insaneavi
-
Posts
30 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by insaneavi
-
-
I ran memtest overnight and it passed.
-
Hello Everyone, i finally gave my unraid server some much needed upgrades
Mobo replaced, cpu replaced, ram and swapped out HSA card from a 8 to a 16
AMD Ryzen 5 3600X 6-Core @ 3800 MHz
Micro-Star International Co., Ltd. PRO B550-VC (MS-7C56) , Version 3.0
LSI 9201-16i IT Mode HBA 8x PCIE 16 Lane SAS Card 6Gbps
The system booted after i recreated the flash drive and added the old config, but when ran a parity to ensure everything is good (no data was added to the array) it was crawling and generating lots of errors, no hardware errors on the drives though.Can anyone shed some light on this? I thought it was the onboard Raid on the motherboard, but i am using the m.2 slot yet.
Last check incomplete on Tue 24 Jan 2023 11:43:12 AM EST (today)
Error code: aborted
Finding 166511 errors
-
32 minutes ago, Michael_P said:
wow this ssd is still at 87
-
Below is the smart data, it is saying 00% remaining but i hope i am reading it wrong.
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.19.17-Unraid] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron Client SSDs
Device Model: Crucial_CT1050MX300SSD1
Serial Number: 164914EE2475
LU WWN Device Id: 5 00a075 114ee2475
Firmware Version: M0CR031
User Capacity: 1,050,214,588,416 bytes [1.05 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5417
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Jan 10 14:47:34 2023 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:
Offline data collection status: (0x04) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1947) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0
5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 000 - 45421
12 Power_Cycle_Count -O--CK 100 100 000 - 88
171 Program_Fail_Count -O--CK 100 100 000 - 0
172 Erase_Fail_Count -O--CK 100 100 000 - 0
173 Ave_Block-Erase_Count -O--CK 087 087 000 - 200
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 30
183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0
184 Error_Correction_Count -O--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 068 047 000 - 32 (Min/Max 14/53)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
202 Percent_Lifetime_Remain ----CK 087 087 001 - 13
206 Write_Error_Rate -OSR-- 100 100 000 - 0
246 Total_LBAs_Written -O--CK 100 100 000 - 204639999184
247 Host_Program_Page_Count -O--CK 100 100 000 - 6394999975
248 FTL_Program_Page_Count -O--CK 100 100 000 - 3110043281
180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 4434
210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warningGeneral Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 16383 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x24 GPL R/O 8000 Current Device Internal Status Data log
0x25 GPL R/O 8000 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 GPL VS 35328 Device vendor specific log
0xa1 GPL,SL VS 3 Device vendor specific log
0xa2 GPL,SL VS 1 Device vendor specific log
0xa3 GPL VS 13824 Device vendor specific log
0xa4 GPL VS 354 Device vendor specific log
0xa4 SL VS 98 Device vendor specific log
0xa5 GPL VS 8000 Device vendor specific log
0xa5 SL VS 64 Device vendor specific log
0xa6 GPL VS 8000 Device vendor specific log
0xa6 SL VS 64 Device vendor specific log
0xa7-0xdf GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data TransferSMART Extended Comprehensive Error Log Version: 1 (16383 sectors)
No Errors LoggedSMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0xff) Completed without error 00% 45419 -
# 2 Vendor (0xff) Completed without error 00% 45321 -
# 3 Vendor (0xff) Completed without error 00% 44821 -
# 4 Vendor (0xff) Completed without error 00% 44514 -
# 5 Vendor (0xff) Completed without error 00% 43743 -
# 6 Vendor (0xff) Completed without error 00% 43023 -
# 7 Vendor (0xff) Completed without error 00% 42739 -
# 8 Vendor (0xff) Completed without error 00% 41960 -
# 9 Vendor (0xff) Completed without error 00% 41150 -
#10 Vendor (0xff) Completed without error 00% 40362 -
