' -p '8888:8888/tcp' -v '/mnt/cache/apps/Unmanic':'/config':'rw' -v '/mnt/user/Movies/'\''Twas the Night Before Christmas (1974)/':'/library/movies':'rw' -v '/mnt/user/TV Series/13 Reasons Why/':'/library/tv':'rw' -v '/mnt/user/apps/Unmanic/':'/tmp/unmanic':'rw' --runtime=nvidia 'josh5/unmanic' 73b717099d5e6cb7d21a0d3016d2ad994554444e7e9b73cee01f6d0dd7c42007 /usr/bin/docker: Error response from daemon: OCI runtime create failed: container_linux.go:349: starting container process caused "process_linux.go:449: container init caused "process_linux.go:432: running prestart hook 1 caused \"error running hook: exit status 1, stdout: , stderr: nvidia-container-cli: device error: unknown device id: false\\n\""": unknown. The command failed.

I ended up picking up this: Cool Master COSMO II (25th Anniversary Edition), $199.99, normally $350.00. It only has 3 5.25" bays, but holds 13 internal drives, so 18 in total will fit with a hot swap conversion on the 5.25" bays.

Anything new on the market? It seems like the options are dwindling and I am looking for a case that is 17+ 3.5" drives and ideally 1-2 SSD slots that don't count toward the 17. Antec Nineteen Hundred (17 3.5 bays with 1x5.25" swap) - Not sold XIGMATEK ELYSIUM BLACK (20 with 4x5.25" swaps) - Not sold LIAN LI PC-A79B (20 with 4x5.25" swaps) - Not sold Nanoxia Deep Silence 6 (18 with 1x5.25" swap) - Sold still, but also $300. So what are people using now?

thanks, I think I figured it out. Not really sure why (probably my lack of understanding), but it was the container mapping on radarr. NZBGet was pointing to /mnt/cache/downloads and Radarr was pointing to /mnt/user/downloads. Despite that just being the shared version of the cache drive (to my understanding at least), I switched it over and my img file immediately went down 20 GB. Weirdly enough, CP is pointing to the User share and never caused an issue for me.

ya no idea.. unless Radarr does something weird in a temp folder when it renames a file? No settings in Radarr are doing anything. Its handing off to NZBGet without issue and its definitely Radarr filling it, because i disabled radarr while NZBGet was still running and it stopped filling up. This is the only setting that maybe could do something? not really sure. Also, below are all my other file management settings

ya after you said i might have something wrong I thought about that too, I am checking but so far not sure. The downloads are going to the correct location so I am not sure what would fill it.