xyzeratul

Main页面，点Flash，进去拉到最后，选择你想启动的模式

直接把硬盘取下来，通过unassigned devices挂载到unraid上面，然后通过rsync拷贝，这是我能想到最快的方法。

有可能是qb本身爆缓存的问题，这个网上有很多案例。 和UNRAID什么下载到硬盘还是SSD之类的关系不大，至少我都试过，卡IO是可能出现，但不会在配置稍微好点的机器上有。 还有一种原因就是UNRAID在6.12时期反复出现的docker和网络问题，我的一台机器遇到过，这里列出来你可以看下是不是也中了招： 网卡是小螃蟹的8125B，在6.12版本中改用了ipvlan（6.12.5后安装默认就是ipvlan)，qb下载直接CPU占满。 停掉docker和阵列，把网络改为macvlan，安装第三方8125B驱动，重启，qb下载CPU恢复正常。

1，可以，修改syslinux.cfg文件就行了，老版本需要手动修改配置文件，6.12.6后面直接在系统菜单里面改就行了 2，这个据我所知还没有办法，只能重启 3，会有少许性能影响

在同一个局域网下面，最方便的方法是rsync对拷， 抽取硬盘的方法也可以用，但要特别小心两台机器里面硬盘池里面有没有校验盘。

My setup for the media share folder, using settings like this, from a SSD to a HDD, mover start every 48 hours The work flow is like this: qb downloads movies and tv to /media/downloads, other apps automatically hardlink the file, send to /media/movies or /media/tv, so emby can read these. My question is, what happens when the mover starts, will the moved files still keep their hardlink?

至少补充下情况或者log啊，启动后是什么都没做就失联吗？

OK, I think the Qbittorrent is the root cause, don't know why but since I stopped running this one, everything has been fine for a week.

不需要，这就和其他品牌NAS提供的服务一样，给你一个方便远程连接NAS的方法，如果你有其他方法比如内网穿透，公网IP或者干脆不在内网以外的地方使用，完全可以不用官方这个插件。 PS: 这个插件还带一个U盘远程备份功能。

OK, then I need to figure out what this error means in the meantime

I just noticed there is a lot of error in log : Is this related to my problem?

OK I will try that, I think it maybe the Qbittorrent, but I am not sure yet, will stop it for a few days.

I have this problem for awhile now, unraid web UI sometimes not responding, but all the dockers are fine, and when I finally can login, I find the CPU spike at 100%, don't know what cause these problem, but this start happen when I upgraded to 6.12.5 and now I am on 6.12.10, and it still happens from time to time. attacting a diagnostics file for reference 185409-diagnostics-20240604-2159.zip

I have a docker container running 24/7, but it needs to restart after a few days, so is there a plugin or setting can automatic doing this?

如果你要反代，那证书应该用反代软件管理（NPM或者lucky之类的）,如果你要直接访问unraid，在设置里面打开TLS，然后用你自己的证书替换flash/config/ssl/certs里面的XXXXXX_bundle.pem文件里面内容。

反代安全性不如VPN，但是通用性比较好。 Lucky之类的反代申请证书也不需要是443端口，我以前用自定义端口都能自动申请和续期，还比较方便，因为使用其实都是一个导航页过去。

SSH进控制台 输入ifconfig查看使用的网卡和mac，单网卡模式下一般是eth0 输入ethtool -s eth0 wol g，把wol模式改为g 输入 echo -n mem > /sys/power/state，改电源模式 或者用插件设置，可以用更灵活的休眠模式 安装一个Dynamix S3 Sleep插件，设置里面Set WOL options before sleep:改成g。

I usually stay in a rented house or apartment when I work abroad, so port forward isn't a problem, portable SSD is just too small(usually 2T). X-ray? I didn't consider that, so it would affect the SSD?

Just an idea for now, still on the fence about this one: My job requires me to stay in a foreign country for at least 4 months every year, most of them don't have great internet or just too far from my home NAS, so I plan to build a mini NAS with me, my goal is small, silent, and offer a bigger storage space than a portable drive, can run some basic services in LAN, like emby. Currently considering the build: CWWK P5 N100 nanoboard 16GB DDR5 RAM 2 * intel S4510 2TB SATA SSD(retired server ones) EXCERIA NVMe RD20 2TB 3D printed case It's an all-SDD NAS, but I am still on the fence because the SSD is a bit expensive right now and a single bay 3.5 HDD NAS can easily beat it in pure storage(with a slightly bigger size). And I don't know how unraid would perform in an all-SSD setup.

Yes I am sure, I don't have "Plugins Error", only notifications. OK I will test the new version for a few days see how it goes, Thank you

during the upgrade to 6.12.10, unraid shows it failed to install new version of this plugin(which I am sure it was already the lastest version), then it shows the uninstallation of this plugin somehow? Then I wait for the notice about upgrade finishing, reboot, the driver is gone, and everything still working.

Do I still need this driver when I upgrade to 6.12.10, during the update it auto uninstalled this driver

升级系统一般不会造成数据丢失，除非出现大问题， 升级前最好检查更新插件和docker 用Fix Common Problems插件里面自带的Update Assistant检查下不兼容的插件和设置，修改下就行了。 升级系统前，用unraid自带的功能备份系统U盘，然后升级后测试阵列读取，然后测试docker和虚拟机运行，如果不行可以直接恢复老版本系统。

把硬盘C装到其他空的槽位 暂停虚拟机和DOCKER之类的程序运行 转移数据到硬盘C 关机，移除硬盘B 开机，重建阵列配置 修改硬盘C上面的目录结构，保持和原硬盘B一致或者重新修改DOCKER和虚拟机里面的文件路径映射

好像网上传闻说S4500系列有啥暴雷的，不知道是什么情况