galego100
-
Posts
33 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by galego100
-
-
-
Hello , today i receive the Broadcom 9300-16i SATA / SAS HBA Controller IT-Mode 12Gb PCIe x8 LSI , with IT mode for Unraid accordingly to seller from ebay.
Now i have doubt regarding power, the board is just powered by the PCI slot ? Or i have to connect 6 pin cable to power it?
My motherboard is a Gigabyte Z390 UD.
On the attached image, i guess it´s a power socket?
-
21 minutes ago, JorgeB said:
I guess by this you mean an external SAS enclosure, not a SAS disk?
In any case, if you don't have parity, you can do a new config and keep using the remaining disks.
Yes , you are right...It´s a SAS enclosure, a PCI one...
-
3 hours ago, JorgeB said:
Not sure I follow, do you have parity?
No , i don´t have.... But the 8 disks are all full with movies .... if i add them again it won´t show up the movies ? The share are the same.
Imagine , i have a share named movies with 1000 movies with 2 disks. 500 movies per disk . If i take back one disk , it will show only 500 movies, later , if i add the other disk again , it will show the 1000 again? The disks were not formated,, they just not connected because of the faulty old SAS board.
So , to put it up the server again, when i boot it, it show it , the missing disks, i have to perform new config , without erasing the others disks. I guess when the new SAS arrive, i stop the array , shutdown server, connect the disks , and add it again... -
Hello ,
My SAS delivery his soul to the creator , now i´m waiting a new one... My server have 14 disks , so , i have to put aside 8 disks , and create new config with 6 disks. I have a share with movies, the library now is incomplete( it only shows the movies from the 6 disks) until the new SAS arrive, when it arrive i will recover all the movies on the other 8 disks , right? i just have to add to the array pool again , and everything will be ok?
-
On 2/26/2024 at 7:13 AM, ChatNoir said:
It is advertised as IT-Mode so probably already done.
Thank you,
Is there any known issues with Broadcom 9300-16i SATA ?
Broadcom LSI 9300-16i 16-Port 12Gb/s SAS/SATA HBA ZFS TrueNAS UnRAID IT Mode | eBay
-
Hello ,
SAS Controller LSI 9201-8i need to be flashed?
-
5 minutes ago, JorgeB said:
Replace or swap cables with a different disk.
I´ve already done that. And the cables are ok.
Which SAS cables you recomend?
-
7 hours ago, apandey said:
Shutdown the server and check all cables are properly seated. If you can, try replacing the data and power cable for that particular drives
If you still end up with same end result, post diagnostics
Hello , the problem persists.
Diagnostics attached
-
OK. Later i will try it.
Thank you
-
Hello,
Yesterday after a reboot of the server, one of my disks of the array , don´t let assigned again on the array .
It appear to sign it , but when i try it , it doesn´t work , and the only option is format . I only have movies on these disk , it´s a 16tb disk , before i format, do i have a chance to see the content ? I just wabt to know what movies are, to download it again.I found the main cause, , i was making some maintenance on the case , and somehow i touch on the power cable of these disk , which provocate a reboot...
Thw weird thing, is if try to assigned it ( first photo), the disk appear on the list, after i try iy, it won´t assigned anb dissapear from the list ( second photo), Only if i reboot again , it will show on the list. Photos attached.
Is there a way to show the content? Or after the format i have a way to ( with software ) not to recover , but to see the content?
thanks -
1 hour ago, ChatNoir said:
You might have to check that the shares settings are OK for you.
Could you elaborate more?
-
Thank you so much . When i arrive home , i will try it.
When i finish all, i can delete the older shares? (music 1, music 2... movies 1, movies 2...)
The quotation marks are to write on the command?
-
1 hour ago, JorgeB said:
If the shares have data you can just rename the folders, if they are empty delete those shares.
How ? If i want to have only one share for movies , and now i have 6 shares for movies, one per disk... They are not empty...
My goal is one share for movies with all disks included on it , without deleting the content of 6 disks to perform it...
-
Hello,
I have 6 disks of 12 tb on my server . Each one have 2 folders (Movie + Music) . So wrongly i create 6 shares of movie ( movie 1 , movie 2 , movie 3 ... movie 6) and 6 shares of music( music 1 , music 2... music 6 ) .
I want to create only one share for movies and one for music, and assign all 6 disks to this 2 shares.
I don´t want to erase/format the disks to do it... So i can´t eliminate the 12 shares( music+movies ) without format all the 6 disks??!
Which is the easy way ? Buy a new disk , and start from here, use this new one to create copys and create one single share for music and other for movies?
-
I guess it lost boot order too... weird...
i´m going to check the bios
-
I can´t because i restart the server , and now it won´t find it
-
Hello,
i just arrived from work , and my server get this error, won´t load my licence key... I will lost all my configs??!!!
-
But 96gb is not too much??!!
-
Hello ,
I add a new drive to my pool . Format on XFS, and is empty but shows 96gb used?!!??? Is a 14tb drive.
Is something wrong , that i´m not figure out??!!
-
The problem is the IP to put on the subnet on custom br0.
I don´t know which one. When i had the server connected directly to the router was very simple to put the IP on custom br0 , i only had to put almost the tower ip and the last two digits i choose accordingly with the dockers i had... Now it doesn´t work in that way....
-
Now i can make the dockers work if i don´t choose the network type " Custom br0". If i choose bridge everything is ok. I always choose custom br0, and always works, could be the server is no more connected to the router??!!
-
No one could give a clue, a little help?
-
Last night i had to move my server from bedroom to office. So in my bedroom the server was directly connected to the router, and have a Ip address 192.168....
When i start the server in my office , (it´s connected to a RJ45 plug on the wall, swich on ATI to send gigabyte signals to all divisions), all of my dockers won´t run gave Execution error, server error( image attached), i guess it´s the IP was change it, and the dockers have the old IP...
The tower also dissapeared from my network explorer on windows, if i right on the address tab \\tower , tower folder open.
The new ip of tower on my bedroom is very of course different than the one i had on router directly connection.
I try the workaround of stop docker, delete docker img, start again, add container , put the new fixed ip on docker, apply, the execution error disapeared , but the docker don´t run , the state is "start", but the webUI won´t open( image attached).
I ´m loosing my mind with all of this!! Sorry for the long post.
Recommended controllers for Unraid
in Storage Devices and Controllers
Posted
Thanks . I will not use a graphics cards, so i will use the GPU PCI slot . My disks are 8 mechanicals 3.5 .