#11 Vendor (0xff) Completed without error 00% 40251 -
#12 Vendor (0xff) Completed without error 00% 40162 -
#13 Vendor (0xff) Completed without error 00% 39395 -
#14 Vendor (0xff) Completed without error 00% 38618 -
#15 Vendor (0xff) Completed without error 00% 37790 -
#16 Vendor (0xff) Completed without error 00% 37015 -
#17 Vendor (0xff) Completed without error 00% 36190 -
#18 Vendor (0xff) Completed without error 00% 35378 -
#19 Vendor (0xff) Completed without error 00% 34598 -SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: SMART Off-line Data Collection executing in background (4)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 20/41 Celsius
Lifetime Min/Max Temperature: 14/53 Celsius
Under/Over Temperature Limit Count: 0/0SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: -5/75 Celsius
Temperature History Size (Index): 478 (14)Index Estimated Time Temperature Celsius
15 2023-01-10 06:50 27 ********
... ..( 6 skipped). .. ********
22 2023-01-10 06:57 27 ********
23 2023-01-10 06:58 28 *********
24 2023-01-10 06:59 28 *********
25 2023-01-10 07:00 27 ********
26 2023-01-10 07:01 27 ********
27 2023-01-10 07:02 28 *********
... ..( 40 skipped). .. *********
68 2023-01-10 07:43 28 *********
69 2023-01-10 07:44 27 ********
70 2023-01-10 07:45 28 *********
71 2023-01-10 07:46 28 *********
72 2023-01-10 07:47 27 ********
73 2023-01-10 07:48 28 *********
74 2023-01-10 07:49 27 ********
... ..( 3 skipped). .. ********
78 2023-01-10 07:53 27 ********
79 2023-01-10 07:54 28 *********
80 2023-01-10 07:55 28 *********
81 2023-01-10 07:56 28 *********
82 2023-01-10 07:57 27 ********
83 2023-01-10 07:58 28 *********
... ..( 39 skipped). .. *********
123 2023-01-10 08:38 28 *********
124 2023-01-10 08:39 27 ********
125 2023-01-10 08:40 28 *********
126 2023-01-10 08:41 27 ********
... ..( 6 skipped). .. ********
133 2023-01-10 08:48 27 ********
134 2023-01-10 08:49 28 *********
... ..( 27 skipped). .. *********
162 2023-01-10 09:17 28 *********
163 2023-01-10 09:18 27 ********
164 2023-01-10 09:19 27 ********
165 2023-01-10 09:20 27 ********
166 2023-01-10 09:21 28 *********
167 2023-01-10 09:22 27 ********
... ..( 6 skipped). .. ********
174 2023-01-10 09:29 27 ********
175 2023-01-10 09:30 28 *********
176 2023-01-10 09:31 27 ********
177 2023-01-10 09:32 28 *********
... ..( 32 skipped). .. *********
210 2023-01-10 10:05 28 *********
211 2023-01-10 10:06 27 ********
212 2023-01-10 10:07 27 ********
213 2023-01-10 10:08 28 *********
214 2023-01-10 10:09 27 ********
215 2023-01-10 10:10 27 ********
216 2023-01-10 10:11 28 *********
217 2023-01-10 10:12 28 *********
218 2023-01-10 10:13 27 ********
... ..( 2 skipped). .. ********
221 2023-01-10 10:16 27 ********
222 2023-01-10 10:17 28 *********
223 2023-01-10 10:18 28 *********
224 2023-01-10 10:19 28 *********
225 2023-01-10 10:20 27 ********
226 2023-01-10 10:21 27 ********
227 2023-01-10 10:22 28 *********
... ..( 25 skipped). .. *********
253 2023-01-10 10:48 28 *********
254 2023-01-10 10:49 27 ********
... ..( 32 skipped). .. ********
287 2023-01-10 11:22 27 ********
288 2023-01-10 11:23 28 *********
289 2023-01-10 11:24 27 ********
290 2023-01-10 11:25 27 ********
291 2023-01-10 11:26 28 *********
292 2023-01-10 11:27 28 *********
293 2023-01-10 11:28 27 ********
... ..( 10 skipped). .. ********
304 2023-01-10 11:39 27 ********
305 2023-01-10 11:40 ? -
306 2023-01-10 11:41 ? -
307 2023-01-10 11:42 21 **
308 2023-01-10 11:43 21 **
309 2023-01-10 11:44 21 **
310 2023-01-10 11:45 22 ***
311 2023-01-10 11:46 23 ****
312 2023-01-10 11:47 22 ***
... ..( 3 skipped). .. ***
316 2023-01-10 11:51 22 ***
317 2023-01-10 11:52 23 ****
... ..( 8 skipped). .. ****
326 2023-01-10 12:01 23 ****
327 2023-01-10 12:02 24 *****
... ..( 8 skipped). .. *****
336 2023-01-10 12:11 24 *****
337 2023-01-10 12:12 25 ******
... ..( 19 skipped). .. ******
357 2023-01-10 12:32 25 ******
358 2023-01-10 12:33 26 *******
359 2023-01-10 12:34 25 ******
360 2023-01-10 12:35 26 *******
... ..(114 skipped). .. *******
475 2023-01-10 14:30 26 *******
476 2023-01-10 14:31 30 ***********
477 2023-01-10 14:32 32 *************
0 2023-01-10 14:33 28 *********
... ..( 9 skipped). .. *********
10 2023-01-10 14:43 28 *********
11 2023-01-10 14:44 27 ********
... ..( 2 skipped). .. ********
14 2023-01-10 14:47 27 ********SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 88 --- Lifetime Power-On Resets
0x01 0x010 4 45421 --- Power-on Hours
0x01 0x018 6 204639999184 --- Logical Sectors Written
0x01 0x020 6 327334226 --- Number of Write Commands
0x01 0x028 6 468898091376 --- Logical Sectors Read
0x01 0x030 6 575999860 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 252 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 32 --- Current Temperature
0x05 0x010 1 34 --- Average Short Term Temperature
0x05 0x018 1 - --- Average Long Term Temperature
0x05 0x020 1 53 --- Highest Temperature
0x05 0x028 1 14 --- Lowest Temperature
0x05 0x030 1 39 --- Highest Average Short Term Temperature
0x05 0x038 1 19 --- Lowest Average Short Term Temperature
0x05 0x040 1 - --- Highest Average Long Term Temperature
0x05 0x048 1 - --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 291 --- Number of Hardware Resets
0x06 0x010 4 112 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 13 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized valuePending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET -
Is there a docker to plugin that can access to the array that can give me the estimated remaining life percentage of my SSD which is being used a cache drive?
-
5 minutes ago, jbrodriguez said:
Ok, remove the contents of the file (/boot/config/plugins/unbalance/unbalance.conf), but leave it there (an empty file).
Then start it from the command line again.
Thank you!, it now runs properly, I was also able to stop the service, then turn it back on via the web interface!
-
7 minutes ago, jbrodriguez said:
Not really.
So, if you try
$ cd /usr/local/emhttp/plugins/unbalance $ ./unbalance
it comes up empty again ?
root@TOPSITE:~# cd /usr/local/emhttp/plugins/unbalance
root@TOPSITE:/usr/local/emhttp/plugins/unbalance# ./unbalance
configuration variable provided but not defined: SERVICE
Usage of ./unbalance:
-apiFolders string
folders to look for api endpoints (default "/var/local/emhttp")
-config string
config location (default "/boot/config/plugins/unbalance/unbalance.conf")
-dryRun
perform a dry-run rather than actual work (default true)
-folders string
deprecated - do not use
-log string
pathname where log file will be written to (default "/boot/logs/unbalance.log")
-notifyCalc int
notify via email after calculation operation has completed (unraid notifications must be set up first): 0 - No notifications; 1 - Simple notifications; 2 - Detailed notifications
-notifyMove int
notify via email after move operation has completed (unraid notifications must be set up first): 0 - No notifications; 1 - Simple notifications; 2 - Detailed notifications
-port string
port to run the server (default "6237")
-rsyncFlags string
custom rsync flags
root@TOPSITE:/usr/local/emhttp/plugins/unbalance#
it now gives me the above results
log entry when trying to enable:Jun 28 20:15:41 TOPSITE php: /usr/local/emhttp/plugins/unbalance/scripts/start
Jun 28 20:15:41 TOPSITE sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=nobody ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/unbalance/unbalance -port 6237 -
9 minutes ago, jbrodriguez said:
This is the problem here. The executable isn't starting.
This used to be an issue in 1.8.x, but it was "solved"
I believe that installing via the github link doesn't create the conf file it expects, although it should work without one.
Try the following :
$ nano /boot/config/plugins/unbalance/unbalance.conf # <paste the following> SERVICE="disable" PORT="6237" RUNAS="nobody" # click control + x, then y, then <enter> to save the file
Then go the settings page and enable the server.
tried it, same issue:root@TOPSITE:/boot/config/plugins/unbalance# ls
unbalance-3.0.0.tgz* unbalance.cfg* unbalance.conf*
root@TOPSITE:/boot/config/plugins/unbalance#
I was able to create the .conf file and save with the above code, but still unable to start it.
Do i need to reboot the server after creating the conf file?
here is the system log
Jun 28 20:05:33 TOPSITE php: /usr/local/emhttp/plugins/unbalance/scripts/start
Jun 28 20:05:33 TOPSITE sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=nobody ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/unbalance/unbalance -port 6237
-
34 minutes ago, jbrodriguez said:
I will check if this causes trouble.
Do you mean that all the buttons are disabled ?
If that's the case, follow the quick start instructions.
If that's not the case, please do the following
$ killall unbalance $ cd /usr/local/emhttp/plugins/unbalance $ ./unbalance
and post the output here to check it out.
I have also attached what the web inference displays when i try to start the application.
as requested:root@TOPSITE:/usr/local/emhttp/plugins/unbalance# killall unbalance
unbalance: no process found
root@TOPSITE:/usr/local/emhttp/plugins/unbalance# cd /usr/local/emhttp/plugins/unbalance
root@TOPSITE:/usr/local/emhttp/plugins/unbalance# ./unbalance
root@TOPSITE:/usr/local/emhttp/plugins/unbalance# ls
CHANGES VERSION event/ img/ scripts/ unbalance.page
README.md app/ images/ index.html unbalance* unbalance.png -
Just learned about this great plug in as i want to convert my disks from reiserfs to xfs, i am running unraid 6.35 and have installed the plugin unBALANCE v3.0.0, but i am unable to get the status of it to change from Stopped, i have tried run as user with root and other users that have full read/write to the disks.
I installed the plugin via the github link
this is the only entry i can find in the log when i try to start the plugin.
Jun 28 18:04:02 TOPSITE php: /usr/local/emhttp/plugins/unbalance/scripts/stop
Jun 28 18:04:10 TOPSITE php: /usr/local/emhttp/plugins/unbalance/scripts/start
Jun 28 18:04:10 TOPSITE sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=root ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/unbalance/unbalance -port 6237
Jun 28 18:04:49 TOPSITE kernel: usb 4-2: USB disconnect, device number 16
Jun 28 18:04:51 TOPSITE kernel: usb 4-2: new low-speed USB device number 17 using ohci-pci
Jun 28 18:04:51 TOPSITE kernel: input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:0461:4E22.0011/input/input21
Jun 28 18:04:51 TOPSITE kernel: hid-generic 0003:0461:4E22.0011: input,hidraw1: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:12.0-2/input0
Jun 28 18:05:45 TOPSITE kernel: usb 4-2: USB disconnect, device number 17
Jun 28 18:05:46 TOPSITE kernel: usb 4-2: new low-speed USB device number 18 using ohci-pci
Jun 28 18:05:46 TOPSITE kernel: input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-
Download of appfeed failed error on Apps tab
in Plugin System
Posted
This is down again. - https://github.com/Squidly271/AppFeed shows a change was made around the same time this went down